Honda CR-V Hybrid (2022 year). Manual in english — page 25
397
uu
HomeLink
®
Universal Transceiver
*
u
Training HomeLink
Features
■
Training a Button
1
Retraining a Button
If you want to retrain a programmed button for a
new device, you do not have to erase all button
memory. You can replace the existing memory code
using this procedure:
1.
Press and hold the desired HomeLink button
until the HomeLink indicator begins to blink.
2.
Quickly release the HomeLink button and follow
steps 1 - 3 under “Training a Button.” You do not
need to press and release the HomeLink button
again in step 2.
Indicator remains on for about 25 secs.
Erasing Codes
To erase all the codes, press and hold the two outside
buttons until the HomeLink indicator begins to blink
(about 10 to 20 secs). You should erase all codes
before selling the vehicle.
If you have any problems, see the device’s
instructions, visit
www.homelink.com
, or call
HomeLink at (800) 355-3515.
HomeLink
®
is a registered trademark of Gentex
Corporation.
4.
3.
2.
5.
A.
B.
1.
Position the remote transmitter you wish to link 1 to 3 inches (3 - 8 cm) from the
HomeLink button you want to program.
Press and hold the desired HomeLink button. Hold the button on the remote
transmitter. Does the HomeLink indicator (LED) change from slowly blinking to
constantly on or rapidly blinking? The process should take less than 60 seconds.
Press and hold the
programmed HomeLink
button for about a sec.
Does the device (garage
door opener) work?
Press and release the HomeLink button. Press
and release the button on the remote every 2
secs.
Does the HomeLink indicator (LED) change from
slowly blinking to
constantly on or rapidly
blinking
? The process should take less than 60
seconds.
Training
Complete
Press and hold the HomeLink button again.
Press and hold the HomeLink
button again.
The remote-controlled device
should operate.
Training Complete
The remote has a rolling code. Press the
“learn” button on the remote-controlled
device (e.g. garage door opener).
Within 30 secs, press and hold the
programmed HomeLink button for 2 secs.
HomeLink indicator
rapidly blinks
.
HomeLink LED is
constantly
on.
YES
NO
YES
YES
NO
NO
398
Features
Bluetooth
®
HandsFreeLink
®
Bluetooth
®
HandsFreeLink
®
(HFL) allows you to place and receive phone calls using
your vehicle's audio system, without handling your cell phone.
Using HFL
(Pick-up) button:
Press to go directly to the phone screen or to answer an incoming call.
(Hang-up/back) button:
Press to end a call or to cancel a command.
(Talk) button:
Press to call a number with a stored voice tag.
(Phone) button:
Press to go directly to the phone screen.
Selector knob:
Rotate
to select an item on the screen, then press
.
■
HFL Buttons
1
Place your phone where you can get good reception.
To use HFL, you need a
Bluetooth
-compatible cell
phone. For a list of compatible phones, pairing
procedures, and special feature capabilities:
Visit
automobiles.honda.com/handsfreelink/
, or call
1-888-528 -7876.
Voice control tips
•
Aim the vents away from the ceiling and close the
windows, as noise coming from them may interfere
with the microphone.
•
Press and release the
button when you want to
call a number using a stored voice tag. Speak
clearly and naturally after a beep.
•
If the microphone picks up voices other than yours,
the command may be misinterpreted.
State or local laws may prohibit the operation of
handheld electronic devices while operating a
vehicle.
Up to 20 speed dial entries can be stored. If there is
no entry in the system, Speed Dial is disabled.
2
P. 413
Up to 20 call histories can be stored. If there is no call
history, Call History is disabled.
Models with color audio system
(Talk) Button
(
+
(
-
Bar
(Hang-up/Back) Button
(Pick-up) Button
Selector Knob
(Phone) Button
399
uu
Bluetooth
®
HandsFreeLink
®
u
Using HFL
Features
The audio/information screen notifies you
when there is an incoming call.
Certain manual functions are disabled or inoperable while the vehicle is in motion.
You cannot select a grayed-out option until the vehicle is stopped.
Only previously stored speed dial entries can be called using voice commands while
the vehicle is in motion.
2
■
HFL Status Display
1
Bluetooth
®
Wireless Technology
The
Bluetooth
®
word mark and logos are registered
trademarks owned by
Bluetooth
SIG, Inc., and any
use of such marks by Honda Motor Co., Ltd., is under
license. Other trademarks and trade names are those
of their respective owners.
HFL Limitations
An incoming call on HFL will interrupt the audio
system when it is playing. It will resume when the call
is ended.
HFL Mode
Battery Level Status
Signal Strength
Bluetooth
Indicator
Appears when your
phone is connected
to HFL.
Roam Status
Call Name
■
Limitations for Manual Operation
1
The information that appears on the audio/
information screen varies between phone models.
400
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
HFL Menus
The power mode must be in ACCESSORY or ON to use the system.
1
To use HFL, you must first pair your
Bluetooth
-
compatible cell phone to the system while the vehicle
is parked.
Some functions are limited while driving. A message
appears on the screen when the vehicle is moving
and the operation is canceled.
or
Display the last 20 outgoing calls.
Display the last 20 incoming calls.
Display the last 20 missed calls.
*1 : Appears only when a phone is connected to HFL.
Speed Dial
*1
Add New
Select a phone number from the call history to
store as a speed dial number.
Call History
Phonebook
Select a phone number from the phonebook to
store as a speed dial number.
Phone Number
Enter a phone number to store as a speed dial
number.
Dialed Calls
Received Calls
Missed Calls
Phonebook
*1
Dial
*1
Call History
*1
Display the paired phone’s phonebook.
Enter a phone number to dial.
(Existing entry list)
401
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Continued
Features
*1 : Appears only when a phone is connected to HFL.
Redial the last number dialed in the phone’s history.
Add New Device
Connect a Phone
Connect an Audio Device
Bluetooth Setup
Phone Setup
Redial
*1
Pair a phone to the system.
Connect a phone to the system.
Create a code for a paired phone.
Disconnect All Devices
Delete Device
Pass-key
Disconnect a paired phone from the system.
Delete a previously paired phone.
Connect a
Bluetooth
®
Audio device to the
system.
Priority Device Setup
Set a priority device to the system.
402
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
*1 : Appears only when a phone is connected to HFL.
Call History
Phonebook
Phone Number
Speed Dial
*1
Select a phone number from the phonebook
to store as a speed dial number.
Select a phone number from the call history
to store as a speed dial number.
Create a voice tag for a speed dial number.
Change Speed Dial
Delete Speed Dial
Store Voice Tag
Enter a phone number to store as a speed dial
number.
Delete a previously stored speed dial number.
Change Voice Tag
Delete Voice Tag
Change a previously stored speed dial
number.
Change a voice tag for a speed dial number.
Delete a voice tag for a speed dial number.
Add New
Existing entry list
403
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Continued
Features
Fixed
Mobile Phone
Auto Transfer
Ringtone
Select the ring tone stored in the connected
cell phone.
Name Priority
Number Priority
Caller ID Info
Prioritize the caller’s name as the caller ID.
Set calls to automatically transfer from your phone to HFL
when you enter the vehicle.
Prioritize the caller’s phone number as the
caller ID.
Select the ring tone stored in HFL.
System Clear
Clear the system of all paired phones, phonebook entries,
and security codes.
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
404
Features
■
To pair a cell phone (No phone has
been paired to the system)
1.
Press the
button or the
button.
2.
Make sure your phone is in search or
discoverable mode.
3.
Rotate
to
select
Yes
, then press
.
u
The audio system will enter a waiting
mode for pairing.
4.
Select
HandsFreeLink
®
from your phone.
u
If you want to pair a phone from this
audio system, press
and follow the
prompts.
When your phone appears on the list,
select it by pressing
.
5.
The system gives you a pairing code on the
audio/information screen.
u
Confirm if the pairing code on the screen
and your phone match.
This may vary by phone.
6.
A notification appears on the screen if
pairing is successful.
■
Phone Setup
1
Your
Bluetooth
-compatible phone must be paired to
HFL before you can make and receive hands-free
calls.
Phone Pairing Tips:
•
You cannot pair your phone while the vehicle is
moving.
•
Up to six phones can be paired.
•
Your phone’s battery may drain faster when it is
paired to HFL.
•
If your phone is not ready for pairing or not found
by the system within 30 seconds, the system will
time out and return to idle.
Once you have paired a phone, you can see it
displayed on the screen with one or two icons on the
right side.
These icons indicate the following:
: The phone can be used with HFL.
: The phone is compatible with
Bluetooth
®
Audio.
When pairing a phone from this audio system:
If your phone doesn’t appear on the audio/
information screen, select
Refresh
and search for
Bluetooth
®
devices using your phone.
From your phone, select
HandsFreeLink
®
.
405
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Continued
Features
■
To pair a cell phone (when a phone has
already been paired to the system)
1.
Press the
button or the
button.
2.
Rotate
to select
Yes
, then press
.
3.
Rotate
to select
Add New Device
,
then press
.
4.
Press
to select
OK
.
u
The screen changes to device list.
5.
Make sure your phone is in search or
discoverable mode, then press
.
u
HFL automatically searches for a
Bluetooth
®
device.
6.
When your phone appears on the list, select
it by pressing
.
u
If your phone does not appear, select
Refresh
and search for
Bluetooth
®
devices using your phone.
From your phone, select
HandsFreeLink
®
.
7.
The system gives you a pairing code on the
audio/information screen.
u
Confirm if the pairing code on the screen
and your phone match.
This may vary by a phone.
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
406
Features
■
To change the currently paired phone
1.
Press the
button or the
button.
2.
Rotate
to
select
Phone Setup
, then
press .
3.
Rotate
to
select
Bluetooth Setup
, then
press .
4.
Rotate
to
select
Connect a Phone
,
then press
.
u
The screen changes to a device list.
5.
Rotate
to select a desired device name,
then press
.
u
HFL disconnects the connected phone
and starts searching for another paired
phone.
1
To change the currently paired phone
To change the
Bluetooth
®
connection priority device
setting, select
Priority Device Setup
from the
Bluetooth Setup
screen.
407
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Continued
Features
■
To change the pairing code setting
1.
Press the
button or the
button.
2.
Rotate
to select
Phone Setup
, then
press .
3.
Rotate
to select
Bluetooth Setup
, then
press .
4.
Rotate
to select
Pass-Key
, then press
.
5.
Input a new pairing code, then press
.
408
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
■
To delete a paired phone
1.
Press the
button or the
button.
2.
Rotate
to
select
Phone Setup
, then
press .
3.
Rotate
to
select
Bluetooth Setup
, then
press .
4.
Rotate
to
select
Delete Device
, then
press .
u
The screen changes to a device list.
5.
Rotate
to select a phone you want to
delete, then press
.
6.
A confirmation message appears on the
screen. Rotate
to select
Yes
, then press
.
Continued
409
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
You can change the ring tone setting.
1.
Press the
button or the
button.
2.
Rotate
to select
Phone Setup
, then
press .
3.
Rotate
to select
Ringtone
, then press
.
4.
Rotate
to select
Mobile Phone
or
Fixed
, then press
.
You can select a caller’s information to be displayed when you have an incoming
call.
1.
Press the
button or the
button.
2.
Rotate
to select
Phone Setup
, then
press .
3.
Rotate
to select
Caller ID Info
, then
press .
4.
Rotate
to select a mode you want, then
press .
■
Ring Tone
1
Mobile Phone:
Depending on the make and model
of the cell phone, the ring tone stored in the phone
will sound if the phone is connected.
Fixed:
The fixed ring tone sounds from the speakers.
■
Caller’s ID Information
1
Name Priority:
A caller’s name is displayed if it is
stored in the phonebook.
Number Priority:
A caller’s phone number is
displayed.
410
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
If paring between your phone and the system is executed while you are on the
phone, the call can be automatically transferred to HFL.
1.
Press the
button or the
button.
2.
Rotate
to
select
Phone Setup
, then
press .
3.
Rotate
to
select
Auto Transfer
.
4.
Press
to select
On
or
Off
.
■
Automatic Transferring
411
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Continued
Features
Pairing codes, paired phones, all stored voice tags, all speed dial entries, all call
history data, and all imported phonebook data are erased.
1.
Press the
button or the
button.
2.
Rotate
to select
Phone Setup
, then
press .
3.
Rotate
to select
System Clear
, then
press .
4.
Rotate
to select
Yes
, then press
.
5.
A confirmation message appears on the
screen. Rotate
to select
Yes
, then press
.
6.
A notification appears on the screen. Press
.
■
To Clear the System
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
412
Features
When your phone is paired, the contents of its phonebook and call history are
automatically imported to HFL.
■
Automatic Import of Cellular Phonebook and Call History
1
Automatic Import of Cellular Phonebook and Call History
When you select a person from the list in the cellular
phonebook, you can see up to three category icons.
The icons indicate what types of numbers are stored
for that name.
If a name has four or more numbers, ... appears
instead of category icons.
On some phones, it may not be possible to import the
category icons to HFL.
The phonebook is updated after every connection.
Call history is updated after every connection or call.
Pref
Home
Mobile
Pager
Work
Fax
Car
Voice
Other
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст