Honda CR-V Hybrid (2022 year). Manual in english — page 8
124
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
●
Appears if the temperature inside the front sensor
camera is too high and some driver assist systems
cannot be activated.
●
Use the climate control system to cool down the
camera.
●
Disappears
- The camera has been cooled down
and the systems are activated normally.
2
2
P. 503
●
Appears if the area around the front sensor camera is
blocked by dirt, mud, etc. and be prevented from
detecting a vehicle in front.
●
May appear when driving in bad weather (rain, snow,
fog, etc.)
●
When the front window gets dirty, stop your vehicle
in a safe place, and wipe it off with a soft cloth.
●
Have your vehicle checked by a dealer if the message
does not disappear even after you cleaned the area
around the camera.
2
2
P. 503
●
Appears if there is a problem with the auto high-beam.
●
Manually operate the headlight switch.
●
If you are driving with the high beam headlights
when this happens, the headlights are changed to
low beams.
125
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
●
Appears if there is a problem with the real time AWD
with intelligent control system
TM
.
●
The engine drives the front wheels only in this state.
Have your vehicle checked by a dealer.
●
Appears when the differential temperature is too high.
●
Stop in a safe place, change to
(
P
, and idle the
engine until the message disappears. If the message
does not disappear, have your vehicle checked by a
dealer.
2
Real Time AWD with Intelligent Control
System
Message
Condition
Explanation
●
Appears when there is a problem with the power
tailgate system.
●
Manually open or close the power tailgate.
●
Have your vehicle checked by a dealer.
Message
Condition
Explanation
●
Appears while you are customizing the settings and the
shift position changed out of
(
P
.
2
P. 140
Models with power tailgate
Models with color audio system
126
In
strum
ent Pa
nel
Gauges and Driver Information Interface
Gauges
Gauges include the speedometer, fuel gauge, and other related indicators. They are
displayed when the power mode is in ON.
Displays your driving speed in mph or km/h.
Displays the amount of fuel left in the fuel tank.
■
Electric motor
The degree to which the electric motor is being powered is displayed by the readings
on the
POWER
side.
■
Battery charge in progress
The degree to which the High Voltage battery is being charged is displayed by the
readings on the
CHARGE
side.
■
Speedometer
■
Fuel Gauge
■
POWER/CHARGE Gauge
1
Press the
(display/information) button
repeatedly until the
icon is shown on the driver
information interface. Press
ENTER
, then press and
hold it again. The speedometer reading and the
displayed measurements will switch between mph
and km/h.
1
NOTICE
You should refuel when the reading approaches
.
Running out of fuel can cause the engine to misfire,
damaging the catalytic converter.
The actual amount of remaining fuel may differ from
the fuel gauge reading.
E
127
uu
Gauges and Driver Information Interface
u
Gauges
In
strum
ent Pa
nel
Shows the remaining High Voltage battery charge level.
■
High Voltage Battery Charge Level Gauge
1
High Voltage Battery Charge Level Gauge
The High Voltage battery charge level may decrease
under the following conditions:
•
When the 12-volt battery has been replaced.
•
When the 12-volt battery has been disconnected.
•
When the High Voltage battery control system
corrects its reading.
The charge level reading will be corrected
automatically while driving.
Changes in the temperature of the High Voltage
battery can increase or decrease the battery’s
charging capacity. If temperature changes cause the
battery’s capacity to change, the number of
indicators in the battery charge level gauge may also
change, even if the amount of charge remains the
same.
128
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
ent Pa
nel
Driver Information Interface
The driver information interface shows information such as the estimated travelable
distance and fuel economy of the vehicle. It also displays messages such as warnings
and other helpful information.
■
Main displays
Press the
(display/information) button, and then press
or
to change the
display. Press
ENTER
to see detailed information.
■
Switching the Display
(Display/
Information)
Button
Press
,
or .
Press
ENTER
.
Eco Drive
Display
Audio
*
Phone
*
Speed Unit &
Disp OFF
Warning
Messages
Average
Fuel
Economy
Records
Driver
Attention
Monitor
Range &
Fuel
Average
Speed &
Elapsed Time
Navigation
*
& Compass
*
Customize
*
Power Flow
Monitor
AWD Torque
Distribution
Monitor
Maintenance
Minder
TM
* Not available on all models
Continued
129
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
ent Pa
nel
■
Trip computer
Press the
(
TRIP
) knob to change display.
Shows the total number of miles or kilometers that your vehicle has accumulated.
Shows the total number of miles or kilometers driven since the last reset. Meters A
and B can be used to measure two separate trips.
■
Odometer
■
Trip Meter
Odometer
Outside temperature
Trip A
Trip B
(
TRIP
)
Knob
1
Switch between trip meter A and trip meter B by
pressing the
knob.
uu
Gauges and Driver Information Interface
u
Driver Information Interface
130
In
strum
ent Pa
nel
■
Resetting a trip meter
To reset a trip meter, display it, then press and hold the
knob. The trip meter is
reset to
0.0
.
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km.
The display is updated at set intervals. When a trip meter is reset, the average fuel
economy is also reset.
Shows the estimated distance you can travel on the remaining power and fuel. This
estimated distance is based on the vehicle’s current fuel economy.
Shows the time elapsed since Trip A or Trip B was reset.
Shows the average speed in mph or km/h since Trip A or Trip B was reset.
Shows the instant fuel economy as a bar graph in mpg or l/100 km.
■
Average Fuel Economy
■
Range
■
Elapsed Time
■
Average Speed
■
Instant Fuel Economy Gauge
1
You can change when to reset the average fuel
economy.
2
P. 140, 369
1
You can change when to reset the elapsed time.
2
P. 140, 369
1
You can change when to reset the average speed.
2
P. 140, 369
131
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
ent Pa
nel
Shows the remaining oil life and Maintenance Minder
TM
.
2
Shows the average fuel economy for the last
three driving cycles (1-3), and the current
driving cycle (0) in mpg or l/100 km.
Each time you set the power mode to ON, the
display is updated, and the oldest record is
deleted.
■
Maintenance Minder
TM
■
Average Fuel Economy Records
132
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
ent Pa
nel
■
Eco Drive Display
The vehicle icon on the display moves forward or backward while driving.
The more aggressive the acceleration is, the further the icon moves forward.
The more aggressive the deceleration is, the further the icon moves backward.
Keep the icon near the center of the circle for better fuel economy while driving.
■
Eco Drive Display/Drive Cycle Score/Lifetime Points
Aggressive
Deceleration
Vehicle Icon
Aggressive
Acceleration
Moderate
Deceleration
Slow
Acceleration/
Deceleration
Moderate
Acceleration
133
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
ent Pa
nel
■
Drive Cycle Score/Lifetime Points
Appear for a few seconds when you set the power mode to VEHICLE OFF. Each has
three stages. Depending on your driving style, the leaf icon(s) and the gauge
increase or decrease to indicate that you have reached a different stage of fuel
economy.
■
Resetting the Drive Cycle Score
1.
Make sure the shift position is in
(
P
. Turn the power mode to ON.
2.
If ECON mode is on, press the
ECON
button to turn it off.
3.
Turn the power mode to VEHICLE OFF.
4.
Turn the power mode to ON again.
u
Make sure to complete steps from 4 through 6 within 30 seconds.
5.
Depress the brake pedal twice.
6.
Press the
ECON
button twice.
u
The color of the ambient meter will turn to monochrome.
7.
Turn the power mode to VEHICLE OFF.
Drive Cycle
Score
Lifetime
Points
Advancing to
2nd Stage
Receding to
2nd Stage
Advancing to
3rd Stage
Receding to
3rd Stage
uu
Gauges and Driver Information Interface
u
Driver Information Interface
134
In
strum
ent Pa
nel
Displays the power flow of the motor and engine, indicating the vehicle’s power
source and whether the battery is being charged.
■
Power Flow Monitor
1
While the vehicle is stationary with the engine
running, the following may appear on the driver
information interface.
Power is supplied by
the motor and the
engine.
The motor is charging
the High Voltage
battery.
The engine is running
and the motor is
charging the High
Voltage battery.
Regeneration
Power is being
supplied by the engine
only.
Hybrid (HV)
Engine ON
Engine OFF
Power is supplied by
the motor.
Electric Vehicle (EV)
The engine is running
and the motor is charging
the High Voltage battery.
Engine (Direct Drive)
Power Flow
Engine
Continued
135
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
ent Pa
nel
The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is
being driven in a manner consistent with drowsy or inattentive driving. If it
determines that the vehicle is being driven in such a manner, it will display the
degree of the driver's attention on the driver information interface.
When the
(display/information) button
is pressed, bars in the Driver Information
Interface light up in white to indicate the
degree of the driver's attention.
2
P. 128
■
Driver Attention Monitor
1
The Driver Attention Monitor cannot always detect if
the driver is tired or inattentive.
Regardless of the system's feedback, if you are
feeling tired, stop in a safe location and rest for as
long as needed.
Driver Information Interface
ENTER
(Display/ Information) Button
Level
136
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
ent Pa
nel
If two bars light up, the
Driver Attention
Level Low
message will appear.
If one bar lights up, the
Driver Attention
Level Low. Time For A Break
message will
appear, a beep will sound, and the steering
wheel will vibrate.
If this message appears, stop in a safe location
and rest for as long as needed.
The message will disappear when the
ENTER
button is pressed or when the system has
determined that the driver is driving normally.
If the driver does not take a break and the
monitor continues to detect that the driver is
very tired, the message will appear again after
approximately 15 minutes, accompanied by a
beep and steering wheel vibrations.
The message does not appear when the
traveling time is 30 minutes or less.
Continued
137
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
ent Pa
nel
■
The Driver Attention Monitor resets when
•
the power system is turned off.
•
the driver unfastens the seat belt and opens the door while the vehicle is stopped.
■
For the Driver Attention Monitor to function
•
the vehicle must be traveling above 25 mph (40 km/h).
•
the electric power steering (EPS) system indicator must be off.
■
Depending on driving conditions or other factors, the Driver Attention
Monitor may not function in the following circumstances.
•
the steering assist function of the Lane Keeping Assist System (LKAS) is active.
2
Lane Keeping Assist System (LKAS)
•
the condition of the road is poor, e.g. the surface is unpaved or bumpy.
•
it is windy.
•
the driver is frequently operating the vehicle in an assertive manner such as
changing lanes or accelerating.
■
Customizing
You can change the Driver Attention Monitor settings. Select
Tactile And Audible
Alert
,
Tactile Alert
, or
OFF
.
2
P. 140, 369
1
For the Driver Attention Monitor to function
The bars in the Driver Information Interface remain
grayed out unless the Driver Attention Monitor is
functioning.
uu
Gauges and Driver Information Interface
u
Driver Information Interface
138
In
strum
ent Pa
nel
The indicators on the display show the
amount of torque being transferred to the
right front, left front, right rear, and left rear
wheels.
2
Real Time AWD with Intelligent Control
System
P. 492
Shows the outside temperature in Fahrenheit.
■
Adjusting the outside temperature display
Adjust the temperature reading by up to ±5°F if the temperature reading seems
incorrect.
■
AWD Torque Distribution Monitor
■
Outside Temperature
1
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
You can adjust the temperature reading.
2
P. 140, 369
Continued
139
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
ent Pa
nel
■
Compass
*
Shows the compass screen.
■
Turn-by-Turn Directions
When driving guidance is provided by the navigation system
*
or Android Auto, turn-
by-turn directions to your destination appear.
2
Refer to the Navigation System Manual
2
Show the current audio information.
2
Show the current phone information.
2
■
Navigation
*
■
Audio
*
■
Phone
*
1
You can select whether to have the turn-by-turn
display come on or not during the route guidance.
2
P. 369
* Not available on all models
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст