Honda Civic. Manual — part 207
1. Warm up the engine to normal operating temperature (the radiator fan comes
on).
2. Make sure that the transmission is filled to the proper level, and check for fluid
leaks.
3. Drain the ATF (see step 3 ) through a strainer. Inspect the strainer for metal
debris or excessive clutch material.
Does the strainer have metal debris or excessive clutch material?
YES -Replace the transmission, then go to step 12.
NO -Replace the ATF (see step 5 ), then go to step 4.
4. Turn the ignition switch to ON (II).
5. Clear the DTC with the HDS.
6. Select Shift Solenoid Valve B in the Miscellaneous Test Menu, and check it
operates with the HDS.
Is a clicking sound heard?
YES -Go to step 7.
NO -Replace shift solenoid valve B (see SHIFT SOLENOID VALVE AND
SHIFT SOLENOID WIRE HARNESS REPLACEMENT ), then go to step
10.
7. Test-drive the vehicle with the shift lever in D, and let the transmission shift
through all five gears.
8. Turn the ignition switch to LOCK (0). Repeat the test-drive in step 7, then go
to step 9.
9. Monitor the OBD STATUS for P0756 or P0757 in the DTCs MENU with the
HDS.
board snapshot with the HDS, and review General
Troubleshooting Information (see GENERAL
TROUBLESHOOTING INFORMATION ).
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Does the HDS indicate FAILED?
YES -Repair shift valve B, or replace the transmission, then go to step 12.
NO -If the HDS indicates PASSED, intermittent failure, the system is OK at
this time. If the HDS indicates NOT COMPLETED, go to step 7.
10. Turn the ignition switch to ON (II).
11. Clear the DTC with the HDS.
12. Test-drive the vehicle with the shift lever in D, and let the transmission shift
through all five gears.
13. Turn the ignition switch to LOCK (0). Repeat the test-drive in step 12, then go
to step 14.
14. Check for DTCs with the HDS.
Is DTC P0756 or P0757 indicated?
YES -Go to step 5.
NO -Go to step 15.
15. Monitor the OBD STATUS for P0756 or P0757 in the DTCs MENU with the
HDS.
Does the HDS indicate PASSED?
YES -Troubleshooting is complete. If any other DTCs were indicated in step
14, go to the INDICATED DTC'S TROUBLESHOOTING.
NO -If the HDS indicates FAILED, go to step 5. If the HDS indicates NOT
COMPLETED, go to step 12.
DTC P0761: Shift Solenoid Valve C Stuck OFF; DTC P0762: Shift Solenoid Valve C Stuck ON
NOTE:
Before you troubleshoot, record all freeze data and any on-
board snapshot with the HDS, and review General
Troubleshooting Information (see GENERAL
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
1. Warm up the engine to normal operating temperature (the radiator fan comes
on).
2. Make sure that the transmission is filled to the proper level, and check for fluid
leaks.
3. Drain the ATF (see step 3 ) through a strainer. Inspect the strainer for metal
debris or excessive clutch material.
Does the strainer have metal debris or excessive clutch material?
YES -Replace the transmission, then go to step 12.
NO -Replace the ATF (see step 5 ), then go to step 4.
4. Turn the ignition switch to ON (II).
5. Clear the DTC with the HDS.
6. Select Shift Solenoid Valve C in the Miscellaneous Test Menu, and check it
operates with the HDS.
Is a clicking sound heard?
YES -Go to step 7.
NO -Replace shift solenoid valve C (see SHIFT SOLENOID VALVE AND
SHIFT SOLENOID WIRE HARNESS REPLACEMENT ), then go to step
10.
7. Test-drive the vehicle with the shift lever in D, and let the transmission shift
through all five gears.
8. Turn the ignition switch to LOCK (0). Repeat the test-drive in step 7, then go
to step 9.
9. Monitor the OBD STATUS for P0761 or P0762 in the DTCs MENU with the
HDS.
Does the HDS indicate FAILED?
TROUBLESHOOTING INFORMATION ).
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
YES -Repair shift valve C, or replace the transmission, then go to step 12.
NO -If the HDS indicates PASSED, intermittent failure, the system is OK at
this time. If the HDS indicates NOT COMPLETED, go to step 7.
10. Turn the ignition switch to ON (II).
11. Clear the DTC with the HDS.
12. Test-drive the vehicle with the shift lever in D, and let the transmission shift
through all five gears.
13. Turn the ignition switch to LOCK (0). Repeat the test-drive in step 12, then go
to step 14.
14. Check for DTCs with the HDS.
Is DTC P0761 or P0762 indicated?
YES -Go to step 5.
NO -Go to step 15.
15. Monitor the OBD STATUS for P0761 or P0762 in the DTCs MENU with the
HDS.
Does the HDS indicate PASSED?
YES -Troubleshooting is complete. If any other DTCs were indicated in step
14, go to the INDICATED DTC'S TROUBLESHOOTING.
NO -If the HDS indicates FAILED, go to step 5. If the HDS indicates NOT
COMPLETED, go to step 12.
DTC P0766: Shift Solenoid Valve D Stuck OFF
NOTE:
Before you troubleshoot, record all freeze data and any on-
board snapshot with the HDS, and review General
Troubleshooting Information (see GENERAL
TROUBLESHOOTING INFORMATION ).
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст