Honda Civic. Manual — part 861

Fig. 28: Identifying Engine Wire Harness Cover On Lock Tab
Courtesy of AMERICAN HONDA MOTOR CO., INC.

13. Attach the engine hanger (A) to the threaded holes in the cylinder head.

Fig. 29: Identifying Engine Hanger
Courtesy of AMERICAN HONDA MOTOR CO., INC.

14. Install the front leg assembly (A), hook (B), and wingnut (C) from an A and

Reds engine support hanger (AAR-T-12566) onto the 2006 Civic engine
hanger. Carefully position the engine hanger on the vehicle, and attach the
hook to the forward hole in the engine hanger/adapter (D). Tighten the wingnut
by hand to lift and support the engine/transmission assembly.

NOTE:

Use care when working around the windshield.

2008 Honda Civic LX

2006-08 TRANSMISSION Manual Transmission (6-Speed)(Except Hybrid) - Civic

Fig. 30: Identifying Front Leg Assembly With Hook And Wingnut
Courtesy of AMERICAN HONDA MOTOR CO., INC.

15. Remove the two upper transmission mounting bolts.

Fig. 31: Identifying Upper Transmission Mounting Bolts
Courtesy of AMERICAN HONDA MOTOR CO., INC.

16. Remove the under-hood fuse/relay box (A) by lifting up on the lock tabs (B),

then move it aside.

2008 Honda Civic LX

2006-08 TRANSMISSION Manual Transmission (6-Speed)(Except Hybrid) - Civic

Fig. 32: Identifying Under-Hood Fuse/Relay Box On Lock Tabs
Courtesy of AMERICAN HONDA MOTOR CO., INC.

17. Remove the engine control module (ECM) stay (A), then move it aside.

Remove the clutch line clamp (B).

Fig. 33: Identifying Engine Control Module (ECM) Stay And Clutch Line
Clamp
Courtesy of AMERICAN HONDA MOTOR CO., INC.

18. Disconnect the ground cable (A), then remove the transmission mount bracket

bolts (B) and nuts (C). Remove the transmission mount bracket (D).

2008 Honda Civic LX

2006-08 TRANSMISSION Manual Transmission (6-Speed)(Except Hybrid) - Civic

Fig. 34: Identifying Transmission Mount Bracket Bolts And Nuts
Courtesy of AMERICAN HONDA MOTOR CO., INC.

19. Raise the vehicle on the lift.
20. Remove the splash shield.

Fig. 35: Identifying Splash Shield And Bolts
Courtesy of AMERICAN HONDA MOTOR CO., INC.

21. Drain the transmission fluid. Reinstall the drain plug with a new washer (see

TRANSMISSION FLUID INSPECTION AND REPLACEMENT ).

22. Separate the lower arm (see step 5 on DRIVESHAFT REMOVAL ).
23. Remove the stiffner plate (A) and mounting bracket (B) from the steering

2008 Honda Civic LX

2006-08 TRANSMISSION Manual Transmission (6-Speed)(Except Hybrid) - Civic