Honda Odyssey (2023 year). Manual in english — page 27
430
uu
Customized Features
u
Features
*1:Default Setting
Setup
Group
Customizable Features
Description
Selectable Settings
Sound
Bass / Treble
Adjusts the settings of the audio speakers’ sound.
2
P. 291
Center /
Subwoofer
Volume
(
Subwoofer
Volume
)
Balance /
Fader
Audio Zones
*
Speed Volume
Compensation
DTS Neural
Surround
*
Notifications
Changes the notification settings for apps.
—
* Not available on all models
431
uu
Customized Features
u
Defaulting All the Settings
Features
Defaulting All the Settings
Reset all the menu and customized settings as the factory defaults.
1.
Select .
2.
Select
Settings
.
3.
Select
System
.
4.
Select
Factory Data Reset
.
u
A confirmation message appears on the
screen.
5.
Select
Continue
to reset the settings.
6.
Select
Continue
again to reset the settings.
u
The system will reboot.
1
When you transfer the vehicle to a third party, reset
all settings to default and delete all personal data.
If you perform
Factory Data Reset
, it will reset the
preinstalled apps to their factory default.
If you perform
Factory Data Reset
, you cannot use
the HondaLink
®
because it becomes off line.
2
432
Features
HomeLink
®
Universal Transceiver
*
The HomeLink
®
Universal Transceiver can be programmed to operate up to three
remote controlled devices around your home, such as garage doors, lighting, or
home security systems.
Refer to the safety information that came with your garage door opener to test that
the safety features are functioning properly. If you do not have the safety
information, contact the manufacturer.
Before programming HomeLink, make sure that people and objects are out of the
way of the garage or gate to prevent potential injury or damage.
When programming a garage door opener, park just outside the garage door’s path.
■
Important Safety Precautions
1
Before programming HomeLink to operate a garage
door opener, confirm that the opener has an external
entrapment protection system, such as an “electronic
eye,” or other safety and reverse stop features. If it
does not, HomeLink may not be able to operate it.
* Not available on all models
433
uu
HomeLink
®
Universal Transceiver
*
u
Training HomeLink
Continued
Features
Training HomeLink
If it is necessary to erase a previously entered
learned code:
•
Press and hold the I and III HomeLink
buttons for about 10 seconds, until the
green indicator blinks. Release the buttons,
and proceed to step 1.
•
If you are training the second or third
button, go directly to step 1.
The instructions on the next page should work for most gate or garage openers, but
may not work for all. For detailed instructions about your specific remote opener,
visit
http://www.homelink.com
or call (800) 355-3515.
1
NOTE:
Some LED lightbulbs installed in the garage door
opener can interfere with the training and consistent
operation of your HomeLink device. Please consider
use of Low RF interference bulbs in your garage door
opener.
Indicator
I HomeLink
Button
III HomeLink
Button
uu
HomeLink
®
Universal Transceiver
*
u
Training HomeLink
434
Features
■
Programming a Button
1
Reprogramming a Button
If you want to retrain a programmed button for a
new device, you do not have to erase all button
memory. You can replace the existing memory code
using this procedure:
2.
1.
Press and hold the desired HomeLink button until
the HomeLink indicator begins to
slowly flash
orange
. This should take about 20 seconds.
Release the HomeLink button and position the
remote transmitter you wish to link 1 - 3 inches
(3 - 8 cm) from the HomeLink button you want to
program, then follow steps 3 - 6 under
“programming a button.”
Erasing Button Memory
To erase programming from the buttons, press and hold
the two outside HomeLink buttons until the HomeLink
indicator changes from
orange to rapidly flashing green
.
This should take about 10 seconds. You should erase all
programming before selling the vehicle.
Operating
To operate, simple press and release the
programmed HomeLink button. Activation will now
occur for the trained device.
Questions
For questions or comments, visit
www.HomeLink.com
,
www.youtube.com/
HomeLinkGentex
, or by calling the HomeLink Hotline
(North America only) at (800) 355-3515.
HomeLink
®
is a registered trademark of Gentex
Corporation.
Training
Complete
HomeLink LED is
continuously on green
.
YES
YES
1.
Position the remote transmitter you wish to link 1 to 3 inches (3 - 8 cm) from the
HomeLink
®
button you want to program.
3b.
Canadian Garage Door Opener
A. Press and release the HomeLink
button. Press, hold and release the
button on the remote every 2 secs.
Does the HomeLink indicator (LED)
change from
slowly flashing orange to
rapidly flashing or continuously on
green
? The process should take less
than 60 seconds.
NO
2.
Press and release the desired HomeLink button. Is the HomeLink indicator (LED)
slowly
flashing orange
?
NO
3a.
Hold the button on the remote
transmitter. Does HomeLink indicator
(LED) change from
slowly flashing
orange to rapidly flashing green or
continuously on green
? The process
should take less than 60 seconds.
5.
Press and hold the HomeLink button again.
HomeLink indicator
rapidly flashes
green
.
5a.
The remote has a rolling code. Press the
“learn” button on the remote-controlled
device (e.g. garage door opener).
6.
Press and hold the HomeLink button
again.
The remote-controlled device should
operate.
Training Complete
5b.
Within 30 secs, press and hold the
programmed HomeLink button for 2
secs.
4.
Press and hold the programmed HomeLink
button for about a second. Does the device
(garage door opener) work?
435
Continued
Features
Bluetooth
®
HandsFreeLink
®
Bluetooth
®
HandsFreeLink
®
(HFL) allows you to place and receive phone calls using
your vehicle’s audio system, without handling your cell phone.
Using HFL
■
HFL Buttons
1
Place your phone where you can get good reception.
To use HFL, you need a
Bluetooth
-compatible cell
phone. For a list of compatible phones, pairing
procedures, and special feature capabilities, ask a
dealer or your Honda dealer.
To use the system, the
Bluetooth
setting must be
ON
.
2
P. 440
Voice control tips
•
Aim the vents away from the ceiling and close the
windows, as noise coming from them may interfere
with the microphones.
•
Press the
button when you want to call a
number using a phonebook name or a number.
Speak clearly and naturally after a beep.
•
If the microphones pick up voices other than yours,
the command may be misinterpreted.
•
To change the volume level, the volume level is able
to change by the audio system’s volume.
If there is no speed dial entry in the system, the pop-
up notification appears on the screen.
2
If there is no call history, the call history is disabled.
(Talk) Button
Volume up
(Hang-up) Button
(Pick-up) Button
Volume down
ENTER
Button
(Back) Button
/
/
/
Buttons
3 4
(Home) Button
uu
Bluetooth
®
HandsFreeLink
®
u
Using HFL
436
Features
(Pick-up) button:
Press to go directly to the phone screen of the driver
information interface, or to answer an incoming call.
(Hang-up) button:
Press to end a call.
(Back) button:
Press to go back to the previous screen, or cancel a command.
(Talk) button:
Press to access Voice Portal.
/
/
/
buttons:
Press to select an item displayed on the phone screen
of the driver information interface.
ENTER button:
Press to call a number listed in the selected item on the phone
screen of the driver information interface.
(Home) button:
Press to go back to the home screen of the driver information
interface.
To go to the phone screen of the driver information interface:
1.
Press the
(home) button on the steering wheel.
2.
Select
Phone
.
u
You can select
Favorite Contacts
or
Recent Calls
.
1
Bluetooth
®
Wireless Technology
The
Bluetooth
®
word mark and logos are registered
trademarks owned by
Bluetooth
SIG, Inc., and any
use of such marks by Honda Motor Co., Ltd., is under
license. Other trademarks and trade names are those
of their respective owners.
HFL Limitations
An incoming call on HFL will interrupt the audio
system when it is playing. It will resume when the call
is ended.
3 4
437
uu
Bluetooth
®
HandsFreeLink
®
u
Using HFL
Features
The audio/information screen notifies you when there is an incoming call.
Certain manual functions are disabled or inoperable while the vehicle is in motion.
You cannot select a grayed-out option until the vehicle is stopped.
Only previously stored phonebook names or numbers can be called using voice
commands while the vehicle is in motion.
2
■
HFL Status Display
1
The information that appears on the audio/
information screen varies between phone models.
■
Limitations for Manual Operation
*
Bluetooth
Indicator
Appears when your phone is
connected to HFL.
Signal Strength
HFL Mode
Battery Level Status
Caller’s Name
Caller’s Number
* Not available on all models
438
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
HFL Menus
The power mode must be in ACCESSORY or ON to use the system.
■
Phone settings screen
1.
Select .
2.
Select
Phone
.
3.
Select
Settings
.
1
To use HFL, you must first pair your
Bluetooth
-
compatible cell phone to the system while the vehicle
is parked.
Some functions are limited while driving.
Change Connected Phone
(Existing entry list)
+ Connect New Device
Pair a new phone to the system.
Connect, disconnect, or delete a paired device.
Ringtone
Select the ring tone.
Auto Sync Phone
Set phonebook and call history data to be automatically imported when a phone is paired to HFL.
Turn HondaLink
®
Assist on and off.
HondaLink Assist
Auto Phone Call Transfer
Set calls to automatically transfer from your phone to HFL when you enter the vehicle.
439
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Continued
Features
■
Phone menu screen
1.
Select .
2.
Select
Phone
.
Display the last outgoing, incoming and missed calls.
Recent Calls
Favorite Contacts
All
Dialed
Received
Display the last outgoing calls.
Display the last incoming calls.
Missed
Display the last missed calls.
Keypad
Enter a phone number to dial.
(Existing entry list)
Dial the selected number in the speed dial list.
Contacts
Display the paired phone’s phonebook.
440
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
■
Bluetooth
®
setup
You can turn
Bluetooth
®
function on and off.
1.
Select .
2.
Select
Settings
.
3.
Select
Connections
.
4.
Select
Bluetooth
.
5.
Select
Options
.
6.
Select
Bluetooth
, then
ON
.
■
Phone Setup
Continued
441
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
■
To pair a cell phone (when there is no
phone paired to the system)
1.
Select .
2.
Select
Phone
.
3.
Select
Connect Phone
.
4.
Make sure your phone is in search or
discoverable mode, then select
+ Connect
New Device
.
u
HFL automatically searches for a
Bluetooth
®
device.
5.
Select your phone when it appears on the
list.
u
If your phone still does not appear,
search for
Bluetooth
®
devices using your
phone.
From your phone, search for
HandsFree
Link
.
6.
The system gives you a pairing code on the
audio/information screen.
u
Confirm if the pairing code on the screen
and your phone match.
This may vary by phone.
7.
Select desired functions and then select
Connect
.
u
A confirmation message appears on the
screen. Select
Continue
or
Connect
without Internet
.
1
Your
Bluetooth
-compatible phone must be paired to
the system before you can make and receive hands-
free calls.
Phone Pairing Tips:
•
You cannot pair your phone while the vehicle is
moving.
•
Up to six phones can be paired.
•
Your phone’s battery may drain faster when it is
paired to the system.
Once you have paired a phone, you can see it
displayed on the screen with one or more icons on
the right side.
These icons indicate the following:
: The phone is compatible with
Bluetooth
®
Audio.
: The phone can be used with HFL.
: The phone can be used with the internet
tethering.
If there is an active connection to Apple CarPlay or
Android Auto, pairing of additional
Bluetooth
compatible devices is unavailable and
+ Connect
New Device
is grayed out from the
Bluetooth
screen.
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
442
Features
■
To change the currently paired phone
1.
Go to the phone settings screen.
2
P. 438
2.
Select
Change Connected Phone
.
3.
Select a phone to connect.
u
HFL disconnects the connected phone
and starts searching for another paired
phone.
4.
Select ,
or .
5.
Select
Apply
.
■
To delete a paired phone
1.
Go to the phone settings screen.
2
P. 438
2.
Select
Change Connected Phone
.
3.
Select a phone you want to delete.
4.
Select
Delete Device
.
5.
A confirmation message appears on the
screen. Select
Delete
.
1
To change the currently paired phone
If no other phones are found or paired when trying to
switch to another phone, HFL will inform you that the
original phone is connected again.
To pair other phones, select
+ Connect New Device
from the
Bluetooth
screen.
Continued
443
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Features
You can change the ring tone setting.
1.
Go to the phone settings screen.
2
P. 438
2.
Select
Ringtone
.
3.
Select
Vehicle
or
Phone
.
If you get into the vehicle while you are on the phone, the call can be automatically
transferred to HFL.
1.
Go to the phone settings screen.
2
P. 438
2.
Select
Auto Phone Call Transfer
.
3.
Select
ON
or
OFF
.
■
Ring Tone
1
Vehicle
: The fixed ring tone sounds from the
speakers.
Phone
: Depending on the make and model of the
mobile phone, the ring tone stored in the phone will
sound if the phone is connected.
■
Automatic Transferring
Phone
FM
Auto Phone Call Transfer
ON
OFF
12:34
Navigation
When vehicle is turned on, automatically transfer an
active call from device to vehicle speakers.
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
444
Features
■
When Automatic Phone Sync is set to
On:
When your phone is paired, the contents of its
phonebook and call history are automatically
imported to the system.
■
Changing the Automatic Phone Sync
setting
1.
Go to the phone settings screen.
2
P. 438
2.
Select
Auto Sync Phone
.
3.
Select
ON
or
OFF
.
■
Automatic Import of Cellular Phonebook and Call History
1
Automatic Import of Cellular Phonebook and Call History
When you select a name from the list in the cellular
phonebook, you can see a category icon. The icons
indicate what types of numbers are stored for that
name.
On some phones, it may not be possible to import the
category icons to the system.
The phonebook is updated after every connection.
Call history is updated after every connection or call.
Home
Mobile
Work
Other
445
uu
Bluetooth
®
HandsFreeLink
®
u
HFL Menus
Continued
Features
To store a speed dial number:
1.
Go to the phone menu screen.
2
P. 439
2.
Select the
Recent Calls
,
Contacts
, or
Keypad
screen.
3.
Select the star icon.
u
A notification appears on the screen if
the speed dial is successfully stored.
u
To remove the speed dial, select the star
icon again.
■
Favorite Contacts
Recent Calls
Screen
Contacts
Screen
Keypad
Screen
Star Icon
Star Icon
Star Icon
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст