Honda Civic. Manual — part 374

12. Lift up the rear of the console (A), and remove it from the dashboard.

Fig. 10: Removing Rear Of Console

13. Install the console in the reverse order of removal, and note these items:

Make sure each connector is plugged in properly.

Check if the clips are damaged or stress-whitened, and if necessary,
replace them with new ones.

Push the clips and hooks into place securely.

When installing the center console panel, install the tabs (A) into the notch
(B) of the parking brake base frame (C).

Fig. 11: Installing Console

14. Si model: Install the shift knob (A).

1 By hand, thread the locknut (B) on to the shaft unit it bottoms out on the
shaft.

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Consoles - Civic (All Except Hybrid)

2 By hand, thread the shift knob on the shaft.

3 Rotate the shift knob to proper position.

4 Tighten the locknut securely.

Fig. 12: Installing Shift Knob (Si Model) (With Specifications)

CENTER CONSOLE DISASSEMBLY/REASSEMBLY

Special Tools Required

KTC trim tool set SOJATP2014 *

*Available through the American Honda Tool and Equipment Program; call 888-
424-6857

1. Remove the center console (see CENTER CONSOLE

REMOVAL/INSTALLATION ).

2. If equipped, remove the center console armrest (see CENTER CONSOLE

ARMREST REPLACEMENT ).

3. Using a T20 TORX bit, remove the screws, and disconnect the accessory

socket connector (A).

NOTE:

Use the appropriate tool from the KTC trim tool set to
avoid damage when prying components.

Take care not to scratch the center console, dashboard,
and related parts.

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Consoles - Civic (All Except Hybrid)

Fig. 13: Identifying Accessory Socket Connector

4. Release the hooks (A) and pins (B), then separate the left console side panel

(C), right console side panel (D), console beverage holder (E) and console box
(F). If equipped, detach the harness clips (G), then remove the console
subharness (H) from the hooks (I). 4-door is shown; 2-door is similar.

Fig. 14: Removing Console Subharness

5. Release the hooks (A, B), then separate the console upper box (C) and console

lower box (D).

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Consoles - Civic (All Except Hybrid)

Fig. 15: Separating Console Upper And Lower Box

6. Assemble the console in the reverse order of removal, and make sure the

console subharness connector is plugged in properly.

CENTER CONSOLE ARMREST REPLACEMENT

FOR SOME MODELS

1. Remove the center console (see CENTER CONSOLE

REMOVAL/INSTALLATION ).

2. Gently pull out the center console rear cover (A) to detach the clips.

NOTE:

Take care not to scratch the armrest, center console, and
related parts.

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Consoles - Civic (All Except Hybrid)