Honda Element. Manual — part 210

YES -Repair the hydraulic system related with shift valves B and E, or replace the transmission, then go
to step 12.

NO -Replace A/T clutch pressure control solenoid valve A (see A/T CLUTCH PRESSURE
CONTROL SOLENOID VALVE A REPLACEMENT ), then go to step 12.

12. Turn the ignition switch ON (II).

13. Clear the DTC with the HDS.

14. Test-drive the vehicle in the D position through all five gears.

15. Turn the ignition switch OFF, and repeat the test-drive in step 14.

16. Check for DTCs with the HDS.

Is DTC P0747 indicated?

YES -Go to step 9.

NO -Go to step 17.

17. Monitor the OBD STATUS for P0747 in the DTCs MENU with the HDS.

Does the screen indicate PASSED?

YES -Troubleshooting is complete. If any other DTCs were indicated in step 16, go to the indicated
DTCs troubleshooting.

NO -If the screen indicates FAILED, go to step 9. If the screen indicates NOT COMPLETED, go to step
14.

DTC P0752: SHIFT SOLENOID VALVE A STUCK ON

1. Warm up the engine to normal operating temperature (the radiator fan comes on).

2. Make sure that the transmission is filled to the proper level, and check for fluid leaks.

3. Drain the ATF (see step 3 ) through a strainer. Inspect the strainer for metal debris or excessive clutch

material.

Does the strainer have metal debris or excessive clutch material?

YES -Replace the transmission, then go to step 14.

NO -Replace the ATF (see step 5 ), then go to step 4.

NOTE:

Before you troubleshoot, record all freeze data and any on-board snapshot, and
review General Troubleshooting Information (see GENERAL
TROUBLESHOOTING INFORMATION ).

2007 Honda Element EX

2007-2008 TRANSMISSION Automatic Transmission - Element

4. Turn the ignition switch ON (II).

5. Clear the DTC with the HDS.

6. Test-drive the vehicle in the D position through all five gears.

7. Turn the ignition switch OFF, and repeat the test-drive in step 6.

8. Monitor the OBD STATUS for P0752 in the DTCs MENU with the HDS.

Does the screen indicate FAILED?

YES -Go to step 9.

NO -If the screen indicates PASSED, intermittent failure, the system is OK at this time. If the screen
indicates NOT COMPLETED, go to step 6.

9. Clear the DTC with the HDS.

10. Select Shift Solenoid A in Miscellaneous Test Menu, and check that shift solenoid valve A operates with

the HDS.

Is a clicking sound heard?

YES -Go to step 11.

NO -Replace shift solenoid valve A (see SHIFT SOLENOID VALVE REPLACEMENT ), then go to
step 14.

11. Test-drive the vehicle in the D position through all five gears.

12. Turn the ignition switch OFF, and repeat the test-drive instep 11.

13. Monitor the OBD STATUS for P0752 in the DTCs MENU with the HDS.

Does the screen indicate FAILED?

YES -Repair shift valve A, or replace the transmission, then go to step 14.

NO -If the screen indicates PASSED, intermittent failure, the system is OK at this time. If the screen
indicates NOT COMPLETED, go to step 11.

14. Turn the ignition switch ON (II).

15. Clear the DTC with the HDS.

16. Test-drive the vehicle in the D position through all five gears.

17. Turn the ignition switch OFF, and repeat the test-drive instep 16.

18. Check for DTCs with the HDS.

Is DTC P0752 indicated?

YES -Go to step 9.

2007 Honda Element EX

2007-2008 TRANSMISSION Automatic Transmission - Element

NO -Go to step 19.

19. Monitor the OBD STATUS for P0752 in the DTCs MENU with the HDS.

Does the screen indicate PASSED?

YES -Troubleshooting is complete. If any other DTCs were indicated in step 18, go to the indicated
DTCs troubleshooting.

NO -If the screen indicates FAILED, go to step 9. If the screen indicates NOT COMPLETED, go to step
16.

DTC P0756: SHIFT SOLENOID VALVE B STUCK OFF

1. Warm up the engine to normal operating temperature (the radiator fan comes on).

2. Make sure that the transmission is filled to the proper level, and check for fluid leaks.

3. Drain the ATF (see step 3 ) through a strainer. Inspect the strainer for metal debris or excessive clutch

material.

Does the strainer have metal debris or excessive clutch material?

YES -Replace the transmission, then go to step 14.

NO -Replace the ATF (see step 5 ), then go to step 4.

4. Turn the ignition switch ON (II).

5. Clear the DTC with the HDS.

6. Test-drive the vehicle in the D position through all five gears.

7. Turn the ignition switch OFF, and repeat the test-drive in step 6.

8. Monitor the OBD STATUS for P0756 in the DTCs MENU with the HDS.

Does the screen indicate FAILED?

YES -Go to step 9.

NO -If the screen indicates PASSED, intermittent failure, the system is OK at this time. If the screen
indicates NOT COMPLETED, go to step 6.

9. Clear the DTC with the HDS.

10. Select Shift Solenoid B in Miscellaneous Test Menu, and check that shift solenoid valve B operates with

the HDS.

NOTE:

Before you troubleshoot, record all freeze data and any on-board snapshot, and
review General Troubleshooting Information (see GENERAL
TROUBLESHOOTING INFORMATION ).

2007 Honda Element EX

2007-2008 TRANSMISSION Automatic Transmission - Element

Is a clicking sound heard?

YES -Go to step 11.

NO -Replace shift solenoid valve B (see SHIFT SOLENOID VALVE REPLACEMENT ), then go to
step 14.

11. Test-drive the vehicle in the D position through all five gears.

12. Turn the ignition switch OFF, and repeat the test-drive instep 11.

13. Monitor the OBD STATUS for P0756 in the DTCs MENU with the HDS.

Does the screen indicate FAILED?

YES -Repair shift valve B, or replace the transmission, then go to step 14.

NO -If the screen indicates PASSED, intermittent failure, the system is OK at this time. If the screen
indicates NOT COMPLETED, go to step 11.

14. Turn the ignition switch ON (II).

15. Clear the DTC with the HDS.

16. Test-drive the vehicle in the D position through all five gears.

17. Turn the ignition switch OFF, and repeat the test-drive instep 16.

18. Check for DTCs with the HDS.

Is DTC P0756 indicated?

YES -Go to step 9.

NO -Go to step 19.

19. Monitor the OBD STATUS for P0756 in the DTCs MENU with the HDS.

Does the screen indicate PASSED?

YES -Troubleshooting is complete. If any other DTCs were indicated in step 18, go to the indicated
DTCs troubleshooting.

NO -If the screen indicates FAILED, go to step 9. If the screen indicates NOT COMPLETED, go to step
16.

DTC P0757: SHIFT SOLENOID VALVE B STUCK ON

NOTE:

Before you troubleshoot, record all freeze data and any on-board snapshot, and
review General Troubleshooting Information (see GENERAL
TROUBLESHOOTING INFORMATION ).

2007 Honda Element EX

2007-2008 TRANSMISSION Automatic Transmission - Element