Honda Civic. Manual — part 1083
Is DTC 12-11, 14-11, 16-11, and/or 18-11 indicated?
YES -lf the DTC 12-12,14-12,16-12, or 18-12 is indicated at the same time, do
the DTC 12-12, 14-12,16-12, or 18-12 troubleshooting (see DTC 12-12:
Right-front Wheel Speed Sensor Short to the Other Sensor Circuit; DTC
14-12: Left-front Wheel Speed Sensor Short to the Other Sensor Circuit;
DTC 16-12: Right-rear Wheel Speed Sensor Short to the Other Sensor
Circuit; DTC 18-12: Left-rear Wheel Speed Sensor Short to the Other
Sensor Circuit ). If DTC 12-12, 14-12,16-12 or 18-12 is not indicated, go to
step 5.
NO -Troubleshoot the indicated DTC. If there are no DTCs indicated, there
may be an intermittent failure, the system is OK at this time. Check for loose
terminals between the wheel speed sensor 2P connector and the VSA
modulator-control unit 37P connector. Refer to INTERMITTENT
FAILURES TROUBLESHOOTING (see ).
5. Turn the ignition switch to LOCK (0).
6. Check that the appropriate wheel speed sensor is properly mounted (see
WHEEL SPEED SENSOR REPLACEMENT ).
DTC REFERENCE
Is the wheel speed sensor installation OK?
YES -Check for loose terminals in the VSA modulator-control unit 37P
connector. If necessary, substitute a known-good VSA modulator-control unit
(see VSA MODULATOR-CONTROL UNIT REMOVAL AND
INSTALLATION ), and retest.
NO -Reinstall the wheel speed sensor, and check the mounting position (see
DTC Appropriate Wheel Speed Sensor
12-11
Right-front
14-11
Left-front
16-11
Right-rear
18-11
Left-rear
2008 Honda Civic GX
2006-08 BRAKES VSA System - Civic (All Except Hybrid)
WHEEL SPEED SENSOR REPLACEMENT ).
DTC 12-12: RIGHT-FRONT WHEEL SPEED SENSOR SHORT TO THE OTHER SENSOR
CIRCUIT; DTC 14-12: LEFT-FRONT WHEEL SPEED SENSOR SHORT TO THE OTHER SENSOR
CIRCUIT; DTC 16-12: RIGHT-REAR WHEEL SPEED SENSOR SHORT TO THE OTHER SENSOR
CIRCUIT; DTC 18-12: LEFT-REAR WHEEL SPEED SENSOR SHORT TO THE OTHER SENSOR
CIRCUIT
1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS.
3. Test-drive the vehicle. Drive the vehicle at 13 mph (20 km/h) or more, and go a
distance of 328 ft (100 m) or more.
4. Check for DTCs with the HDS.
Is DTC 12-12, 14-12, 16-12, and/or 18-12 indicated?
YES -Go to step 5.
NO -Intermittent failure, the system is OK at this time. Check for loose
terminals between the wheel speed sensor 2P connector and the VSA
modulator-control unit 37P connector. Refer to INTERMITTENT
FAILURES TROUBLESHOOTING (see ).
5. Turn the ignition switch to LOCK (0).
6. Disconnect VSA modulator-control unit 37P connector.
7. Check for continuity between the appropriate VSA modulator-control unit 37P
connector wheel speed sensor +B terminals (see table).
DTC REFERENCE
NOTE:
Drive the vehicle on the road, not on the lift.
DTC
VSA Modulator-control Unit 37P Connector Terminal No.
Appropriate Terminal
Other Terminals
12-12
No. 19
No. 22
No. 9
No. 20
14-12
No. 22
No. 19
No. 9
No. 20
16-12
No. 9
No. 19
No. 22
No. 20
2008 Honda Civic GX
2006-08 BRAKES VSA System - Civic (All Except Hybrid)
Fig. 23: Checking Continuity Between Appropriate VSA Modulator-
Control Unit 37P Connector Wheel Speed Sensor +B Terminals
Is there continuity?
YES -Repair short in the wires between the appropriate wheel speed sensor
and the VSA modulator-control unit.
NO -Check for loose terminals in the VSA modulator-control unit 37P
18-12
No. 20
No. 19
No. 22
No. 9
2008 Honda Civic GX
2006-08 BRAKES VSA System - Civic (All Except Hybrid)
connector. If necessary, substitute a known-good VSA modulator-control unit
(see VSA MODULATOR-CONTROL UNIT REMOVAL AND
INSTALLATION ), and retest.
DTC 12-21: RIGHT-FRONT WHEEL SPEED SENSOR INSTALLATION ERROR; DTC 14-21: LEFT-
FRONT WHEEL SPEED SENSOR INSTALLATION ERROR; DTC 16-21: RIGHT-REAR WHEEL
SPEED SENSOR INSTALLATION ERROR; DTC 18-21: LEFT-REAR WHEEL SPEED SENSOR
INSTALLATION ERROR
1. Test-drive the vehicle. Drive the vehicle at 7 mph (10 km/h).
2. Check the RF, LF, RR, LR WHEEL SPD in the VSA DATA LIST with the
HDS.
Are all four the same indicated value?
YES -Intermittent failure, the system is OK at this time. Check for loose
terminals between the wheel speed sensor 2P connector and the VSA
modulator-control unit 37P connector. Refer to INTERMITTENT
FAILURES TROUBLESHOOTING (see ).
NO -Go to step 3.
3. Turn the ignition switch to LOCK (0).
4. Check that the appropriate wheel speed sensor is properly mounted (see
WHEEL SPEED SENSOR REPLACEMENT ).
DTC REFERENCE
Is the wheel speed sensor installation OK?
NOTE:
Drive the vehicle on the road, not on the lift.
DTC Appropriate Wheel Speed Sensor
12-21
Right-front
14-21
Left-front
16-21
Right-rear
18-21
Left-rear
2008 Honda Civic GX
2006-08 BRAKES VSA System - Civic (All Except Hybrid)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст