Honda Ridgeline. Manual — part 486
*01
SJC8A00J54300065701MBAT00
Windshield
Wiper arms park position
Washer nozzle position
22-240
Wipers/Washers
Wiper Arm/Nozzle Adjustment
B
A
c
f
e
b
c
a
C
1. When the wiper arms stop at the park (automatic stop) position, confirm that they are at the standard position.
a:
Position at about 2.0 in. (52 mm) from the top of cowl cover (A)
b:
Position at about 1.7 in. (43 mm) from the top of cowl cover (A)
2. When you turn on the washers, confirm 50 % or more of the washer fluid lands within the spray area. If the spray
area is not within the standard positions, adjust the nozzles.
c:
Position at about 1.5 in. (37.5 mm) from the top of the black ceramic area (B) at the lower windshield
d:
Position at about 1.5 in. (37.5 mm) from the top of the black ceramic area (B) at the lower windshield
e:
Position at about 12.2 in. (311 mm) from the windshield center line (C)
f:
Position at about 12.2 in. (311 mm) from the windshield center line (C)
01
SJC8A00J54300065041KBAT00
22-241
Washer Tube Replacement
1. Remove the right inner fender (see page 20-178).
2. Remove the washer nozzles and clip, then remove the tubes.
*01
SJC8A00J22100000000DAAT00
22-242
Gauges
Component Location Index
SELECT/RESET SWITCH
FUEL GAUGE SENDING UNIT
GAUGE CONTROL MODULE
PARKING BRAKE SWITCH
BRAKE FLUID LEVEL SWITCH
Test, page 11-302
Test, page 8-5
Self-diagnostic Function, page 22-244
Replacement, page 22-263
Rewriting the ODO Data on a New
Gauge Control Module, page 22-263
Outside Air Temperature
Indicator Calibration, page 22-264
Test, page 19-11
Test, page 19-11
OIL PRESSURE SWITCH
Test/Replacement, page 22-266
02
03
22-243
CONNECTOR B
CONNECTOR A
CONNECTOR C
C1
C10
C20
C11
A1
A10
A20
A11
B1
B7
B14
B8
TACHOMETER
SPEEDOMETER
A/T GEAR POSITION
INDICATOR
COOLANT
TEMPERATURE
GAUGE
DOOR AND TAILGATE OPEN MONITOR
TIRE PRESSURE MONITOR
FUEL GAUGE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст