Honda Civic. Manual — part 378
THERMOSTAT HOUSING REMOVAL AND INSTALLATION
REMOVAL
1. Drain the engine coolant, refer to the THERMOSTAT REPLACEMENT .
2. Remove the air cleaner housing assembly, refer to the AIR CLEANER
REMOVAL/INSTALLATION .
3. Remove the harness bracket (A), and cover the air fuel ratio (A/F) sensor
connector and secondary heated oxygen sensor (secondary HO2S) connector
with a tape to protect the connectors from engine coolant, then remove the
lower radiator hose (B), the water bypass hoses (C), and the heater hose (D).
Fig. 2: Identifying Harness Bracket, Radiator Hose, Water Bypass Hoses
And Heater Hose
4. Remove the thermostat housing.
2008 Honda Civic GX
2006-08 ENGINE Cooling System - Civic GX
Fig. 3: Identifying Thermostat Housing With Bolts
5. Remove the exhaust gas recirculation (EGR) plate (A), thermostat cover (B),
and thermostat (C).
Fig. 4: Identifying Exhaust Gas Recirculation (EGR) Plate, Thermostat
Cover And Thermostat
INSTALLATION
1. Install the new rubber seal (A) onto the thermostat, then install the thermostat
(B) with pin (C) up, and install the thermostat cover (D).
2008 Honda Civic GX
2006-08 ENGINE Cooling System - Civic GX
Fig. 5: Identifying Rubber Seal, Thermostat, Pin And Thermostat Cover
2. Install the EGR plate (E) with a new gasket (F).
3. Install the thermostat housing (A), using a new gasket (B) and new O-ring (C).
Fig. 6: Identifying Thermostat Housing, Gasket And O-Ring
4. Install the lower radiator hose (A), heater hose (B), and water bypass hoses
(C), then install the harness bracket (D).
2008 Honda Civic GX
2006-08 ENGINE Cooling System - Civic GX
Fig. 7: Identifying Lower Radiator Hose, Heater Hose And Water Bypass
Hoses
5. Install the air cleaner housing assembly, refer to the AIR CLEANER
REMOVAL/INSTALLATION .
6. Refill the radiator with engine coolant, and bleed the air from the cooling
system with the heater valve open, refer to the COOLANT
REPLACEMENT .
FUEL PRESSURE REGULATOR THERMOSTAT REPLACEMENT
1. Remove the cowl panel and under-cowl cover, refer to the COWL COVER
REPLACEMENT .
2. Remove the water bypass hoses (A) from the fuel pressure regulator
thermostat, then plug the hoses.
2008 Honda Civic GX
2006-08 ENGINE Cooling System - Civic GX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст