Honda Civic. Manual — part 535
28. Connect the lower arms to the knuckles, refer to step 9 on LOWER ARM
REMOVAL/INSTALLATION .
29. Connect the stabilizer links, refer to STABILIZER LINK
REMOVAL/INSTALLATION .
30. Install exhaust pipe A. Use new gaskets (B) and new self-locking nuts (C).
Fig. 48: Identifying Exhaust Pipe Self-Locking Nuts (With Torque
Specifications)
31. Install the splash shield.
2008 Honda Civic GX
2006-08 ENGINE Engine Assembly - Civic GX
Fig. 49: Identifying Splash Shield Clips
32. Lower the vehicle on the lift.
33. Install the heater hoses.
Fig. 50: Identifying Heater Hoses
34. Install the A/C compressor (A).
Fig. 51: Identifying A/C Compressor And Bolts (With Torque
Specifications)
35. Connect the A/C compressor clutch connector (B), then install the harness
2008 Honda Civic GX
2006-08 ENGINE Engine Assembly - Civic GX
clamp (C).
36. Install the drive belt, refer to DRIVE BELT REMOVAL/INSTALLATION .
37. Remove the bulkhead, then install the radiator, refer to RADIATOR AND
FAN REPLACEMENT .
38. Connect the powertrain control module (PCM) connectors (A) and engine wire
harness connectors (B).
Fig. 52: Identifying Powertrain Control Module (PCM) Connectors
39. Install the harness clamps (C).
40. Install the PCM (A), then install the PCM cover (B).
2008 Honda Civic GX
2006-08 ENGINE Engine Assembly - Civic GX
Fig. 53: Identifying PCM Cover (With Torque Specifications)
41. Install the battery cables (A) to the under-hood fuse/relay box.
Fig. 54: Identifying Battery Cables
42. Install the harness clamps (B).
43. Install the vacuum hose (A), the brake booster vacuum hose (B), and the power
steering (P/S) hose clamp (C).
Fig. 55: Identifying Vacuum Hose And Brake Booster Vacuum Hose (With
Torque Specifications)
2008 Honda Civic GX
2006-08 ENGINE Engine Assembly - Civic GX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст