Honda Civic (2022 year). Manual in english — page 24
387
uu
HomeLink
®
Universal Transceiver
*
u
Training HomeLink
Continued
Features
Training HomeLink
If it is necessary to erase a previously entered
learned code:
•
Press and hold the I and III HomeLink
buttons for about 10 seconds, until the
green indicator blinks. Release the buttons,
and proceed to step 1.
•
If you are training the second or third
button, go directly to step 1.
The instructions on the next page should work for most gate or garage openers, but
may not work for all. For detailed instructions about your specific remote opener,
visit
or call (800) 355-3515.
Indicator
I HomeLink
Button
III HomeLink
Button
uu
HomeLink
®
Universal Transceiver
*
u
Training HomeLink
388
Features
■
Programming a Button
1
Reprogramming a Button
If you want to retrain a programmed button for a
new device, you do not have to erase all button
memory. You can replace the existing memory code
using this procedure:
2.
1.
Press and hold the desired HomeLink button until
the HomeLink indicator begins to
slowly flash
orange
. This should take about 20 seconds.
Release the HomeLink button and position the
remote transmitter you wish to link 1 - 3 inches
(3 - 8 cm) from the HomeLink button you want to
program, then follow steps 3 - 6 under
“programming a button.”
Erasing Button Memory
To erase programming from the buttons, press and hold
the two outside HomeLink buttons until the HomeLink
indicator changes from
orange to rapidly flashing green
.
This should take about 10 seconds. You should erase all
programming before selling the vehicle.
Operating
To operate, simply press and release the programmed
HomeLink button. Activation will now occur for the
trained device.
Questions
For questions or comments, visit
, or by calling the HomeLink Hotline
(North America only) at (800) 355-3515.
HomeLink
®
is a registered trademark of Gentex
Corporation.
Training
Complete
HomeLink LED is
continuously on green
.
YES
YES
1.
Position the remote transmitter you wish to link 1 to 3 inches (3 - 8 cm) from the
HomeLink
®
button you want to program.
3b.
Canadian Garage Door Opener
A. Press and release the HomeLink
button. Press, hold and release the
button on the remote every 2 secs.
Does the HomeLink indicator (LED)
change from
slowly flashing orange to
rapidly flashing or continuously on
green
? The process should take less
than 60 seconds.
NO
2.
Press and hold the desired HomeLink button. Is the HomeLink indicator (LED)
slowly
flashing orange
?
NO
3a.
Hold the button on the remote
transmitter. Does HomeLink indicator
(LED) change from
slowly flashing
orange to rapidly flashing green or
continuously on green
? The process
should take less than 60 seconds.
5.
Press and hold the HomeLink button again.
HomeLink indicator
rapidly flashes
green
.
5a.
The remote has a rolling code. Press the
“learn” button on the remote-controlled
device (e.g. garage door opener).
6.
Press and hold the HomeLink button
again.
The remote-controlled device should
operate.
Training Complete
5b.
Within 30 secs, press and hold the
programmed HomeLink button for 2
secs.
4.
Press and hold the programmed HomeLink
button for about a second. Does the device
(garage door opener) work?
389
Continued
Features
Bluetooth
®
HandsFreeLink
®
Bluetooth
®
HandsFreeLink
®
(HFL) allows you to place and receive phone calls using
your vehicle’s audio system, without handling your cell phone.
Using HFL
■
HFL Buttons
1
Place your phone where you can get good reception.
To use HFL, you need a
Bluetooth
-compatible cell
phone. For a list of compatible phones, pairing
procedures, and special feature capabilities:
•
automobiles.honda.com/handsfreelink/
or call 1-888-528-7876.
•
Canada: For more information on smartphone
compatibility, call 1-855-490-7351.
Voice control tips
•
Aim the vents away from the ceiling and close the
windows, as noise coming from them may interfere
with the microphone.
•
If the microphone picks up voices other than yours,
the command may be misinterpreted.
State or local laws may prohibit the operation of
handheld electronic devices while operating a vehicle.
Up to 20 favorite contacts can be stored. If there is no
entry in the system, the pop-up notification appears
on the screen.
2
Up to 20 call histories can be stored. If there is no call
history, Call History is disabled.
Models with color audio system
Selector Knob
Left Selector Wheel
PHONE
Button
VOL
(
+
/
VOL
(
-
(Volume) Switch
uu
Bluetooth
®
HandsFreeLink
®
u
Using HFL
390
Features
Left Selector Wheel:
While receiving a call, the incoming call screen is displayed on
the driver information interface. You can pick up the call using the left selector
wheel.
2
PHONE button:
Press to go directly to the
Phone
screen.
Selector knob:
Rotate
to select an item on the screen, then press
.
1
Bluetooth
®
Wireless Technology
The
Bluetooth
®
word mark and logos are registered
trademarks owned by
Bluetooth
SIG, Inc., and any
use of such marks by Honda Motor Co., Ltd., is under
license. Other trademarks and trade names are those
of their respective owners.
HFL Limitations
An incoming call on HFL will interrupt the audio
system when it is playing. It will resume when the call
is ended.
391
uu
Bluetooth
®
HandsFreeLink
®
u
Using HFL
Features
The audio/information screen notifies you when there is an incoming call.
Certain manual functions are disabled or inoperable while the vehicle is in motion.
You cannot select a grayed-out option until the vehicle is stopped.
■
HFL Status Display
1
The information that appears on the audio/
information screen varies between phone models.
■
Limitations for Manual Operation
HFL Mode
Battery Level Status
Signal Strength
Bluetooth
Indicator
Appears when your phone
is connected to HFL.
Roam Status
Call Name
Call Number
392
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
HFL Menus
To use the audio system function, the power mode must be in ACCESSORY or ON.
1
To use HFL, you must first pair your
Bluetooth
-
compatible cell phone to the system while the vehicle
is parked.
Some functions are limited while driving. A message
appears on the screen when the vehicle is moving
and the operation is canceled.
PHONE button
Recent Calls
*1
All
Pair a phone to the system.
Connect New Device
Change Device
Connects a paired phone.
Priority Device
Sets a device as the priority device.
Bluetooth Settings
Keypad
*1
Settings
Favorite
Contacts
*1
(Existing entry list)
Contacts
*1
Dialed
Missed
Received
Display the last outgoing, incoming and missed calls.
Display the last outgoing calls.
Display the last missed calls.
Display the last incoming calls.
Dial the selected number in the favorite contacts list.
Display the phonebook of the paired phone.
Enter a phone number to dial.
Disconnect All Device
Disconnect a paired phone from the system.
Delete Device
Delete a previously paired phone.
*1 : Available only when a phone is connected to HFL.
393
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Continued
Features
Ringtone
Select the ring tone stored in the connected cell phone.
Phone
Vehicle
Select the ring tone stored in HFL.
Auto Phone Call
Transfer
Hands-Free
System Clear
Set calls to automatically transfer from your phone to HFL when you
enter the vehicle.
Clear the phone settings, paired phones, all favorite contacts entries, all
call history data, and all imported phonebook data.
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
394
Features
■
To pair a cell phone (No phone has
been paired to the system)
1.
Press the
PHONE
button.
2.
Make sure your phone is in search or
discoverable mode.
3.
Select
Yes
.
u
The audio system will enter a waiting
mode for pairing.
4.
Select
Honda Civic
from your phone.
u
If you want to pair a phone from this
audio system, select
Search from car
and follow the prompts.
When your phone appears on the list,
select it.
5.
The system gives you a pairing code on the
audio/information screen.
u
Confirm if the pairing code on the screen
and your phone match.
This may vary by phone.
6.
A notification appears on the screen if
pairing is successful.
■
Phone Setup
1
Your
Bluetooth
-compatible phone must be paired to
HFL before you can make and receive hands-free
calls.
Phone Pairing Tips:
•
You cannot pair your phone while the vehicle is
moving.
•
Up to six phones can be paired.
•
Your phone’s battery may drain faster when it is
connected to HFL.
•
If your phone is not ready for pairing or not found
by the system within three minutes, the system will
time out and return to the
Bluetooth Settings
screen.
Once you have paired a phone, you can see it
displayed on the screen with one or two icons on the
right side.
These icons indicate the following:
: The phone is compatible with
Bluetooth
®
Audio.
: The phone can be used with HFL.
When pairing a phone from this audio system:
If your phone doesn’t appear on the audio/
information screen, select
Search from phone
and
search for
Bluetooth
®
devices using your phone.
From your phone, select
Honda Civic
.
395
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Continued
Features
■
To pair a cell phone (when a phone has
already been paired to the system)
1.
Press the
PHONE
button.
u
If a prompt appears asking to connect to
a phone, select
No
and proceed with
step 2.
2.
Select
Settings
.
3.
Select
Bluetooth Settings
.
4.
Select
Connect New Device
.
u
The audio system will enter a waiting
mode for pairing.
396
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
5.
Make sure your phone is in search or
discoverable mode.
6.
Select
Honda Civic
from your phone.
u
If you want to pair a phone from this
audio system, select
Search from car
and follow the prompts.
When your phone appears on the list,
select it.
7.
The system gives you a pairing code on the
audio/information screen.
u
Confirm if the pairing code on the screen
and your phone match.
This may vary by phone.
8.
A notification appears on the screen if
pairing is successful.
u
You can prioritize a
Bluetooth
®
device at
the same time. Select
Yes
if you want to
prioritize the device.
397
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Continued
Features
■
To change the currently paired phone
1.
Press the
PHONE
button.
2.
Select
Settings
.
3.
Select
Bluetooth Settings
.
4.
Select
Change Device
.
u
The screen changes to a device list.
5.
Select a desired device name.
6.
Select
Both
,
Audio
, or
Phone
.
u
When another device is connected to
Android Auto and you select
Both
or
Phone
, a confirmation message appears.
Select
Continue
.
u
HFL disconnects the connected phone
and starts searching for another paired
phone.
398
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
■
To delete a paired phone
1.
Press the
PHONE
button.
2.
Select
Settings
.
3.
Select
Bluetooth Settings
.
4.
Select
Delete Device
.
u
The screen changes to a device list.
5.
Select a phone you want to delete.
6.
A confirmation message appears on the
screen. Select
Yes
.
u
When the device is connected to Android
Auto, a confirmation message appears.
Select
Yes
.
Continued
399
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
If paring between your phone and the system is executed while you are on the
phone, the call can be automatically transferred to HFL.
1.
Press the
PHONE
button.
2.
Select
Settings
.
3.
Select
Auto Phone Call Transfer
.
4.
Select
ON
or
OFF
.
You can change the ring tone setting.
1.
Press the
PHONE
button.
2.
Select
Settings
.
3.
Select
Ringtone
.
4.
Select
Phone
or
Vehicle
.
■
Automatic Transferring
■
Ring Tone
1
Phone:
Depending on the make and model of the
cell phone, the ring tone stored in the phone will
sound if the phone is connected.
Vehicle:
The fixed ring tone sounds from the
speakers.
400
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
Phone settings, paired phones, all favorite contacts entries, all call history data, and
all imported phonebook data are erased.
1.
Press the
PHONE
button.
2.
Select
Settings
.
3.
Select
Hands-Free System Clear
.
4.
Select
Yes
.
5.
A confirmation message appears on the
screen. Select
Yes
.
6.
A notification appears on the screen. Select
OK
.
■
To Clear the System
Continued
401
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
When your phone is paired, the contents of its phonebook and call history are
automatically imported to HFL.
■
Automatic Import of Cellular Phonebook and Call History
1
Automatic Import of Cellular Phonebook and Call History
When you select a person from the list in the cellular
phonebook, you can see up to five category icons.
The icons indicate what types of numbers are stored
for that name.
On some phones, it may not be possible to import the
category icons to HFL.
The phonebook is updated after every connection.
Call history is updated after every connection or call.
Pref
Home
Mobile
Pager
Work
Fax
Car
Other
Voice
402
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
■
To add a favorite contacts
1.
Press the
PHONE
button.
2.
Select
Recent Calls
,
Contacts
, or
Keypad
.
3.
Select the star icon.
3.
Select
Add to Favorites
.
u
A notification appears on the screen if
the favorite contact is successfully stored.
u
To remove the favorite contact, select
the star icon again.
■
Favorite Contacts
Recent Calls Screen
Star Icon
Contacts Screen
Star Icon
Keypad Screen
Add to Favorites
On the Recent Calls or Contacts screen
On the Keypad screen
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст