Honda Civic. Manual — part 645
Fig. 12: Identifying Rear Fender Cover Screws
2. Install the fender cover in the reverse order of removal.
REAR STRAKE REPLACEMENT
FOR SOME MODELS
Remove the bolts, then remove the rear strake (A) from the body.
1. Remove the clips (A) and bolts (B), then remove the rear floor undercover (C).
Take care not to scratch the rear bumper (D).
2008 Honda Civic EX
2006-08 ACCESSORIES AND EQUIPMENT Fenderwell - Civic (All Except Hybrid)
Fig. 13: Identifying Rear Floor Undercover Clips (With Torque
Specifications)
2. Install the strike in the reverse order of removal,
REAR AIR OUTLET REPLACEMENT
1. Remove the rear bumper (see REAR BUMPER
REMOVAL/INSTALLATION ).
2. Detach the hooks (A), then remove the rear air outlet (B). Take care not to
scratch the body.
Fig. 14: Removing Rear Air Outlet
3. Install the air outlet by pushing on the hook portions until the hooks snap into
place.
2008 Honda Civic EX
2006-08 ACCESSORIES AND EQUIPMENT Fenderwell - Civic (All Except Hybrid)
2006-08 ACCESSORIES AND EQUIPMENT
Frame - Civic (Except Hybrid)
UPPER DASHBOARD SUPPORT GUSSET REPLACEMENT
UPPER DASHBOARD SUPPORT GUSSET TORQUE
NOTE:
Refer to the FUEL FILL DOOR (GX) (SUPPLEMENT) article
for additional information for the GX model.
NOTE:
Take care not to scratch the body.
2008 Honda Civic EX
2006-08 ACCESSORIES AND EQUIPMENT Frame - Civic (Except Hybrid)
2008 Honda Civic EX
2006-08 ACCESSORIES AND EQUIPMENT Frame - Civic (Except Hybrid)
Fig. 1: Identifying Upper Dashboard Support Gusset Components (With
Torque Specifications)
REAR FLOOR UPPER CROSS-MEMBER GUSSET REPLACEMENT
REAR FLOOR UPPER CROSS-MEMBER GUSSET TORQUE
NOTE:
Take care not to scratch the body.
2008 Honda Civic EX
2006-08 ACCESSORIES AND EQUIPMENT Frame - Civic (Except Hybrid)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст