Honda Accord (2022 year). Manual in english — page 6
92
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Seat Belt
Reminder
Indicator
•
Blinks and the beeper sounds for a
few seconds if you are not wearing
a seat belt when you set the power
mode to ON, then the indicator
comes on.
•
If the front passenger is not
wearing a seat belt, the indicator
comes on a few seconds later.
•
Comes on for a while when the rear
seat belt is unfastened while the
power mode in ON.
•
Blinks while driving if you and/or
any passenger has not fastened a
seat belt. The beeper sounds and
the indicator blinks at regular
intervals.
•
The beeper stops and the indicator goes off
when you and the passengers fasten their
seat belts.
•
Stays on after you and/or the
passengers have fastened the seat
belt(s)
- A detection error may have
occurred in the sensor. Have your vehicle
checked by a dealer.
2
P. 39
93
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Low Fuel
Indicator
•
Comes on when the fuel reserve is
running low (approximately
2.2 U.S. gal./8.4 L left).
•
Blinks if there is a problem with the
fuel gauge.
•
Comes on
- Refuel your vehicle as soon as
possible.
•
Blinks
- Have your vehicle checked by a
dealer.
Anti-lock
Brake System
(ABS)
Indicator
•
Comes on if there is a problem with
the ABS.
•
Stays on constantly
- Have your vehicle
checked by a dealer. With this indicator on,
your vehicle still has normal braking ability
but no anti-lock function.
2
Supplemental
Restraint
System
Indicator
•
Comes on if a problem with any of
the following is detected:
-
Supplemental restraint system
-
Knee airbag system
-
Side airbag system
-
Side curtain airbag system
-
Seat belt tensioner
•
Stays on constantly
- Have your vehicle
checked by a dealer.
94
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Auto High-
Beam
Indicator
•
Comes on when all the operating
conditions of the auto high-beam
are met.
2
P. 199
—
Vehicle
Stability
Assist
TM
(VSA
®
)
System
Indicator
●
Blinks when VSA
®
is active.
●
Comes on if there is a problem with
the brake assist system, VSA
®
system or hill start assist system.
●
Stays on constantly
- Have your vehicle
checked by a dealer.
2
Electronic Stability Control (ESC),
System
●
Comes on if the VSA
®
system is
deactivated temporarily after the
battery has been disconnected, then
re-connected.
●
Drive a short distance at more than 12 mph
(20 km/h). The indicator should go off. If it
does not, have your vehicle checked by a
dealer.
95
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Vehicle
Stability
Assist
TM
(VSA
®
)
OFF
Indicator
●
Comes on when you partially
disable VSA
®
.
2
●
Comes on if the VSA
®
system is
deactivated temporarily after the
battery has been disconnected, then
re-connected.
●
Drive a short distance at more than 12 mph
(20 km/h). The indicator should go off. If it
does not, have your vehicle checked by a
dealer.
Electric Power
Steering (EPS)
System
Indicator
•
Comes on if there is a problem with
the EPS system.
•
Stays on constantly
- Have your vehicle
checked by a dealer.
2
If the Electric Power Steering (EPS)
System Indicator Comes On
P. 617
96
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Low Tire
Pressure/
TPMS
Indicator
●
May come on briefly if the power
mode is set to ON and the vehicle is
not moved within 45 seconds, to
indicate the calibration process is
not yet complete.
●
Comes on and stays on when:
-
One or more tires’ pressures are
determined to be significantly low.
-
The system has not been
calibrated.
●
Comes on while driving
- Stop in a safe
place, check tire pressures, and inflate the
tire(s) if necessary.
●
Stays on after the tires are inflated to
the recommended pressures
- The
system needs to be calibrated.
2
P. 446
●
Blinks for about one minute, and
then stays on if there is a problem
with the TPMS, or when a compact
spare tire is temporarily installed.
●
Blinks and remains on
- Have your vehicle
checked by a dealer. If the vehicle is fitted
with a compact spare tire, get your regular
tire repaired or replaced and put back on
your vehicle as soon as you can.
●
Comes on if the TPMS is deactivated
temporarily after the battery has
been disconnected, then re-
connected.
●
Drive a short distance at more than 12 mph
(20 km/h). The indicator should go off. If it
does not, have your vehicle checked by a
dealer.
97
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Turn Signal
and Hazard
Warning
Indicators
•
Blinks when you operate the turn
signal lever.
•
Blink along with all turn signals
when you press the hazard warning
button.
•
Does not blink or blinks rapidly
2
P. 566, 567
—
High Beam
Indicator
•
Comes on when the high beam
headlights are on.
—
—
Lights On
Indicator
•
Comes on when the parking, tail,
and other external lights are on.
2
—
Fog Light
Indicator
*
•
Comes on when the fog lights are
on.
2
—
* Not available on all models
98
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Canadian models only: Apply and hold the brake pedal before selecting the ON mode.
*2:Canadian models
Indicator
Name
On/Blinking
Explanation
Message
Immobilizer
System
Indicator
•
Blinks if the immobilizer system
cannot recognize the key
information.
•
Blinks
- You cannot start the engine. Set
the power mode to VEHICLE OFF
*1
, then
select the ON mode again.
•
Repeatedly blinks
- The system may be
malfunctioning. Have your vehicle checked
by a dealer.
•
Do not attempt to alter this system or add
other devices to it. Electrical problems can
occur.
Indicator
*2
*2
99
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Security
System Alarm
Indicator
•
Blinks when the security system
alarm has been set.
2
P. 185
—
System
Message
Indicator
•
Comes on along with a beep when
a problem is detected. A system
message on the driver information
interface appears at the same time.
•
While the indicator is on, press the
(home) button to see the message again.
2
Accessing contents in the main display
P. 140
•
Refer to the Indicators information in this
chapter when a system message appears on
the driver information interface. Respond to
the message accordingly.
•
The driver information interface does not
return to the normal screen unless the
warning is canceled, or the left selector
wheel is pressed.
—
Indicator
100
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Models without the adaptive damper system
*2:Models with the adaptive damper system
Indicator
Name
On/Blinking
Explanation
Message
ECON Mode
Indicator
•
Comes on when the ECON mode is
on.
2
*1
*2
101
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
*1:Models without the adaptive damper system
*2:Models with the adaptive damper system
Indicator
Name
On/Blinking
Explanation
Message
SPORT
Mode
Indicator
*
•
Comes on when you press the
SPORT
button.
●
The ambient meter remains lit up in red as
long as SPORT mode is on.
2
P. 433
*1
*2
* Not available on all models
102
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Auto Idle
Stop Indicator
(Green)
*
●
Comes on when Auto Idle Stop is in
operation. The engine automatically
shuts off.
2
P. 435
—
Auto Idle
Stop System
Indicator
(Amber)
*
●
Comes on when the Auto Idle Stop
system has been turned off by the
Auto Idle Stop
OFF
button.
2
P. 436
●
Blinks if there is a problem with the
Auto Idle Stop system.
●
Blinks
- Have your vehicle checked by a
dealer.
* Not available on all models
103
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Adaptive
Cruise
Control
(ACC) with
Low Speed
Follow
Indicator
(Amber)
●
Comes on if there is a problem with
ACC with Low Speed Follow.
●
Comes on while driving
- Have your
vehicle checked by a dealer.
●
Comes on if the ACC with Low
Speed Follow is deactivated
temporarily after the battery has
been disconnected, then re-
connected.
●
Drive a short distance at more than 12 mph
(20 km/h). The indicator should go off. If it
does not, have your vehicle checked by a
dealer.
●
Indicator may come on temporarily
when the Maximum Load Limit is
exceeded.
●
ACC with Low Speed Follow has
been automatically canceled.
●
Make sure the total load is within the
Maximum Load Limit.
2
P. 405
●
Stays on constantly
- Have your vehicle
checked by a dealer.
—
104
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Adaptive
Cruise
Control
(ACC) with
Low Speed
Follow
Indicator
(White/
Green)
●
Lights up in white when you press
the
button.
●
Lights up in green when you press
the
RES/+
button or
SET/-
button.
2
Adaptive Cruise Control (ACC) with
Low Speed Follow
P. 470
—
Lane Keeping
Assist System
(LKAS)
Indicator
(Amber)
●
Comes on if there is a problem with
the LKAS.
●
Stays on constantly
- Have your vehicle
checked by a dealer.
Lane Keeping
Assist System
(LKAS)
Indicator
(White/
Green)
●
Lights up in white when you press
the LKAS button.
●
Lights up in green when the LKAS is
in operation.
2
Lane Keeping Assist System (LKAS)
P. 486
—
Cruise Mode
Indicator
(White/
Green)
●
Lights up in white when you change
to cruise mode.
●
Lights up in green when you have
set a speed for cruise control.
2
To Switch ACC with Low Speed Follow
to Cruise Control
P. 484
—
105
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Safety
Support
Indicator
(Amber)
●
Comes on if there is a problem with
RDM, Low Speed Braking Control
*
,
CMBS
TM
, or the blind spot
information system
*
.
●
Stays on constantly
- Have your vehicle
checked by a dealer.
●
Comes on if the RDM, Low Speed
Braking Control
*
and CMBS
TM
are
deactivated temporarily after the
battery has been disconnected and
then re-connected.
●
Drive a short distance at more than 12 mph
(20 km/h). The indicator should go off. If it
does not, have your vehicle checked by a
dealer.
* Not available on all models
106
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Safety
Support
Indicator
(Amber)
●
Comes on when RDM, Low Speed
Braking Control
*
and/or CMBS
TM
shuts itself off.
●
Indicator may come on temporarily when
passing through an enclosed space, such as
a tunnel.
●
The area around the radar sensor cover is
blocked by dirt, mud, etc. Stop your vehicle
in a safe place and wipe the debris off with
a soft cloth.
Indicator may take some time to go off after
the radar sensor cover is cleaned.
●
Have your vehicle checked by a dealer if the
indicator does not go off even after you
have cleaned the radar sensor cover.
2
Collision Mitigation Braking System
P. 456
2
●
Stays on
- The temperature inside the
camera is too high.
Use the climate control system to cool down
the camera.
The system activates when the temperature
inside the camera cools down.
2
P. 504
* Not available on all models
107
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Safety
Support
Indicator
(Amber)
●
Comes on when RDM, Low Speed
Braking Control
*
and/or CMBS
TM
shuts itself off.
●
Stays on
- The area around the camera is
blocked by dirt, mud, etc. Stop your vehicle
in a safe place and wipe the debris off with
a soft cloth.
●
Have your vehicle checked by a dealer if the
indicator and message are still displayed
even after you have cleaned the area
around the camera.
2
●
Comes on when mud, snow, or ice
accumulates in the vicinity of sonar.
●
Remove the obstacle in the vicinity of sonar
sensor.
2
2
P. 507
●
Comes on when mud, snow, or ice
has accumulated in the vicinity of
the blind spot information system
sensor.
●
Comes on while driving
- Something may
be interfering with the blind spot
information system sensor. Check the
vicinity of the blind spot information system
sensor and remove any obstacles.
2
P. 450
●
Indicator may come on temporarily
when the Maximum Load Limit is
exceeded.
●
Make sure the total load is within the
Maximum Load Limit.
2
P. 405
—
Models with Low Speed
Braking Control
Models with blind spot
information system
* Not available on all models
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст