Honda CR-V Hybrid (2022 year). Manual in english — page 11
uu
Tailgate
u
Opening/Closing the Power Tailgate
*
172
Co
ntrols
Press the power tailgate button for more than
one second to operate when the power mode
is in VEHICLE OFF.
u
Some exterior lights flash and the beeper
sounds.
If you press the button again while the power
tailgate is moving, it will stop.
Press the button for more than one second,
and the power tailgate will reverse direction.
■
Customizing when to open the tailgate
Anytime:
The power tailgate unlocks and opens at the same time. This is the
default setting.
When Unlocked:
The tailgate opens when all doors are unlocked.
2
P. 369
■
Using the Remote Transmitter
1
Opening/Closing the Power Tailgate
If you replace the 12-volt battery or the power
tailgate fuse while the tailgate is open, the power
tailgate may be disabled. The power tailgate resumes
once you manually close the tailgate.
Installing aftermarket components other than Honda
genuine accessories on the power tailgate may
prevent it from fully opening or closing.
Make sure the power tailgate is fully open before you
get your cargo in and out.
The beeper sounds when you start driving while the
power tailgate is still open, or closing.
Power
Tailgate
Button
* Not available on all models
Continued
173
uu
Tailgate
u
Opening/Closing the Power Tailgate
*
Co
ntrols
To open or close the power tailgate, press the
power tailgate button for about one second.
u
Some exterior lights flash and the beeper
sounds.
If you press the button again while the power
tailgate is moving, it will stop.
Press the button for about one second, and
the power tailgate will reverse direction.
■
Using the Power Tailgate Button
1
Opening/Closing the Power Tailgate
If the power tailgate meets resistance while opening
or closing, the auto reverse feature reverses the
direction. The beeper sounds three times.
The auto reverse function stops sensing when the
tailgate is almost closed to make sure that it fully
closes.
Do not touch the sensors located on both sides of the
tailgate. The power tailgate does not close if you
touch either sensor when you are trying to close the
tailgate.
Be careful not to scratch the sensors with a sharp
object. If scratched, they can be damaged, and the
power tailgate closing feature malfunctions.
* Not available on all models
uu
Tailgate
u
Opening/Closing the Power Tailgate
*
174
Co
ntrols
If you press the outer handle of the tailgate for
no longer than one second, the tailgate opens
automatically.
u
The beeper sounds.
u
If you want to open the tailgate
manually, press the button for more than
one second.
2
P. 167
If you are carrying the keyless remote, you do
not have to unlock the tailgate before
opening it.
If you press the outer handle again while the
power tailgate is moving, it will stop.
Press the outer handle, and the power tailgate
will reverse direction.
■
Using the Tailgate Outer Handle
1
Using the Tailgate Outer Handle
•
Do not leave the keyless remote in the vehicle
when you get out. Carry it with you.
•
Even if you are not carrying the keyless remote, you
can lock/unlock the tailgate while someone else
with the keyless remote is within range.
•
Do not leave the keyless remote inside the cargo
area and close the tailgate. The beeper sounds and
the tailgate cannot be closed.
You can change the power tailgate operation setting
on and off.
2
P. 369
Outer Handle
175
uu
Tailgate
u
Opening/Closing the Power Tailgate
*
Continued
Co
ntrols
Press the tailgate inner button on the tailgate
to close the power tailgate.
u
The beeper sounds.
If you press the button again while the power
tailgate is moving, it will stop. Press and
release the button again, and the power
tailgate will reverse direction.
■
Using the Tailgate Inner Button
Tailgate Inner Button
uu
Tailgate
u
Opening/Closing the Power Tailgate
*
176
Co
ntrols
The extent to which the power tailgate
automatically opens can be programmed.
To program:
1.
Open the tailgate to the desired position.
2.
Press and hold the tailgate inner button.
You will hear one long beep, followed by
two short beeps.
■
Programming Tailgate Position
1
If the tailgate is only slightly opened, the position
cannot be programmed, even if you push the tailgate
inner button.
If you want to reprogram the power tailgate to open
all the way, manually raise the tailgate to its upper
most position and follow the directions step 2.
Tailgate Inner Button
177
uu
Tailgate
u
Opening/Closing the Power Tailgate
*
Co
ntrols
If you manually close the power tailgate, it latches automatically.
Automatically lowers the power tailgate when there is a possibility that the fully
opened power tailgate can fall down by its own weight (for example, by snow on
the tailgate). The beeper sounds while the power tailgate lowers.
■
Auto-Closer
■
Power Tailgate Fall Detection
1
The auto-closer feature does not activate if you press
the tailgate outer handle while the power tailgate is
closing.
NOTICE
Do not put any force on the tailgate while the power
tailgate is latching.
Keep your hands away from the tailgate when you
manually close the tailgate and let it latch
automatically. It is dangerous to put your hands
around the tailgate as it starts to latch itself.
1
If you try to manually close the power tailgate
immediately after it fully opens, the power tailgate
fall detection may activate.
Once the power tailgate fall detection activates, wait
until the power tailgate fully closes. Keep away from
the power tailgate when it is in motion.
If the power tailgate fall detection constantly
activates, consult a dealer.
178
Co
ntrols
Security System
Immobilizer System
This system prevents a key that has not been pre-registered from starting the power
system.
Pay attention to the following when pressing the
POWER
button:
•
Do not allow objects that emit strong radio waves near the
POWER
button.
•
Make sure the key is not covered by or touching a metal object.
•
Do not bring a key from another vehicle’s immobilizer system near the
POWER
button.
•
Do not put the key near magnetic items. Electronic device, such as televisions and
audio systems emit strong magnetic fields. Note that even a key chain can
become magnetic.
Security System Alarm
*
The security system alarm activates when the tailgate, hood or doors are forcibly
opened. The alarm does not activate if the tailgate or doors are opened with the key,
remote transmitter or keyless access system.
However, the alarm activates if a door is opened with the key and then the hood is
opened before the power mode is set to ON.
■
When the security system alarm activates
The horn sounds intermittently, and some exterior lights flash.
1
NOTICE
Leaving the key in the vehicle can result in theft or
accidental movement of the vehicle.
Always take the key with you whenever you leave the
vehicle unattended.
Do not alter the system or add other devices to it.
Doing so may damage the system and make your
vehicle inoperable.
1
The security system alarm continues for a maximum
of two minutes until the security system alarm
deactivates.
* Not available on all models
Continued
179
uu
Security System
u
Security System Alarm
*
Co
ntrols
■
To deactivate the security system alarm
Unlock the vehicle using the key, remote transmitter or keyless access system, or
turn the power mode is set to ON. The system, along with the horn and flashing
lights, is deactivated.
■
Setting the security system alarm
The security system alarm automatically sets when the following conditions have
been met:
•
The power mode is set to VEHICLE OFF.
•
The hood and tailgate are closed.
•
All doors and tailgate are locked from outside with the key, remote transmitter,
or keyless access system.
■
When the security system alarm sets
The security system alarm indicator in the instrument panel blinks and the blinking
interval changes after about 15 seconds.
■
To cancel the security system alarm
The security system alarm is canceled when the vehicle is unlocked using the remote
transmitter or keyless access system, or when the power mode is set to ON. The
security system alarm indicator goes off at the same time.
1
Do not set the security system alarm when someone
is in the vehicle or a window is open. The system can
accidentally activate when:
•
Unlocking the door with the lock tab.
•
Opening the hood with the hood release handle.
•
Opening the tailgate with the power tailgate
button on the dashboard.
If the 12-volt battery goes dead after you have set the
security system alarm, the security alarm may go off
once the 12-volt battery is recharged or replaced.
If this occurs, deactivate the security system alarm by
unlocking a door using the key, remote transmitter,
or keyless access system.
Do not alter the system or add other devices to it.
Doing so may damage the system and make your
vehicle inoperable.
Models with power tailgate
* Not available on all models
180
uu
Security System
u
Security System Alarm
*
Co
ntrols
■
The panic button on the remote
transmitter
If you press the panic button for
approximately one second, the following will
occur for about 30 seconds:
•
The horn sounds.
•
Some exterior lights flash.
■
Canceling panic mode
•
Press any button on the remote transmitter.
•
Set the power mode to ON.
■
Panic Mode
Panic
Button
181
Continued
Co
ntrols
Windows
Opening/Closing the Power Windows
The power windows can be opened and closed when the power mode is in ON,
using the switches on the doors. The driver’s side switches can be used to open and
close all the windows.
The power window lock button on the driver’s side must be switched off (not
pushed in, indicator off) to open and close the windows from anywhere other than
the driver’s seat.
When the power window lock button is switched on (pushed in, indicator on), you
can only operate the driver’s window. Turn the power window lock button on if a
child is in the vehicle.
1
Opening/Closing the Power Windows
The power windows can be operated for up to 10
minutes after you set the power mode to VEHICLE
OFF.
Opening either front door cancels this function.
3
WARNING
Closing a power window on someone’s
hands or fingers can cause serious injury.
Make sure your passengers are away from
the windows before closing them.
uu
Windows
u
Opening/Closing the Power Windows
182
Co
ntrols
■
Manual operation
To open:
Push the switch down lightly, and
hold it until the desired position is reached.
To close:
Pull the switch up lightly, and hold it
until the desired position is reached.
■
Automatic operation
To open:
Push the switch down firmly.
To close:
Pull the switch up firmly.
The window opens or closes completely. To
stop the window at any time, push or pull the
switch briefly.
■
Opening/Closing the Windows with Auto-Open/Close
Function
1
Opening/Closing the Power Windows
Auto Reverse
If a power window senses resistance when closing
automatically, it stops closing and reverse direction.
The driver’s window auto reverse function is disabled
when you continuously pull up the switch.
The auto reverse function stops sensing when the
window is almost closed to ensure that it fully closes.
While driving with any of the windows open, you
may hear a booming, throbbing, or helicopter-type
noise or pressure. This is called wind buffeting. This is
a normal occurrence that can be minimized.
If you hear a wind buffeting noise with any of the
windows open, lower all of the other windows
slightly or open the moonroof
*
.
ON
OFF
Power Window
Lock Button
Indicator
Auto-open/close function on driver’s
window
Auto-open/close function on front
windows
Driver’s
Window
Switch
OFF
Power Window
Lock Button
Indicator
Driver’s
Window
Switch
ON
Passenger’s
Window
Switch
* Not available on all models
Continued
183
uu
Windows
u
Opening/Closing the Power Windows
Co
ntrols
To open:
Push the switch down.
To close:
Pull the switch up.
Release the switch when the window reaches
the desired position.
To open:
Press the unlock button, and then
within 10 seconds, press it again and keep it
pressed. If the windows stop midway, repeat
the procedure.
■
Opening/Closing Windows without Auto-Open/Close Function
Close
Open
■
Opening the Windows with the Remote
1
Opening the Windows with the Remote
If you open the windows with the remote, the
moonroof will open automatically along with them.
Models with moonroof
Unlock
Button
uu
Windows
u
Opening/Closing the Power Windows
184
Co
ntrols
To open:
Unlock the driver’s door with the
key. Within 10 seconds of returning the key to
the central position, turn the key in the unlock
direction and hold it there.
To close:
Lock the driver’s door with the key.
Within 10 seconds of returning the key to the
central position, turn the key in the lock
direction and hold it there.
Release the key to stop the windows at the
desired position. If you want further
adjustment, repeat the same operation.
■
Opening/Closing the Windows with the Key
1
Opening/Closing the Windows with the Key
If you open/close the windows with the key ,the
moonroof will close automatically along with them.
Models with moonroof
Close
Open
185
Co
ntrols
Moonroof
*
Opening/Closing the Moonroof
You can operate the moonroof when the power mode is in ON. Use the switch in
the front of the ceiling to open and close the moonroof.
■
Automatic operation
To open:
Pull the switch back firmly.
To close:
Push the switch forward firmly.
The moonroof automatically opens or closes
all the way. To stop the moonroof midway,
pull or push the switch briefly.
■
Manual operation
To open:
Pull the switch back lightly, and
hold it until the desired position is reached.
To close:
Push the switch forward lightly, and
hold it until the desired position is reached.
■
Tilting the moonroof up
To tilt:
Push on the center of the moonroof
switch.
To close:
Push the switch forward firmly, then
release.
■
Using the Moonroof Switch
1
NOTICE
Opening the moonroof in below freezing
temperature or when it is covered with snow or ice
can damage the moonroof panel or motor.
The moonroof can be operated for up to 10 minutes
after you set the power mode to VEHICLE OFF.
Opening either front door cancels this function.
When resistance is detected, the auto reverse
function causes the moonroof to change directions,
then stop. Auto reverse stops sensing when the
moonroof is almost closed to ensure that it fully
closes.
You can use the remote transmitter or the key to
operate the moonroof.
2
Opening the Windows with the Remote
P. 183
2
Opening/Closing the Windows with the Key
P. 184
3
WARNING
Opening or closing the moonroof on
someone’s hands or fingers can cause
serious injury.
Make sure all hands and fingers are clear of
the moonroof before opening or closing it.
Open
Close
Tilt
* Not available on all models
186
Co
ntrols
Operating the Switches Around the Steering Wheel
POWER Button
■
Changing the Power Mode
1
POWER
Button Operating Range
You can start the power system when the keyless
remote is inside the vehicle.
The power system may also start if the keyless remote
is close to the door or window, even if it is outside the
vehicle.
ON mode:
The
POWER
button is on (in red), if the power system
is on.
If the battery of the keyless remote is getting low, the
power system may not start when you push the
POWER
button. If the power system does not start,
refer to the following link.
2
If the Keyless Remote Battery is Weak
P. 645
Do not leave the power mode in ACCESSORY or ON
when you get out.
Operating Range
VEHICLE OFF (LOCK)
The button is off.
The power to all electrical components is turned off.
ACCESSORY
The button blinks (in red).
Operate the audio system and other accessories
in this position.
ON
The button blinks (in red).
All electrical components can be used.
Without
pressing the
brake pedal
Press the button.
187
uu
Operating the Switches Around the Steering Wheel
u
POWER Button
Continued
Co
ntrols
If you leave the vehicle for 30 to 60 minutes with the transmission in
(
P
and the
power mode in ACCESSORY, the vehicle automatically goes into the mode similar to
VEHICLE OFF (LOCK) to avoid draining the 12-volt battery.
If you open the driver’s door when the power mode is set to ACCESSORY, a warning
buzzer sounds.
■
Automatic Power Off
■
Power Mode Reminder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст