Honda HR-V (2019 year). Instruction — part 7
96
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Adaptive
Cruise Control
(ACC)
Indicator
(Amber)
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on if there is a problem
with ACC.
●
Comes on while driving - Have your
vehicle checked by a dealer.
Adaptive
Cruise Control
(ACC)
Indicator
(Green)
*
●
Comes on when you press the
MAIN button.
2 Adaptive Cruise Control (ACC) P. 467
—
Lane Keeping
Assist System
(LKAS)
Indicator
(Amber)
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on if there is a problem
with the LKAS.
●
Stays on constantly - Have your vehicle
checked by a dealer.
Lane Keeping
Assist System
(LKAS)
Indicator
(Green)
*
●
Comes on when you press the
MAIN button.
2 Lane Keeping Assist System (LKAS)
P. 480
—
* Not available on all models
97
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
Collision
Mitigation
Braking
System
TM
(CMBS
TM
)
Indicator
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
●
Comes on when you deactivate
the CMBS
TM
. A multi-information
display message appears for five
seconds.
●
Comes on if there is a problem
with the CMBS
TM
.
●
Stays on constantly without the
CMBS
TM
off - Have your vehicle checked
by a dealer.
2 Collision Mitigation Braking
●
Comes on when the CMBS
TM
system shuts itself off.
●
Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off
with a soft cloth.
●
When the radar sensor gets dirty, stop
your vehicle in a safe place, and wipe off
dirt using a soft cloth.
●
Have your vehicle checked by a dealer if
the message does not disappear even
after you clean the sensor cover.
2 Collision Mitigation Braking
●
Stays on - The temperature inside the
camera is too high. Use the climate control
system to cool down the camera. The
system activates when the temperature
inside the camera cools down.
* Not available on all models
98
uu
Indicators
u
Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Information Display Warning and Information Messages
*
The following messages appear only on the information display.
Message
Condition
Explanation
●
Appears when the fuel fill cap is loose or is not
installed.
2 Check/Tighten Fuel Cap Message P. 594
●
Appears when there is a problem with the sensor on
the battery.
●
Stays on constantly - Have your vehicle checked
by a dealer.
* Not available on all models
99
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
Continued
In
strum
e
nt Pa
nel
Multi-Information Display Warning and Information Messages
*
The following messages appear only on the multi-information display. Press the
(information) button to see the message again
with the system message indicator on.
Message
Condition
Explanation
●
Appears when the fuel fill cap is loose or is not
installed.
2 Check/Tighten Fuel Cap Message P. 594
●
Appears when the scheduled maintenance is due
soon.
u
Consequently, Maintenance Due Now and
Maintenance Past Due follow.
2 Maintenance Minder Messages on the Multi-
●
Appears when the washer fluid is low.
●
Refill the washer fluid.
2 Refilling Window Washer Fluid P. 534
●
Appears while you are customizing the settings and
the shift lever is moved out of
(
P.
Canadian models
* Not available on all models
100
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if the automatic brake hold is automatically
canceled while it is in operation.
• Immediately depress the brake pedal.
• Appears when the automatic brake hold system is
turned off.
• Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.
• Fasten the driver’s seat belt.
• Appears when the automatic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.
• Press the automatic brake hold button with the brake
pedal depressed.
101
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the parking brake is applied
automatically while it is in operation.
2 Automatic Brake Hold P. 500
2 Parking Brake P. 497
• Appears when the electric parking brake switch is
pressed without depressing the brake pedal while
the electric parking brake is in operation.
• Press the electric parking brake switch with the brake
pedal depressed.
2 Parking Brake P. 497
102
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the ignition key is turned to
ACCESSORY
(
q from ON
(
w. (The driver’s door is
closed.)
—
●
Appears when you open the driver’s door while the
ignition key is in ACCESSORY
(
q.
●
Turn the ignition switch to LOCK
(
0, then remove the
key.
●
Appears when you open the driver’s door while the
ignition key is in LOCK
(
0.
●
Remove the key from the ignition switch.
Models without smart entry system
103
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears after you unlock and open the driver’s door.
●
Appears when the steering wheel is locked.
●
Move the steering wheel left and right while pressing
the ENGINE START/STOP button.
●
Appears if you push the ENGINE START/STOP
button to turn the engine off without the shift lever
in
(
P.
●
Move the shift lever to
(
P. The power mode changes
to VEHICLE OFF.
●
Appears when the power mode is in ACCESSORY.
—
Models with smart entry system
Canadian models
104
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
●
Press the ENGINE START/STOP button twice with
your foot off the brake pedal, to change the power
mode to VEHICLE OFF (LOCK).
●
Appears when you close the door with the power
mode in ON without the smart entry remote inside
the vehicle.
●
Goes off when you bring the smart entry remote back
inside the vehicle and close the door.
2 Smart Entry Remote Reminder P. 166
●
Appears when the smart entry remote battery
becomes weak.
●
Replace the battery as soon as possible.
2 Replacing the Button Battery P. 562
●
Appears if the smart entry remote battery is too
weak to start the engine or the key is not within
operating range to start the engine. A beeper
sounds six times.
●
Bring the smart entry remote in front of the ENGINE
START/STOP button to be touched with.
2 If the Smart Entry Remote Battery is Weak P. 586
Models with smart entry system
105
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when there is a problem with the sensor on
the battery.
●
Appears when the battery is not charging.
●
Have your vehicle checked by a dealer.
2 Checking the Battery P. 560
●
Appears along with the battery charging system
indicator - Turn off the climate control system and rear
defogger to reduce electricity consumption.
2 If the Charging System Indicator Comes On P. 593
●
Appears when the starter system has a problem.
●
As a temporary measure, press and hold the ENGINE
START/STOP button for up to 15 seconds while
pressing the brake pedal, and manually start the
engine.
Have your vehicle checked by a dealer.
U.S. models
Canadian models
106
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears for about three seconds when ACC has
been automatically canceled.
●
You can resume the set speed after the condition that
caused ACC to cancel improves. Press the RES/+
button.
2 Adaptive Cruise Control (ACC) P. 467
●
Flashes when the system senses a likely collision with
a vehicle in front of you.
●
Take appropriate action to prevent a collision (apply the
brakes, change lanes, etc.).
2 Adaptive Cruise Control (ACC) P. 467
2 Collision Mitigation Braking System
P. 457
●
Appears when the LKAS is in operation, or the LKAS
button is pressed, but there is a problem with a
system related to the LKAS. The LKAS cancels
automatically. The beeper sounds simultaneously.
●
If any other system indicators come on, such as the
VSA®, ABS and brake system, take appropriate action.
●
Appears when the camera has been cooled down
and LKAS is available.
●
Pressing the MAIN/LKAS button can resume the
system.
107
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if there is a problem with the auto high-
beam.
• Manually operate the headlight switch.
• If you are driving with the high beam headlights when
this happens, the headlights are changed to low
beams.
• Appears if anything covers the radar sensor cover
and prevents the sensor from detecting a vehicle in
front.
• May appear when driving in bad weather (rain,
snow, fog, etc.)
• When the radar sensor gets dirty, stop your vehicle in a
safe place, and wipe off dirt using a soft cloth.
• Have your vehicle checked by a dealer if the message
does not disappear even after you clean the sensor
cover.
2 Radar Sensor P. 496
2 Honda Sensing®
• Appears if the temperature inside the front sensor
camera is too high and some driver assist systems
cannot be activated.
• Use the climate control system to cool down the
camera.
• Disappears - The camera has been cooled down and
the systems are activated normally.
2 Front Sensor Camera P. 494
2 Honda Sensing®
• Appears if the area around the front sensor camera
is blocked by dirt, mud, etc. and be prevented from
detecting a vehicle in front.
• May appear when driving in bad weather (rain,
snow, fog, etc.)
• When the front window gets dirty, stop your vehicle in
a safe place, and wipe it off with a soft cloth.
• Have your vehicle checked by a dealer if the message
does not disappear even after you cleaned the area
around the camera.
2 Front Sensor Camera P. 494
2 Honda Sensing®
* Not available on all models
108
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the vehicle is driving out of a detected
line. The steering wheel vibrates rapidly.
●
Keep the vehicle within the lane you are driving.
2 Lane Keeping Assist System (LKAS) P. 480
●
Appears when the vehicle is driving out of a detected
line.
- The steering wheel vibrates rapidly when the
vehicle is drifting out of a detected line.
- The steering wheel vibrates rapidly when the
vehicle is drifting out of a detected line. The system
also steers the vehicle to help you remain within
your driving lane.
●
Keep the vehicle within the lane you are driving.
2 Road Departure Mitigation (RDM) System P. 489
●
You can change the setting for the road departure
mitigation system. Narrow, Normal, Wide, and
Warning Only can be selected.
●
Appears when the vehicle is likely to drive out of a
detected line.
- The system steers the vehicle to help you remain
within your driving lane.
—
●
Blinks when you fail to steer the vehicle. The beeper
sounds simultaneously.
●
Operate the steering wheel to resume the LKAS.
Lane Keeping Assist System (LKAS)
Road Departure Mitigation (RDM) System
When you selected Warning Only
When you selected Narrow, Normal or Wide
Road Departure Mitigation (RDM) System
When you selected Narrow
109
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears if the temperature inside the camera is too
high.
●
The LKAS has been automatically canceled.
●
Use the climate control system to cool down the
camera.
●
Goes off - The camera has been cooled down.
Pressing the LKAS button can resume the system.
2 Front Sensor Camera P. 494
2 Lane Keeping Assist System (LKAS) P. 480
●
Appears if not wearing a seat belt when you set the
power mode to ON.
●
Goes off after you or the front passenger or both of
you have fastened your seat belts.
●
Appears if there is a problem with the fuel gauge.
●
Blinks - Have your vehicle checked by a dealer.
●
Appears when the fuel reserve is running low
(approximately 1.98 U.S. gal./7.5 Liter left).
●
Appears - Refuel your vehicle as soon as possible.
2 Fuel Gauge P. 116
110
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears if any door is not completely closed.
●
The beeper sounds and the message appears on if
any door or the tailgate is opened while driving.
●
Goes off when all doors are closed.
●
Appears if the tailgate is not completely closed.
●
Goes off when the tailgate is closed.
●
Appears if any door or the tailgate is not completely
closed.
●
Goes off when all doors and the tailgate are closed.
111
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when ECON mode is turned off by pressing
ECON button.
2 ECON Button P. 440
●
Appears when approaching a intersection during
route guidance.
2 Refer to the Navigation System Manual
●
Appears when set the power mode to ON while
driving.
2 Emergency Engine Stop P. 587
• Appears if there is a problem with the automatic
lighting control system.
• Appears while driving - Manually turn the lights on,
and have your vehicle checked by a dealer.
• Appears if there is a problem with the headlights.
• Appears while driving - The headlights may not be
on. When conditions allow you to drive safety, have
your vehicle checked by a dealer as soon as possible.
Models with navigation system
Models with LED headlights
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст