Honda Accord Coupe (2017 year). Instruction — part 7
96
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the area around the camera is
blocked by dirt, mud, etc. Stop your vehicle in a safe
place, and wipe it off with a soft cloth.
●
May appear when driving in bad weather (rain,
snow, fog, etc.).
●
Have your vehicle checked by a dealer if the message
appears again after you cleaned the area around the
camera.
●
Appears if the temperature inside the camera is too
high.
●
ACC/LKAS has been automatically canceled.
●
Use the climate control system to cool down the camera.
●
Goes off - The camera has been cooled down. Pressing
the MAIN/LKAS button can resume the system.
2 Adaptive Cruise Control (ACC)
2 Lane Keeping Assist System (LKAS)
●
Appears when the vehicle is driving out of a detected
line. The steering wheel vibrates rapidly.
●
Keep the vehicle within the lane you are driving.
●
The color of either line changes from white to amber as
the vehicle gets closer to that side of the lane line.
2 Lane Keeping Assist System (LKAS)
●
Appears when the vehicle is driving out of a detected
line.
- The steering wheel vibrates rapidly when the
vehicle is drifting out of a detected line.
- The steering wheel vibrates rapidly when the
vehicle is drifting out of a detected line. The system
also steers the vehicle to help you remain within
your driving lane.
●
Keep the vehicle within the lane you are driving.
●
The color of either line changes from white to amber as
the vehicle gets closer to that side of the lane line.
2 Road Departure Mitigation (RDM) System
●
You can change the setting for the road departure
mitigation system. Normal, Wide, and Warning Only
can be selected.
2 Customized Features P. 106, 298, 316
Lane Keeping Assist System (LKAS)
Road Departure Mitigation (RDM) System
When you selected Warning Only
When you selected Normal or Wide
* Not available on all models
97
uu
Indicators
u
Multi-Information Display Warning and Information Messages
*
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Blinks when you fail to steer the vehicle. The beeper
sounds simultaneously.
●
Operate the steering wheel to resume the LKAS.
●
Appears when the LKAS is in operation, or the LKAS
button is pressed, but there is a problem with a
system related to the LKAS. The LKAS cancels
automatically. The beeper sounds simultaneously.
●
If any other system indicators come on, such as the
VSA®, ABS and brake system, take appropriate action.
Message
Condition
Explanation
●
Appears when you unlock and open the driver’s
door while the engine is running by smart entry
remote.
Models with remote engine starter
* Not available on all models
98
In
strum
e
nt Pa
nel
Gauges and Displays
Gauges
Gauges include the speedometer, tachometer, fuel gauge, and related indicators.
They are displayed when the ignition switch is in ON
(
w
*1
.
Displays your driving speed in mph (U.S.) or km/h (Canada).
Shows the number of engine revolutions per minute.
Displays the amount of fuel left in the fuel tank.
Displays the temperature of the engine coolant.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
■
Speedometer
■
Tachometer
■
Fuel Gauge
■
Temperature Gauge
1
NOTICE
You should refuel when the reading approaches
.
Running out of fuel can cause the engine to misfire,
damaging the catalytic converter.
The actual amount of remaining fuel may differ from
the fuel gauge reading.
E
1
NOTICE
Driving with the temperature gauge pointer in the
upper zone can cause serious engine damage. Pull
safely to the side of the road and allow engine
temperature to return to normal.
99
uu
Gauges and Displays
u
Information Display
*
Continued
In
strum
e
nt Pa
nel
Information Display
*
The information display shows the odometer, trip meter, engine oil life and
maintenance service item codes, and other gauges.
Press the
(Select/Reset) knob to change the display.
■
Switching the Display
1
Each time you press the
knob, the information
display changes as follows:
Some of the items on the information display also
appear on the audio/information screen. They also
change along with the information display changes
while the fuel consumption is shown.
Instant Fuel Economy,
Odometer, Trip Meter A,
Outside Temperature
Instant Fuel Economy,
Range, Trip Meter A,
Outside Temperature
Engine Oil Life
Instant Fuel Economy, Average
Fuel Economy A, Trip Meter A,
Outside Temperature
Instant Fuel Economy, Average
Fuel Economy B, Trip Meter B,
Outside Temperature
Select/Reset
Knob
* Not available on all models
uu
Gauges and Displays
u
Information Display
*
100
In
strum
e
nt Pa
nel
Shows the total number of miles (U.S.) or kilometers (Canada) that your vehicle has
accumulated.
Shows the total number of miles (U.S.) or kilometers (Canada) driven since the last
reset. Meters A and B can be used to measure two separate trips.
■
Resetting a trip meter
To reset a trip meter, display it, then press and hold the
knob. The trip meter is
reset to 0.0.
Shows the estimated average fuel economy of each trip meter in mpg (U.S.) or l/100
km (Canada). The display is updated at set intervals. When a trip meter is reset, the
average fuel economy is also reset.
Shows the instant fuel economy as a bar graph in mpg (U.S.) or l/100 km (Canada).
Shows the remaining oil life and Maintenance Minder
TM
.
P. 505
■
Odometer
■
Trip Meter
■
Average Fuel Economy
■
Instant Fuel Economy
■
Engine Oil Life
1
Switch between trip meter A and trip meter B by
pressing the
knob.
1
You can change when to reset the average fuel
economy.
101
uu
Gauges and Displays
u
Information Display
*
In
strum
e
nt Pa
nel
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■
Adjusting the outside temperature indicator
Adjust the temperature reading up to ± 5°F or ± 3°C if the temperature reading
seems incorrect.
1. Turn the ignition switch to ON
(
w
*1
.
2. Press and hold the
(Select/Reset) knob for 10 seconds or more while the
outside temperature is shown on the information display.
u
The information display goes into temperature adjustment mode. The display
starts showing from -5°F to +5°F (U.S.) or -3°C to +3°C (Canada).
3. Release the
knob when the right adjustment amount is shown.
u
The adjustment is complete.
Shows the estimated distance you can travel on the remaining fuel. This distance is
estimated from the fuel economy of your previous trips.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
■
Outside Temperature
■
Range
1
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
102
uu
Gauges and Displays
u
Multi-Information Display
*
In
strum
e
nt Pa
nel
Multi-Information Display
*
The multi-information display shows the odometer, trip meter, outside temperature
indicator, and other gauges.
It also displays important messages such as warnings and other helpful information.
■
Main displays
Press the
(information) button to change the display.
■
Switching the Display
Average Fuel Economy/
Instant Fuel Economy
Range
Elapsed Time
Average Speed
Blank Screen
Vehicle Settings
Engine Oil Life
Button
* Not available on all models
103
uu
Gauges and Displays
u
Multi-Information Display
*
Continued
In
strum
e
nt Pa
nel
■
Lower displays
Press the SEL/RESET button to change the display.
Odometer
Trip A
Trip B
SEL/RESET
Button
uu
Gauges and Displays
u
Multi-Information Display
*
104
In
strum
e
nt Pa
nel
Shows the total number of miles (U.S.) or kilometers (Canada) that your vehicle has
accumulated.
Shows the total number of miles (U.S.) or kilometers (Canada) driven since the last
reset. Meters A and B can be used to measure two separate trips.
■
Resetting a trip meter
To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip
meter is reset to 0.0.
Shows the estimated average fuel economy of each trip meter in mpg (U.S.) or l/100
km (Canada). The display is updated at set intervals. When a trip meter is reset, the
average fuel economy is also reset.
Shows the estimated distance you can travel on the remaining fuel. This distance is
estimated from the fuel economy of your previous trips.
Shows the time elapsed since Trip A or Trip B was reset.
■
Odometer
■
Trip Meter
■
Average Fuel Economy
■
Range
■
Elapsed Time
1
Switch between trip meter A and trip meter B by
pressing the SEL/RESET button.
1
You can change when to reset the average fuel
economy.
2 Customized Features P. 106, 298, 316
1
You can change when to reset the elapsed time.
Continued
105
uu
Gauges and Displays
u
Multi-Information Display
*
In
strum
e
nt Pa
nel
Shows the average speed in mph (U.S.) or km/h (Canada) since Trip A or Trip B was
reset.
Shows the instant fuel economy as a bar graph in mpg (U.S.) or l/100 km (Canada).
Shows the remaining oil life and Maintenance Minder
TM
.
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■
Adjusting the outside temperature display
Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading
seems incorrect.
■
Average Speed
■
Instant Fuel Economy
■
Engine Oil Life
■
Outside Temperature
1
You can change when to reset the average speed.
2 Customized Features P. 106, 298, 316
1
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
Use the multi-information display's customized
features to correct the temperature.
uu
Gauges and Displays
u
Multi-Information Display
*
106
In
strum
e
nt Pa
nel
Use the multi-information display to customize certain features.
■
How to customize
Select the Vehicle Settings screen by pressing the
button while the
ignition switch is in ON
(
w
*1
, and the vehicle is at a complete stop.
Press the SEL/RESET button.
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
■
Customized Features
1
To customize other features, press the
button.
2 List of customizable options P. 109
2 Example of customization settings P. 113
Customization is possible when you see the driver’s
ID (Driver 1 or Driver 2) on the screen.
The driver’s ID indicates which remote transmitter
you have used to unlock the driver’s door. The
customized settings are recalled every time you
unlock the driver’s door with that remote.
When you customize settings: Shift to
(
P
Button:
Changes the customize
menus and items.
Multi-Information Display:
Goes to Vehicle Settings.
SEL/RESET button:
Enters the selected item.
107
uu
Gauges and Displays
u
Multi-Information Display
*
Continued
In
strum
e
nt Pa
nel
■
Customization flow
Press the
button.
SEL/RESET
Vehicle Settings
“Trip A” Reset Timing
Language Selection
Adjust Outside Temp. Display
Memory Position Link
Door Unlock Mode
Keyless Access Light Flash
4
4
4
4
TPMS Calibration
Driver Assist System Setup
Meter Setup
Position Setup
Keyless Access Setup
SEL/RESET
SEL/RESET
SEL/RESET
SEL/RESET
“Trip B” Reset Timing
Fuel Efficiency Backlight
4
ACC Pre-Running Car Detect Beep
ACC Display Speed Unit
4
Keyless Start Guidance Screens
SEL/RESET
Keyless Access Beep
Forward Collision Warning Distance
4
4
4
Lane Keep Assist Suspend Beep
Road Departure Mitigation Setting
Remote Start System ON/OFF
*
* Not available on all models
108
uu
Gauges and Displays
u
Multi-Information Display
*
In
strum
e
nt Pa
nel
Exit
4
4
4
Door Setup
Maintenance Reset
Default All
SEL/RESET
4
SEL/RESET
4
Lighting Setup
SEL/RESET
4
Key And Remote Unlock Mode
Auto Door Lock
Auto Door Unlock
Keyless Lock Answer Back
Security Relock Timer
Interior Light Dimming Time
Headlight Auto Off Timer
Auto Light Sensitivity
4
4
109
uu
Gauges and Displays
u
Multi-Information Display
*
Continued
In
strum
e
nt Pa
nel
■
List of customizable options
*1:Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
TPMS
Calibration
—
Calibrates the TPMS.
Cancel/Calibrate
Driver Assist
System
Setup
Forward Collision
Warning Distance
Changes at which distance the CMBS
TM
alerts.
Long/Normal
*1
/Short
ACC Pre-Running Car
Detect Beep
Causes the system to beep when the system detects a
vehicle, or when the vehicle goes out of ACC range.
On/Off
*1
ACC Display Speed Unit
Changes the ACC display speed unit.
mph
*1
/km/h
(U.S.)
mph/km/h
*1
(Canada)
Road Departure
Mitigation Setting
Changes the setting for the road departure
mitigation system.
Normal
*1
/Wide/Warning
Only
Lane Keep Assist
Suspend Beep
Causes the system to beep when the LKAS is
suspended.
On/Off
*1
110
uu
Gauges and Displays
u
Multi-Information Display
*
In
strum
e
nt Pa
nel
*1:Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
Meter Setup
Language Selection
Changes the displayed language.
English
*1
/French/Spanish
Adjust Outside Temp.
Display
Adjusts the temperature reading by a few degrees.
-5°F ~ ±0°F
*1
~ +5°F
(U.S.)
-3°C ~ ±0°C
*1
~ +3°C
(Canada)
“Trip A” Reset Timing
Changes the setting of how to reset trip meter A,
average fuel economy A, average speed A, and
elapsed time A.
With Refuel/IGN Off/
Manually Reset
*1
“Trip B” Reset Timing
Changes the setting of how to reset trip meter B,
average fuel economy B, average speed B, and
elapsed time B.
With Refuel/IGN Off/
Manually Reset
*1
Fuel Efficiency Backlight
Turns the ambient meter feature on and off.
On
*1
/Off
Keyless Start Guidance
Screens
Displays the push button start guidance when
conditions are met to change power mode.
On
*1
/Off
Driving
Position
Setup
Memory Position Link
Changes the driver’s seat position to a stored
setting.
On
*1
/Off
111
uu
Gauges and Displays
u
Multi-Information Display
*
Continued
In
strum
e
nt Pa
nel
*1: Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
Keyless
Access
Setup
Door Unlock Mode
Changes which doors unlock when you grab the
driver’s door handle.
Driver Door Only
*1
/All Doors
Keyless Access Light
Flash
Causes some exterior lights to blink when you
unlock/lock the doors.
On
*1
/Off
Keyless Access Beep
Sets the beeper sound or not when you grab either
door handle.
On
*1
/Off
Remote Start System
ON/OFF
*
Turns the remote engine start feature on and off.
ON
*1
/OFF
Lighting
Setup
Interior Light Dimming
Time
Changes the length of time the interior lights stay on
after you close the doors.
60sec/30sec
*1
/15sec
Headlight Auto Off
Timer
Changes the length of time the exterior lights stay
on after you close the driver’s door.
60sec/30sec/15sec
*1
/0sec
Auto Light Sensitivity
Changes the timing for the headlights to come on.
Max/High/Mid
*1
/Low/Min
* Not available on all models
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст