Honda Element. Manual — part 593
2007-08 ENGINE
Intake Manifold and Exhaust System - Element
INTAKE MANIFOLD REMOVAL AND INSTALLATION
EXPLODED VIEW
Fig. 1: Exploded View Of Intake Manifold With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
REMOVAL
1. Disconnect the mass air flow (MAF) sensor/intake air temperature (IAT) sensor connector (A).
2007 Honda Element EX
2007-08 ENGINE Intake Manifold and Exhaust System - Element
2007 Honda Element EX
2007-08 ENGINE Intake Manifold and Exhaust System - Element
Fig. 2: Identifying Mass Air Flow (MAF) Sensor/Intake Air Temperature (IAT) Sensor Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Disconnect the vacuum hose (B) and breather pipe (C), then remove the intake air duct (D).
3. Remove the engine cover.
Fig. 3: Identifying Engine Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Remove the evaporative emission (EVAP) canister hose (A) manifold absolute pressure (MAP) sensor
connector (B) and brake booster vacuum hose (C).
2007 Honda Element EX
2007-08 ENGINE Intake Manifold and Exhaust System - Element
Fig. 4: Identifying Evaporative Emission Canister Hose, Manifold Absolute Pressure Sensor
Connector And Brake Booster Vacuum Hose
Courtesy of AMERICAN HONDA MOTOR CO., INC.
5. Remove the harness bracket mounting bolts (D).
6. Remove the water bypass hoses, then plug the water bypass hoses.
7. Disconnect the throttle actuator connector (A).
Fig. 5: Identifying Throttle Actuator Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
8. Remove the front grille cover.
2007 Honda Element EX
2007-08 ENGINE Intake Manifold and Exhaust System - Element
Fig. 6: Identifying Front Grille Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
9. Disconnect the fan motor connectors (A) and engine coolant temperature (ECT) sensor 2 connector (B),
then remove the harness clamps (C) and A/C compressor clutch connector (D).
Fig. 7: Identifying Fan Motor Connectors, Engine Coolant Temperature Sensor Connector,
Harness Clamps And A/C Compressor Clutch Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
10. Remove the upper brackets and cushions (A), then remove the bulkhead (B).
2007 Honda Element EX
2007-08 ENGINE Intake Manifold and Exhaust System - Element
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст