Honda Civic. Manual — part 444

Fig. 66: Identifying External Snap Ring - 6-Speed M/T Model (Si)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2. Press the intermediate shaft (A) out of the intermediate shaft bearing (B) using

a press. Be careful not to damage the bearing support ring (C) on the
intermediate shaft during disassembly.

Fig. 67: Pressing Intermediate Shaft Out Of Intermediate Shaft Bearing
Courtesy of AMERICAN HONDA MOTOR CO., INC.

3. Remove the internal snap ring.

2008 Honda Civic GX

2006-08 DRIVELINE/AXLES Driveline/Axle - Civic (All Except Hybrid)

Fig. 68: Identifying Internal Snap Ring
Courtesy of AMERICAN HONDA MOTOR CO., INC.

4. Press the intermediate shaft bearing (A) out of the bearing support (B) using

the half shaft base (C), oil seal driver (D) and a press.

Fig. 69: Pressing Intermediate Shaft Bearing Out Of Bearing Support
Courtesy of AMERICAN HONDA MOTOR CO., INC.

INTERMEDIATE SHAFT REASSEMBLY

5-SPEED M/T MODEL (EXCEPT SI)

2008 Honda Civic GX

2006-08 DRIVELINE/AXLES Driveline/Axle - Civic (All Except Hybrid)

Fig. 70: Exploded View Of Intermediate Shaft - 5-Speed M/T Model (Except
Si) With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Special Tools Required

Oil seal driver 07GAD-PH70201

Attachment, 52 x 55 mm 07746-0010400

Attachment, 35 mm I.D. 07746-0030400

Driver 07749-0010000

5-speed M/T model (except Si)

1. Clean the disassembled parts with solvent, and dry them with compressed air.

2. Press the intermediate shaft bearing (A) into the bearing support (B) using the

NOTE:

Refer to Fig. 70, as needed, during this procedure.

NOTE:

Do not wash the rubber parts with solvent.

2008 Honda Civic GX

2006-08 DRIVELINE/AXLES Driveline/Axle - Civic (All Except Hybrid)

52 x 55 mm attachment (C), driver (D), and a press.

Fig. 71: Pressing Intermediate Shaft Bearing
Courtesy of AMERICAN HONDA MOTOR CO., INC.

3. Seat the internal snap ring into the groove of the bearing support.

Fig. 72: Identifying Internal Snap Ring
Courtesy of AMERICAN HONDA MOTOR CO., INC.

4. Press the intermediate shaft (A) into the new shaft bearing (B) using the 35 mm

I.D. attachment (C) and a press.

2008 Honda Civic GX

2006-08 DRIVELINE/AXLES Driveline/Axle - Civic (All Except Hybrid)