Honda Accord (2022 year). Manual in english — page 33
uu
Parking Your Vehicle
u
Cross Traffic Monitor
*
526
Driving
The system activates when:
•
The power mode is in ON.
•
The Cross Traffic Monitor is turned on.
2
Cross Traffic Monitor On and Off
•
The transmission is in
(
R
.
•
Your vehicle is moving at 3 mph (5 km/h) or
lower.
When a vehicle is detected approaching from a rear corner, Cross Traffic Monitor
alerts you with a buzzer and a displayed warning.
The system will not detect a vehicle that approaches from directly behind your
vehicle, nor will it provide alerts about a detected vehicle when it moves directly
behind your vehicle.
The system does not provide alerts for a vehicle that is moving away from your
vehicle, and it may alert for pedestrians, bicycles, or stationary objects.
■
How the System Works
1
Cross Traffic Monitor may not detect or may delay
alerting an approaching vehicle, or may alert without
an approaching vehicle under the following
conditions:
•
An obstacle, such as another vehicle and a wall,
near your vehicle’s rear bumper, is blocking the
radar sensor’s scope.
•
Your vehicle is moving at the speed of about 3 mph
(5 km/h) or higher.
•
A vehicle is approaching at the speed other than
between about 6 mph (10 km/h) and 16 mph (25
km/h).
•
The system picks up external interference such as
other radar sensors from another vehicle or strong
radio wave transmitted from a facility nearby.
•
Either corner of the rear bumper is covered with
snow, ice, mud or dirt.
•
When there is bad weather.
•
Your vehicle is on an incline.
•
Your vehicle is tilted due to a heavy load in the rear.
•
Your vehicle is reversing towards a wall, a pole, a
vehicle, and so on.
The rear bumper or the sensors have been improperly
repaired or the rear bumper has been deformed.
Have your vehicle checked by a dealer.
For proper operation, always keep the rear bumper
corner area clean.
Do not cover the rear bumper corner area with labels
or stickers of any kind.
Radar sensors:
Underneath the rear bumper
corners
* Not available on all models
Continued
527
uu
Parking Your Vehicle
u
Cross Traffic Monitor
*
Driving
An arrow icon appears on the side a vehicle is approaching on the audio/information
screen.
■
When the System Detects a Vehicle
1
When the System Detects a Vehicle
If the
on the lower right changes to
in amber
when the transmission is in
(
R
, mud, snow or ice,
etc. may have accumulated in the vicinity of the
sensor. The system is temporarily canceled. Check the
bumper corners for any obstructions, and thoroughly
clean the area if necessary.
If the
comes on when the transmission is in
(
R
,
there may be a problem with the Cross Traffic
Monitor system. Do not use the system and have your
vehicle checked by a dealer.
If the display remains the same with the transmission
in
(
R
, there may be a problem with the rear camera
system and the Cross Traffic Monitor system.
Do not use the system and have your vehicle checked
by a dealer.
Wide View
Normal View
Arrow Icon
Top Down View
528
uu
Parking Your Vehicle
u
Cross Traffic Monitor
*
Driving
You can switch the system on and off using the audio/information screen.
2
P. 351
The system can also be turned on and off on
the audio/information screen by pressing the
Cross Traffic Monitor icon.
■
Cross Traffic Monitor On and Off
Cross Traffic Monitor icon
529
Continued
Driving
Multi-View Rear Camera
About Your Multi-View Rear Camera
The audio/information screen can display your vehicle’s rear view. The display
automatically changes to the rear view when the transmission is put into
(
R
.
■
Multi-View Rear Camera Display Area
1
About Your Multi-View Rear Camera
The rear camera view is restricted. You cannot see
the corner ends of the bumper or what is underneath
the bumper. Its unique lens also makes objects
appear closer or farther than they actually are.
Visually confirm that it is safe to drive before backing
up. Certain conditions (such as weather, lighting, and
high temperatures) may also restrict the rear view. Do
not rely on the rearview display which does not give
you all information about conditions at the back of
your vehicle.
If the camera lens is covered with dirt or moisture,
use a soft, moist cloth to keep the lens clean and free
of debris.
You can change the
Fixed Guideline
and
Dynamic
Guideline
settings.
2
P. 351
Fixed Guideline
ON:
Guidelines appear when you put the
transmission into
(
R
.
OFF:
Guidelines do not appear.
Dynamic Guideline
ON:
Guidelines move according to the steering wheel
direction.
OFF:
Guidelines do not move.
Top Down View Mode
Normal View Mode
Wide View Mode
Guidelines
Bumper
Camera
Approx. 39 inches (1 m)
Approx. 20 inches (50 cm)
530
uu
Multi-View Rear Camera
u
About Your Multi-View Rear Camera
Driving
You can view three different camera modes on the audio/information screen.
Touch the appropriate icon to switch the mode.
: Wide view mode
: Normal view mode
: Top down view mode
•
If you were last using Wide view mode or Normal view mode, the same view
mode will be activated the next time you put the transmission into
(
R
.
•
If you were using Top down view mode before turning off the engine, the next
time you set the power mode to ON and put the transmission into
(
R
, the view
mode you were using just before using Top down view mode (Wide view mode
or Normal view mode) will be activated.
•
If you were using Top down view mode and 10 seconds elapsed after you took
the transmission out of
(
R
, the view mode you were using just before selecting
Top down view mode (Wide view mode or Normal view mode) will be activated
the next time you put the transmission into
(
R
.
531
Driving
Refueling
Fuel Information
■
Fuel recommendation
Use of a lower octane gasoline can cause a persistent, heavy metallic knocking noise
that can lead to engine damage.
■
Top tier detergent gasoline
Because the level of detergency and additives in gasoline vary in the market, Honda
endorses the use of “TOP TIER Detergent Gasoline” where available to help
maintain the performance and reliability of your vehicle. TOP TIER Detergent
Gasoline meets a new gasoline standard jointly established by leading automotive
manufacturers to meet the needs of today’s advanced engines.
Qualifying gasoline retailers will, in most cases, identify their gasoline as having met
“TOP TIER Detergent Gasoline” standards at the retail location. This fuel is
guaranteed to contain the proper level of detergent additives and be free of metallic
additives. The proper level of detergent additives, and absence of harmful metallic
additives in gasoline, help avoid buildup of deposits in your engine and emission
control system.
For further important fuel-related information for your vehicle, or on information on
gasoline that does not contain MMT, visit
In Canada, visit
for additional information on gasoline. For more information on top
tier gasoline, visit
■
Fuel tank capacity: 14.8 US gal (56 L)
Unleaded gasoline, pump octane number 87 or higher
1
NOTICE
We recommend quality gasoline containing
detergent additives that help prevent fuel system and
engine deposits. In addition, in order to maintain
good performance, fuel economy, and emissions
control, we strongly recommend the use of gasoline
that does NOT contain harmful manganese-based
fuel additives such as MMT, if such gasoline is
available.
Use of gasoline with these additives may adversely
affect performance, and cause the malfunction
indicator lamp on your instrument panel to come on.
If this happens, contact a dealer for service.
Some gasoline today is blended with oxygenates such
as ethanol. Your vehicle is designed to operate on
oxygenated gasoline containing up to 15% ethanol
by volume. Do not use gasoline containing methanol.
If you notice any undesirable operating symptoms, try
another service station or switch to another brand of
gasoline.
532
uu
Refueling
u
How to Refuel
Driving
How to Refuel
Your fuel tank is not equipped with a fuel filler cap. You can insert the filler nozzle
directly into the filler neck. The tank seals itself again when you pull out the filler
nozzle.
1.
Stop your vehicle with the service station
pump on the left side of the vehicle in the
rear.
2.
Turn off the engine.
3.
Unlock the driver’s door.
u
The fuel fill door on the outer side of the
vehicle will unlock.
4.
Press and release the area indicated by the
arrow to release the fuel fill door. You will
here a click and the lid will open slightly.
5.
Manually pull the fuel fill door to a fully
open position.
1
The fuel filler opening is designed to accept only
service station filler nozzles for refueling. Use of
smaller diameter tubes (e.g., those used to siphon
fuel for other uses) or other non-service station
devices can damage the area in and around the filler
opening.
Use the master door lock switch to unlock the fuel fill
door.
The vehicle doors and fuel fill door automatically
relock if the keyless remote unlock function is used.
This can be deactivated by briefly opening then
closing the driver’s door.
3
WARNING
Gasoline is highly flammable and explosive.
You can be burned or seriously injured
when handling fuel.
•
Stop the engine, and keep heat, sparks,
and flames away.
•
Handle fuel only outdoors.
•
Wipe up spills immediately.
Press
Fuel Fill Door
533
uu
Refueling
u
How to Refuel
Driving
6.
Place the end of the filler nozzle on the
lower part of filler opening, then insert it
slowly and fully.
u
Make sure that the end of the filler
nozzle goes down along with the filler
pipe.
u
Keep the filler nozzle level.
u
When the tank is full, the filler nozzle will
click off automatically.
u
If you do not fill up the tank to full,
always add a minimum of 1.3 US gal (5 L)
of fuel.
u
After filling, wait about five seconds
before removing the filler nozzle.
7.
Shut the fuel fill door by hand.
1
If the filler nozzle keeps turning off when the tank is
not full, there may be a problem with the pump’s fuel
vapor recovery system. Try filling at another pump. If
this does not fix the problem, consult a dealer.
The filler nozzle automatically stops to leave space in
the fuel tank so that fuel does not overflow as a result
of changes in air temperature.
Do not continue to add fuel after the filler nozzle has
automatically stopped. Additional fuel can exceed
the full tank capacity.
If you have to refuel your vehicle from a portable
container, use the funnel provided with your vehicle.
2
Refueling From a Portable Fuel Container
P. 630
If you repeatedly fill the tank with less than the
specified minimum amount of fuel, the malfunction
indicator lamp may come on. If this happens, have
your vehicle checked by a dealer.
1.5 L engine models
1.5 L engine models
All models
534
Driving
Fuel Economy and CO
2
Emissions
Improving Fuel Economy and Reducing CO
2
Emissions
Achieving fuel economy and reducing CO
2
emissions is dependent on several
factors, including driving conditions, load weight, idling time, driving habits, and
vehicle condition. Depending on these and other factors, you may not achieve the
rated fuel economy of this vehicle.
You can optimize your fuel economy with proper maintenance of your vehicle.
Always maintain your vehicle in accordance with the messages displayed on the
driver information interface.
•
Use engine oil with the viscosity recommended.
2
•
Maintain the specified tire pressure.
•
Do not load the vehicle with excess cargo.
•
Keep your vehicle clean. A buildup of snow or mud on your vehicle’s underside
adds weight and increases wind resistance.
■
Maintenance and Fuel Economy
1
Improving Fuel Economy and Reducing CO
Direct calculation is the recommended method to
determine actual fuel consumed while driving.
In Canada, posted fuel economy numbers are
established following a simulated test. For more
information on how this test is performed, please visit
consumption testing” in the search field at the top of
the page.
Miles driven
Gallons of
fuel
Miles per
Gallon
100
Liters of fuel
Kilometers
driven
L per 100 km
535
Driving
Turbo Engine Vehicle
Handling Precautions
The turbocharger is a high-precision device to obtain greater horsepower by
delivering a large volume of compressed air into the engine using a turbine driven by
the engine’s exhaust gas pressure.
•
When the engine is cold just after starting, avoid revving the engine or sudden
acceleration.
•
Always replace the engine oil and engine oil filter according to the Maintenance
Minder
TM
. The turbine rotates at very high speeds over 100,000 rpm and its
temperature reaches over 1,292°F (700°C). It is lubricated and cooled by engine
oil. If you fail to replace the engine oil and filter at the scheduled distance or
interval, deteriorated engine oil may cause failure such as sticking and abnormal
noise of the turbine bearing.
1
The scheduled maintenance intervals for replacing
the filter is indicated on the driver information
interface. Follow the information on replacement
timing.
2
The temperature gauge pointer is at the
mark
when you restart the engine after driving under high
load conditions such as at high speed or in hilly
terrain. This is normal. The gauge goes down after
you idle or drive the vehicle for about one minute.
H
537
Maintenance
This chapter discusses basic maintenance.
Service . . . . . . . . . . ... 540
Checking and Maintaining Wiper
Checking and Maintaining Tires
Replacing the Remote Battery . . .. 586
Climate Control System Maintenance
Interior Care . . . . . . . . . 588
Exterior Care. . . . . . . . . 590
538
Main
tenan
ce
Before Performing Maintenance
Inspection and Maintenance
For your safety, perform all listed inspections and maintenance to keep your vehicle
in good condition. If you become aware of any abnormality (noise, smell, insufficient
brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer.
(Note, however, that service at a dealer is not mandatory to keep your warranties in
effect.)
■
Routine inspections
Perform inspections before long distance trips, when washing the vehicle, or when
refueling.
2
Maintenance
P. 28
■
Periodic inspections
•
Check the brake fluid level monthly.
2
•
Check the tire pressure monthly. Examine the tread for wear and foreign objects.
2
Checking and Maintaining Tires
•
Check the operation of the exterior lights monthly.
2
•
Check the condition of the wiper blades at least every six months.
2
Checking and Maintaining Wiper Blades
P. 572
■
Types of Inspection and Maintenance
1
Maintenance, replacement, or repair of
emissions control devices and systems may be
done by any automotive repair establishment or
individuals using parts that are “certified” to
EPA standards.
According to state and federal regulations, failure to
perform maintenance on the maintenance main
items marked with # will not void your emissions
warranties. However, all maintenance services should
be performed in accordance with the intervals
indicated by the driver information interface.
2
If you want to perform complex maintenance tasks
that require more skills and tools, you can purchase a
subscription to the Service Express website at
2
If you want to perform maintenance yourself, make
sure that you have the necessary tools and skills first.
After performing maintenance, update the records in
the separate maintenance booklet.
U.S. models
539
uu
Before Performing Maintenance
u
Safety When Performing Maintenance
Main
tenan
ce
Safety When Performing Maintenance
Some of the most important safety precautions are given here.
However, we cannot warn you of every conceivable hazard that can arise in performing
maintenance. Only you can decide whether you should perform a given task.
•
To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames
away from the battery and all fuel related parts.
•
Never leave rags, towels, or other flammable objects under the hood.
u
Heat from the engine and exhaust can ignite them, causing a fire.
•
To clean parts, use a commercially available degreaser or parts cleaner, not
gasoline.
•
Wear eye protection and protective clothing when working with the battery or
compressed air.
•
Engine exhaust contains carbon monoxide, which is poisonous and can kill you.
u
Only operate the engine if there is sufficient ventilation.
•
The vehicle must be in a stationary condition.
u
Make sure your vehicle is parked on level ground, the parking brake is set, and
the engine is off.
•
Be aware that hot parts can burn you.
u
Make sure to let the engine and exhaust system cool thoroughly before
touching vehicle parts.
•
Be aware that moving parts can injure you.
u
Do not start the engine unless instructed, and keep your hands and limbs away
from moving parts.
u
Do not open the hood while the Auto Idle Stop function is activated.
■
Maintenance Safety
■
Vehicle Safety
1
Safety When Performing Maintenance
3
WARNING
Improperly maintaining this vehicle or
failing to correct a problem before driving
can cause a crash in which you can be
seriously hurt or killed.
Always follow the inspection and
maintenance recommendations according
to the schedules in this owner’s manual.
3
WARNING
Failure to properly follow maintenance
instructions and precautions can cause you
to be seriously hurt or killed.
Always follow the procedures and
precautions in this owner’s manual.
Models with Auto Idle Stop
540
uu
Before Performing Maintenance
u
Parts and Fluids Used in Maintenance Service
Main
tenan
ce
Parts and Fluids Used in Maintenance Service
The use of Honda genuine parts and fluids is recommended when maintaining and
servicing your vehicle. Honda genuine parts are manufactured according to the
same high quality standards used in Honda vehicles.
1
Parts and Fluids Used in Maintenance Service
Do not press the engine cover forcibly. This may
damage the engine cover and component parts.
2.0 L engine models
542
uu
Maintenance Minder
TM
u
To Use Maintenance Minder
TM
Main
tenan
ce
To Use Maintenance Minder
TM
Maintenance items, which should be serviced at the same time that you replace the
engine oil, appear on the driver information interface.
You can view them on the engine oil life screen at any time.
1.
Set the power mode to ON.
2.
Press the
(home) button.
3.
Roll the left selector wheel until
is displayed.
4.
Press the left selector wheel to go to the
Maintenance Minder
screen. The
engine oil life appears on the driver information interface along with maintenance
items due soon.
■
Displaying the Maintenance Minder Information
1
Displaying the Maintenance Minder Information
Based on the engine operating conditions, the
remaining engine oil life is calculated and displayed
as a percentage.
There is a list of maintenance main and sub items you
can view on the driver information interface.
2
Displayed Engine Oil
Life (%)
Calculated Engine Oil
Life (%)
100
100 to 91
90
90 to 81
80
80 to 71
70
70 to 61
60
60 to 51
50
50 to 41
40
40 to 31
30
30 to 21
20
20 to 16
15
15 to 11
10
10 to 6
5
5 to 1
0
0
(home) Button
Engine Oil Life
Main Item
Sub Item
Left Selector Wheel
543
uu
Maintenance Minder
TM
u
To Use Maintenance Minder
TM
Continued
Main
tenan
ce
■
Maintenance Minder Messages on the Driver Information
Interface
Maintenance Message
Oil Life Display
Explanation
Information
-
When you select the Maintenance
Minder screen, it displays codes for
maintenance items due at the next
engine oil change, along with the
percentage of engine oil life
remaining.
-
Maintenance Due Soon
15 %
The engine oil life indicator starts to
appear along with other due-soon
maintenance item codes when the
remaining oil life drops to 15
percent.
The engine oil is approaching the end
of its service life.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст