Honda Civic. Manual — part 2
Fig. 3: Connecting HDS To DLC
2. Turn the ignition switch ON (II).
3. Make sure the HDS communicates with the vehicle and the ABS modulator-
control unit. If it doesn't, troubleshoot the DLC circuit: Except Si model (see
DLC CIRCUIT TROUBLESHOOTING ), Si model (see DLC CIRCUIT
TROUBLESHOOTING ).
4. Check the diagnostic trouble code (DTC) and note it. Also check the on board
snapshot data, and download any data found. Then refer to the indicated DTC's
troubleshooting, and begin the appropriate troubleshooting procedure.
HOW TO RETRIEVE DTCS
1. With the ignition switch to LOCK (0), connect the HDS to the data link
connector (DLC) under the driver's side of the dashboard.
2. Turn the ignition switch ON (II).
3. Make sure the HDS communicates with the vehicle and the ABS modulator-
control unit. If it doesn't, troubleshoot the DLC circuit: Except Si model (see
DLC CIRCUIT TROUBLESHOOTING ), Si model (see DLC CIRCUIT
NOTE:
The HDS communication will be stopped when the
vehicle speed is at 31 mph (50 km/h) or more.
The HDS can read the DTC, current data, and other
system data.
For specific operations, refer to the Help menu that
came with the HDS.
2008 Honda Civic GX
2006-08 BRAKES ABS System - Civic (All Except Hybrid)
TROUBLESHOOTING ).
4. Follow the prompts on the HDS to display the DTC(s) on the screen. After
determining the DTC, refer to the DTC TROUBLESHOOTING.
5. Turn the ignition switch to LOCK (0).
HOW TO CLEAR DTCS
1. With the ignition switch to LOCK (0), connect the HDS to the data link
connector (DLC) under the driver's side of the dashboard.
2. Turn the ignition switch ON (II).
3. Make sure the HDS communicates with the vehicle and the ABS modulator-
control unit. If it doesn't, troubleshoot the DLC circuit: Except Si model (see
DLC CIRCUIT TROUBLESHOOTING ), Si model (see DLC CIRCUIT
TROUBLESHOOTING ).
4. Clear the DTC(s) by following the screen prompts on the HDS.
5. Turn the ignition switch to LOCK (0).
DTC TROUBLESHOOTING INDEX
DTC TROUBLESHOOTING INDEX
DTC
Detection Item ABS Indicator
Brake System
Indicator
11
-13
Right-front wheel
sensor circuit
malfunction
ON
ON/OFF
(1)
12
-11
Right-front wheel
sensor electrical
noise or
intermittent
interruption
ON
ON/OFF
(1)
-12
Right-front wheel
sensor short to
the other sensor
circuit
ON
ON/OFF
(1)
-21
Right-front wheel
ON
2008 Honda Civic GX
2006-08 BRAKES ABS System - Civic (All Except Hybrid)
sensor
installation error
ON/OFF
(1)
-22
Right-front wheel
sensor
installation error
(19 mph (30
km/h) or more)
ON
ON/OFF
(1)
-23
Right-front wheel
sensor
installation error
(0 to 9 mph (0 to
15 km/h))
ON
ON/OFF
(1)
13
-13
Left-front wheel
sensor circuit
malfunction
ON
ON/OFF
(1)
14
-11
Left-front wheel
sensor electrical
noise or
intermittent
interruption
ON
ON/OFF
(1)
-12
Left-front wheel
sensor short to
the other sensor
circuit
ON
ON/OFF
(1)
-21
Left-front wheel
sensor
installation error
ON
ON/OFF
(1)
-22
Left-front wheel
sensor
installation error
(19 mph (30
km/h) or more)
ON
ON/OFF
(1)
-23
Left-front wheel
sensor
ON
ON/OFF
(1)
2008 Honda Civic GX
2006-08 BRAKES ABS System - Civic (All Except Hybrid)
installation error
(0 to 9 mph (0 to
15 km/h))
15
-13
Right-rear wheel
sensor circuit
malfunction
ON
ON/OFF
(1)
16
-11
Right-rear wheel
sensor electrical
noise or
intermittent
interruption
ON
ON/OFF
(1)
-12
Right-rear wheel
sensor short to
the other sensor
circuit
ON
ON/OFF
(1)
-21
Right-rear wheel
sensor
installation error
ON
ON/OFF
(1)
-22
Right-rear wheel
sensor
installation error
(19 mph (30
km/h) or more)
ON
ON/OFF
(1)
-23
Right-rear wheel
sensor
installation error
(0 to 9 mph (0 to
15 km/h))
ON
ON/OFF
(1)
17
-13
Left-rear wheel
sensor circuit
malfunction
ON
ON/OFF
(1)
18
-11
Left-rear wheel
sensor electrical
noise or
ON
ON/OFF
(1)
2008 Honda Civic GX
2006-08 BRAKES ABS System - Civic (All Except Hybrid)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст