Honda Civic. Manual — part 1016
Replacement of the seat weight sensors
After a vehicle collision
1. Remove the front seat (see FRONT SEAT REMOVAL/INSTALLATION ).
2. Remove the front seat belt buckle (see FRONT SEAT BELT BUCKLE ).
3. Pull back the cap (A) to release the hooks (B), and remove the screws, then
remove the height adjuster handle (C).
Fig. 57: Removing Height Adjuster Handle
4. Remove the recline cover (A).
1 Remove the recline knob (B) and screw (C).
2 Gently pull out the cover, then detach the clip (D), and release the hooks
(E).
NOTE:
Use the appropriate tool from the KTC trim tool set to
avoid damage when prying components.
Take care not to tear the seams of damage the seat
covers.
Put on gloves to protect your hands.
2008 Honda Civic EX
2006-08 ACCESSORIES & EQUIPMENT Seats - Civic (Except Hybrid)
Fig. 58: Removing Recline Cover
5. Gently pull out the center cover (A), then detach the clip, and release the hooks
(B). Driver's seat is shown; passenger's seat is similar.
2008 Honda Civic EX
2006-08 ACCESSORIES & EQUIPMENT Seats - Civic (Except Hybrid)
Fig. 59: Releasing Hooks Pulling Center Cover
6. From under the seat cushion, detach the side airbag connector clip (A).
2008 Honda Civic EX
2006-08 ACCESSORIES & EQUIPMENT Seats - Civic (Except Hybrid)
Fig. 60: Detaching Side Airbag Connector Clip
7. Release slits in the seat cushion cover (B) from the seat cushion frame spring
(C), then pull the cover back. Release the hooks (D) and remove the wire ties
(E).
8. Pull the side airbag harness (A) out through the loop (B).
2008 Honda Civic EX
2006-08 ACCESSORIES & EQUIPMENT Seats - Civic (Except Hybrid)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст