Honda Accord (2022 year). Manual in english — page 10
uu
Gauges and Displays
u
Driver Information Interface
156
In
strum
e
nt Pa
nel
■
The Driver Attention Monitor resets when:
•
The engine is turned off.
•
The driver unfastens the seat belt and opens the door while the vehicle is stopped.
■
For the Driver Attention Monitor to function:
•
The vehicle must be traveling above 25 mph (40 km/h).
•
The electric power steering (EPS) system indicator must be off.
■
Depending on driving conditions or other factors, the Driver Attention
Monitor may not function in the following circumstances:
•
The steering assist function of the Lane Keeping Assist System (LKAS) is active.
2
Lane Keeping Assist System (LKAS)
P. 486
•
The condition of the road is poor, e.g. the surface is unpaved or bumpy.
•
It is windy.
•
The driver is frequently operating the vehicle in an assertive manner such as
changing lanes or accelerating.
■
Customizing
You can change the Driver Attention Monitor settings. Select
Tactile And Audible
Alert
,
Tactile Alert
, or
OFF
.
2
P. 351
1
For the Driver Attention Monitor to function:
The bars on the driver information interface remain
grayed out unless the Driver Attention Monitor is
functioning.
Continued
157
uu
Gauges and Displays
u
Driver Information Interface
In
strum
e
nt Pa
nel
Shows the interval between your vehicle and
the vehicle detected ahead.
Informs you whether ACC with Low Speed
Follow and/or LKAS is activated or not. If ACC
with Low Speed Follow is activated, the set
following interval is displayed. If LKAS is
activated, the displayed lane marks change to
indicate that LKAS is activated.
2
Adaptive Cruise Control (ACC) with Low
Speed Follow
2
Lane Keeping Assist System (LKAS)
■
Driving Support Information
1
In case ACC with Low Speed Follow is not activated,
when the distance between your vehicle and the
vehicle ahead becomes too small, the section behind
the vehicle icon turns amber and alerts you.
Amber gradation
Icon of vehicle ahead
Distance of vehicle ahead
When ACC and LKAS is in On
Set Vehicle Interval
ACC on: The section behind the
vehicle icon turns green.
LKAS on: The lane outlines
appear on the display.
LKAS starts: The lane lines
change to solid ones.
LKAS suspend: The lane lines
change to dotted ones.
uu
Gauges and Displays
u
Driver Information Interface
158
In
strum
e
nt Pa
nel
Indicates the status of RDM, CMBS
TM
, Low Speed Braking Control
*
and the blind
spot information system
*
, such as On, Off, or Failure, by color and letters.
The following colors indicate the status of any of the above mentioned systems:
•
Green: The system is on.
•
Gray: The system is off.
•
Amber: There is a problem with the system.
■
Safety Support
1
If a system is indicated by the color amber, have your
vehicle checked by a dealer immediately.
To turn on or off each system, first rotate the left
selector wheel to switch displays. From the next
display you can select which system to turn on or off.
2
2
P. 459
2
Blind spot information System On and Off
P. 452
2
P. 467
You can also confirm the status of each function by
the color of the safety support indicator.
2
Safety Support Indicator (Amber)
P. 105
2
Safety Support Indicator (Green/Gray)
P. 108
Even when the Low Speed Braking Control icon is
green, if the parking sensor is turned off for the rear
only, the brake assist will not operate when reversing.
2
Models with Low Speed Braking Control
Area Info for CMBS
TM
CMBS
TM
Icon
and Status Info
Area Info for
blind spot
information
system
*
Blind spot
information
system Icon
and Status
Info
*
Low Speed
Braking Control
Icon and Status
Info
*
Area Info for Low Speed Braking Control
*
RDM Icon and
Status Info
Area Info
for RDM
* Not available on all models
159
uu
Gauges and Displays
u
Head-Up Display
*
Continued
In
strum
e
nt Pa
nel
Head-Up Display
*
Shows the current mode for ACC with Low Speed Follow and LKAS, tachometer,
traffic sign recognition system, shift position indicator,
M
(sequential mode*/7-
speed manual shift mode*) Indicator/Gear Selection Indicator, compass or turn-by-
turn directions along with the vehicle speed. You can choose which item to be
displayed using the
(HUD) button on the steering wheel. They are displayed
when the power mode is in ON.
To turn the head-up display on and off
: Press the
HUD
button on the driver side
control panel.
The display can be moved up and down to become level with your eyes.
To raise or lower the head-up display
: Press the
or
button until the
desired position is reached.
1
When you unlock and open the driver’s door with a
remote transmitter or keyless access system, the
head-up display adjusts automatically to one of the
two preset positions.
3
4
/
Button
3 4
HUD
Button
Head-Up Display
Press the
button to raise
the display.
3
Press the
button to lower
the display.
4
* Not available on all models
160
uu
Gauges and Displays
u
Head-Up Display
*
In
strum
e
nt Pa
nel
The display also shows the following
warnings.
•
Lane Departure Warning:
When your
vehicle is too close to the traffic lane lines,
the lane departure warning appears.
2
Lane Keeping Assist System (LKAS)
P. 486
•
Head-up Warning Lights:
Flash when the
BRAKE
message appears
on the driver information interface.
2
Collision Mitigation Braking System
P. 456
2
Adaptive Cruise Control (ACC) with
Low Speed Follow
2
Lane Departure Warning
* Not available on all models
161
uu
Gauges and Displays
u
Head-Up Display
*
Continued
In
strum
e
nt Pa
nel
Each time you press the
(HUD) button on the steering wheel, the head-up
display content will change.
■
To Change Head-Up Display Content
Head-Up Display
Current Mode for ACC with
Low Speed Follow and the
LKAS, Vehicle Speed, Traffic
Sign Recognition System
Vehicle Speed, Traffic
Sign Recognition
System
Tachometer, Shift Position Indicator,
M
(sequential mode
*
/7-speed manual
shift mode
*
) Indicator/Gear Selection
Indicator, Vehicle Speed, Traffic Sign
Recognition System
Traffic Sign
Recognition System,
Vehicle Speed
Turn-by-Turn
Directions, Vehicle
Speed, Traffic Sign
Recognition System
Compass, Vehicle
Speed, Traffic Sign
Recognition System
(HUD)
Button
* Not available on all models
uu
Gauges and Displays
u
Head-Up Display
*
162
In
strum
e
nt Pa
nel
Shows your driving speed in mph or km/h.
Shows the number of engine revolutions as a bar graph.
Shows the current shift position.
2
Shows the current mode for the sequential mode
*
/7-speed manual shift mode
*
.
Shows the current mode for ACC with Low Speed Follow and LKAS.
2
Adaptive Cruise Control (ACC) with Low Speed Follow
P. 470
2
Lane Keeping Assist System (LKAS)
P. 486
■
Vehicle Speed
■
Tachometer
■
Shift Position Indicator
■
M (sequential mode
*
/7-speed manual shift mode
*
)
Indicator/Gear Selection Indicator
■
Current Mode for ACC with Low Speed Follow and LKAS
1
Switch between mph and km/h by using the driver
information interface or customized features on the
audio/information screen.
2
P. 151
2
P. 351
* Not available on all models
163
uu
Gauges and Displays
u
Head-Up Display
*
In
strum
e
nt Pa
nel
■
Compass
Shows the compass screen.
■
Turn-by-Turn Directions
When driving guidance is provided by the navigation system, Android Auto or Apple
CarPlay, turn-by-turn directions to your destination appear.
2
Refer to the Navigation System Manual
2
P. 320
2
P. 313
Shows the traffic sign recognition system.
2
Traffic Sign Recognition System
P. 498
■
Navigation
■
Traffic Sign Recognition System
1
You can select whether the turn-by-turn display
comes on during the route guidance.
2
P. 351
Turn-by-turn directions may not be available for all
apps.
165
Controls
This chapter explains how to operate the various controls necessary for driving.
. . . . . . . . . . . . .. 166
Locking and Unlocking the Doors
Outside . . . . . . . . . . .. 170
Locking/Unlocking the Doors from the
Inside . . . . . . . . . . . . 177
Childproof Door Locks . . . . . . 179
Auto Door Locking/Unlocking . . .. 180
Immobilizer System . . . . . . .. 184
Security System Alarm. . . . . .. 185
Operating the Switches Around the
Button . . . . . . . . . . ... 204
Adjusting the Steering Wheel . . .. 209
Interior Rearview Mirror . . . . ... 210
Power Door Mirrors . . . . . . . 211
. . . . . . . . . . . . .. 212
Using Automatic Climate Control . 240
Automatic Climate Control Sensors... 243
Canadian models
* Not available on all models
166
Co
ntrols
Clock
Adjusting the Clock
You can adjust the time manually in the audio/information screen, with the power
mode in ON.
1.
Press the
, then select
Settings
.
2.
Select
System
.
3.
Select
Day & Time
.
4.
Select
Set Date & Time
.
5.
Select
Automatic Date & Time
, then
select
OFF
.
To adjust time:
6.
Select
Set Time
.
7.
Selecting /
.
8.
Select
Save
to set the time.
To adjust date:
6.
Select
Set Date
.
7.
Selecting /
.
8.
Select
Save
to set the date.
■
Adjusting the Time
1
The clock is automatically updated through the
navigation system, so the time does not need to be
adjusted.
You can also adjust the clock by touching the clock
displayed on the upper right corner of the display or
the
Clock
icon on the home screen.
1. Touch the clock on the display.
The clock screen of the select face-type appears.
2. Select
Settings
.
3. Select
Day & Time
.
4. Select
Set Date & Time
.
5. Select
Automatic Date & Time
, then select
OFF
.
6. Select
Set Date
or
Set Time
.
7. Adjusting the dates, hours, and minutes by
selecting /
.
8. Select
Save
to set the time.
You can customize the clock display to show the 12
hour clock or 24 hour clock.
2
P. 351
You can customize the date display to MM/DD/YYYY,
DD/MM/YYYY or YYYY/MM/DD.
2
P. 351
Models with navigation system
3 4
3 4
3 4
167
Continued
Co
ntrols
Locking and Unlocking the Doors
Key
This vehicle comes with the following keys:
Use the key to start and stop the engine, lock and unlock all the doors and the fuel
fill door, and open the trunk.
1
All the keys have an immobilizer system. The
immobilizer system helps to protect against vehicle
theft.
2
P. 184
Follow the advice below to prevent damage to the
keys:
•
Do not leave the keys in direct sunlight, or in
locations with high temperature or high humidity.
•
Do not drop the keys or set heavy objects on them.
•
Keep the keys away from liquids, dust and sand.
•
Do not take the keys apart except for replacing the
battery.
If the circuits in the keys are damaged, the engine
may not start, and the remote transmitter may not
work.
If the keys do not work properly, have them
inspected by a dealer.
You can remotely start the engine using the keyless
remote.
2
Models with remote engine starter
Models without keyless access system
Models with keyless access system
* Not available on all models
uu
Locking and Unlocking the Doors
u
Key
168
Co
ntrols
The built-in key can be used to lock/unlock the
doors or open the trunk when the keyless
remote battery becomes weak and the power
door lock/unlock operation is disabled.
To remove the built-in key, slide the release
knob and then pull out the key. To reinstall
the built-in key, push the built-in key into the
keyless remote until it clicks.
Contains a number that you will need if you
purchase a replacement key.
■
Built-in Key
Built-in Key
Release Knob
■
Key Number Tag
1
Keep the key number tag separate from the key in a
safe place outside of your vehicle.
If you wish to purchase an additional key, contact a
dealer.
If you lose your key and you cannot start the engine,
contact a dealer.
169
uu
Locking and Unlocking the Doors
u
Low Keyless Remote Signal Strength
Co
ntrols
Low Keyless Remote Signal Strength
The vehicle transmits radio waves to locate the keyless remote to start the engine,
lock and unlock
*
all the doors and the fuel fill door, and open
*
the trunk.
In the following cases, starting the engine, locking/unlocking
*
the doors/fuel fill
door, or opening
*
the trunk may be inhibited or operation may be unstable:
•
Strong radio waves are being transmitted by nearby equipment.
•
You are carrying the keyless remote together with telecommunications
equipment, laptop computers, cell phones, or wireless devices.
•
A metallic object is touching or covering the keyless remote.
1
Low Keyless Remote Signal Strength
Communication between the keyless remote and the
vehicle consumes the keyless remote’s battery.
Battery life is about two years, but this varies
depending on regularity of use.
The battery is consumed whenever the keyless
remote is receiving strong radio waves. Avoid placing
it near electrical appliances such as televisions and
personal computers.
* Not available on all models
170
uu
Locking and Unlocking the Doors
u
Locking/Unlocking the Doors from the Outside
Co
ntrols
Locking/Unlocking the Doors from the Outside
When you carry the keyless remote, you can
lock/unlock the doors and fuel fill door, and
open the trunk.
You can lock/unlock the doors, fuel fill door
within a radius of about 32 inches (80 cm) of
the outside door handle. You can open the
trunk within about 32 inches (80 cm) radius
from the trunk release button.
■
Locking the doors
Touch the door lock sensor on the front door.
u
Some exterior lights flash; the beeper
sounds; all the doors and fuel fill door
lock; and the security system sets.
■
Using the Keyless Access System
*
1
Locking/Unlocking the Doors from the Outside
If the interior light switch is in the door activated
position, the interior light comes on when you unlock
the doors.
No doors opened: The light fades out after 30
seconds.
Doors relocked: The light goes off immediately.
2
P. 223
Door Lock Sensor
1
Using the Keyless Access System
If you do not open a door within 30 seconds of
unlocking the vehicle with the keyless access system,
the doors and trunk will automatically relock.
You can lock or unlock doors using the keyless access
system only when the power mode is in VEHICLE OFF.
•
Do not leave the keyless remote in the vehicle
when you get out. Carry it with you.
•
Even if you are not carrying the keyless remote, you
can lock/unlock the doors while someone else with
the keyless remote is within range.
•
The door may be unlocked if the door handle is
covered with water in heavy rain or in a car wash if
the keyless remote is within range.
•
If you grip a front door handle or touch a door lock
sensor wearing gloves, the door sensor may be
slow to respond or may not respond by unlocking
or locking the doors.
* Not available on all models
Continued
171
uu
Locking and Unlocking the Doors
u
Locking/Unlocking the Doors from the Outside
Co
ntrols
■
Unlocking the doors and trunk
Grab the driver’s door handle:
u
The driver’s door and fuel fill door
unlocks.
u
Some exterior lights flash twice and the
beeper sounds twice.
Grab the front passenger’s door handle:
u
All the doors and fuel fill door unlock.
u
Some exterior lights flash twice and the
beeper sounds twice.
Press the trunk release button:
u
The trunk unlocks and opens.
u
A beeper will sound.
2
Using the Trunk Release Button
Trunk Release Button
1
Using the Keyless Access System
•
After locking the door, you have up to 2 seconds
during which you can pull the door handle to
confirm whether the door is locked. If you need to
unlock the door immediately after locking it, wait
at least 2 seconds before gripping the handle,
otherwise the door will not unlock.
•
The door might not open if you pull it immediately
after gripping the door handle. Grip the handle
again and confirm that the door is unlocked before
pulling the handle.
•
Even within the 32 inches (80 cm) radius, you may
not be able to lock/unlock the doors with the
keyless remote if it is above or below the outside
handle.
•
The keyless remote may not operate if it is too close
to the door and door glass.
The light flash, beep and door unlock mode settings
can be customized using the audio/information
screen.
2
P. 351
* Not available on all models
uu
Locking and Unlocking the Doors
u
Locking/Unlocking the Doors from the Outside
172
Co
ntrols
■
Locking the doors (Walk away auto
lock
®
)
When you walk away from the vehicle with all
doors closed while carrying the keyless
remote, the doors will automatically lock.
The auto lock function activates when all
doors are closed, and the keyless remote is
within about 5 feet (1.5 m) radius of the
outside door handle.
Exit vehicle while carrying keyless remote and
close door(s).
1.
While within about 5 feet (1.5 m) radius of
the vehicle.
u
The beeper sounds; the auto lock
function will be activated.
2.
Carry the keyless remote beyond about 5
feet (1.5 m) from the vehicle and remain
outside this range for 2 or more seconds.
u
Some exterior lights flash; the beeper
sounds; all doors will then lock.
1
Locking the doors (Walk away auto lock
The auto lock function is set to OFF as the factory
default setting. The auto lock function can be set to
ON using the audio/information screen.
If you set the auto lock function to ON using the
audio/information screen, only the keyless remote
that was used to unlock the driver’s door prior to the
setting change can activate auto lock.
2
P. 351
After the auto lock function has been activated,
when you stay within the locking/unlocking
operation range, the indicator on the keyless remote
will continue to flash until the doors are locked.
When you stay beside the vehicle within the
operation range, the doors will automatically lock
approximately 30 seconds after the auto lock
function activating beeper sounds.
When you open a door after the auto lock function
activating beeper sounds, the auto lock function will
be canceled.
Under the following circumstances, the auto lock
function will not activate:
•
The keyless remote is inside the vehicle.
u
The beeper will not sound.
•
The keyless remote is taken out of its operational
range before all the doors are closed.
u
The beeper will sound.
The activation range of
the auto lock function is
about 5 feet (1.5 m)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст