Honda Element. Manual — part 616



Turn the ignition switch to ON (II).



Within 5 seconds, turn the headlights to AUTO, then to ON, and then to AUTO again.



Within 5 seconds, release the SELECT/RESET knob, then push and release the knob three times.

2. Once the gauge control module is in the self-diagnostic mode, press and hold the INFO button on the

steering wheel for 5 seconds to get to the CUSTOMIZE MENU.

3. Use the INFO button to scroll through to the PAX RESET screen, then press the SEL/RESET button on

the steering wheel.

4. Use the INFO button to scroll to the appropriate wheel, and then press the SEL/RESET button on the

steering wheel to reset the PAX warning system display. The screen should read "PAX RESET
COMPLETED". Repeat this step for each wheel that needs to be reset.

5. Use the INFO button to scroll through to EXIT, then press the SEL/RESET button.

6. Turn the ignition switch to OFF to exit the self-diagnostic mode.

2005-08 PILOT & RIDGELINE

2007-08 CR-V

NOTE:

If a flat tire is replaced with the spare tire, and the flat tire is stored in the cargo
area, the low pressure indicator will stay on but the appropriate tire indicator
will go off. This prevents the customer from thinking there is a problem with the
spare tire. When the flat tire is taken out of the vehicle for repair, the TPMS
indicator will come on because the system is no longer receiving the signal
from the tire's transmitter.

NOTE:

When a tire pressure sensor is replaced or tires are rotated, the sensor ID must
be memorized by the TPMS control unit. See TIRE PRESSURE SENSOR
REGISTRATION in appropriate manufacturer service information.

NOTE:

On models equipped with PAX tire systems, if a tire is repaired or replaced, the
warning indicator (and the mileage counter that supports it) must be reset, no
matter how far the vehicle was driven in the run flat mode. See appropriate
manufacturer service information.

NOTE:

If a flat tire is replaced with the spare tire, and the flat tire is stored in the cargo
area, the low pressure indicator will stay on but the appropriate tire indicator
will go off. This prevents the customer from thinking there is a problem with the
spare tire. When the flat tire is taken out of the vehicle for repair, the TPMS
indicator will come on because the system is no longer receiving the signal
from the tire's transmitter.

NOTE:

When a tire pressure sensor is replaced or tires are rotated, the sensor ID must
be memorized by the TPMS control unit. See TIRE PRESSURE SENSOR
REGISTRATION in appropriate manufacturer service information.

2007 Honda Element EX

GENERAL INFORMATION Service Reminder Indicators - Honda

2007-08 ELEMENT

2007-08 FIT

2007-08 S2000

2008 ACCORD

NOTE:

If a flat tire is replaced with the spare tire, and the flat tire is stored in the cargo
area, the low pressure indicator will stay on but the appropriate tire indicator
will go off. This prevents the customer from thinking there is a problem with the
spare tire. When the flat tire is taken out of the vehicle for repair, the TPMS
indicator will come on because the system is no longer receiving the signal
from the tire's transmitter.

NOTE:

When a tire pressure sensor is replaced or tires are rotated, the sensor ID must
be memorized by the TPMS control unit. See TIRE PRESSURE SENSOR
REGISTRATION in appropriate manufacturer service information.

NOTE:

If a flat tire is replaced with the spare tire, and the flat tire is stored in the cargo
area, the low pressure indicator will stay on but the appropriate tire indicator
will go off. This prevents the customer from thinking there is a problem with the
spare tire. When the flat tire is taken out of the vehicle for repair, the TPMS
indicator will come on because the system is no longer receiving the signal
from the tire's transmitter.

NOTE:

When a tire pressure sensor is replaced or tires are rotated, the sensor ID must
be memorized by the TPMS control unit. See TIRE PRESSURE SENSOR
REGISTRATION in appropriate manufacturer service information.

NOTE:

If a flat tire is replaced with the spare tire, and the flat tire is stored in the cargo
area, the low pressure indicator will stay on but the appropriate tire indicator
will go off. This prevents the customer from thinking there is a problem with the
spare tire. When the flat tire is taken out of the vehicle for repair, the TPMS
indicator will come on because the system is no longer receiving the signal
from the tire's transmitter.

NOTE:

When a tire pressure sensor is replaced or tires are rotated, the sensor ID must
be memorized by the TPMS control unit. See TIRE PRESSURE SENSOR
REGISTRATION in appropriate manufacturer service information.

NOTE:

If a flat tire is replaced with the spare tire, and the flat tire is stored in the cargo
area, the low pressure indicator will stay on but the appropriate tire indicator
will go off. This prevents the customer from thinking there is a problem with the
spare tire. When the flat tire is taken out of the vehicle for repair, the TPMS

2007 Honda Element EX

GENERAL INFORMATION Service Reminder Indicators - Honda

2008 CIVIC

indicator will come on because the system is no longer receiving the signal
from the tire's transmitter.

NOTE:

When a tire pressure sensor is replaced or tires are rotated, the sensor ID must
be memorized by the TPMS control unit. See TIRE PRESSURE SENSOR
REGISTRATION in appropriate manufacturer service information.

NOTE:

If a flat tire is replaced with the spare tire, and the flat tire is stored in the cargo
area, the low pressure indicator will stay on but the appropriate tire indicator
will go off. This prevents the customer from thinking there is a problem with the
spare tire. When the flat tire is taken out of the vehicle for repair, the TPMS
indicator will come on because the system is no longer receiving the signal
from the tire's transmitter.

NOTE:

When a tire pressure sensor is replaced or tires are rotated, the sensor ID must
be memorized by the TPMS control unit. See TIRE PRESSURE SENSOR
REGISTRATION in appropriate manufacturer service information.

2007 Honda Element EX

GENERAL INFORMATION Service Reminder Indicators - Honda

2007-08 MAINTENANCE

Maintenance - Element

LUBRICANTS AND FLUIDS

For details of lubrication points and type of lubricants to be applied, refer to LUBRICANTS AND FLUIDS
SPECIFICATION and various work procedures (such as Assembly/Reassembly, Replacement, Overhaul,
Installation, etc.) .

LUBRICANTS AND FLUIDS SPECIFICATION

Application

Lubricant or Fluid

A Engine

Honda Motor Oil: American Honda P/N 08798-9023 (5W-20), Honda
Canada P/N CA 66806 (5W-20)
Look for the API certification seal on the oil container. Make sure it says
"For Gasoline Engines." SAE viscosity: See chart.

B

Manual transmission

Honda Manual Transmission Fluid (MTF): P/N 08798-9031
Always use Honda MTF. Using motor oil can cause stiffer shifting
because it does not contain the proper additives.

Automatic transmission

Honda Automatic Transmission Fluid (ATF-Z1): American Honda P/N
08200-9001, Honda Canada P/N CA66689
Always use Honda ATF-Z1. Using a non-Honda ATF can affect shift
quality.

C

Brake system (including
VSA lines)

Honda DOT 3 Brake Fluid: P/N 08798-9008
Always use Honda DOT 3 Brake Fluid. Using a non-Honda brake fluid
can cause corrosion and decrease the life of the system.

D

Clutch system (manual
transmission)

Honda DOT 3 Brake Fluid: P/N 08798-9008
Always use Honda DOT 3 Brake Fluid. Using a non-Honda brake fluid
can cause corrosion and decrease the life of the system.

E

Shift cable ends (manual
transmission)

Honda Silicone Grease: P/N 08C30-B0234M

F Brake booster clevis pin

Multipurpose Grease

G

Clutch master cylinder
clevis pin (manual
transmission)

H

Release fork (manual
transmission)

I Battery terminals

J Pedal linkage

K Fuel fill door

L Hood hinges and hood latch

M

Tailgate hinges and tailgate
latch

N

Caliper piston boot and
seal, caliper pins and boots

Honda Silicone Grease: P/N 08C30-B0234M

2007 Honda Element EX

2007-08 MAINTENANCE Maintenance - Element

2007 Honda Element EX

2007-08 MAINTENANCE Maintenance - Element