Honda Element. Manual — part 789
Fig. 17: TCS Control - Pressure Reducing Mode
Courtesy of AMERICAN HONDA MOTOR CO., INC.
VSA CONTROL
Pressure Intensifying Mode
VSA NO valve closed, VSA NC valve open, inlet valve open, outlet valve closed, pump motor ON.
The reservoir and master cylinder fluid is pumped out by the pump, through the damping chamber, to the front
and rear calipers.
Fig. 18: VSA Control - Pressure Intensifying Mode
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Pressure Retaining Mode
VSA NO valve closed, VSA NC valve open, inlet valve closed, outlet valve closed, pump motor ON.
Front and rear caliper fluid is retained by the inlet valve and outlet valve.
2007 Honda Element EX
2007-2008 BRAKES VSA (Vehicle Stability Assist) System Components - Element
Fig. 19: VSA Control - Pressure Retaining Mode
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Pressure Reducing Mode
VSA NO valve open, VSA NC valve closed, inlet valve closed, outlet valve open, pump motor ON.
Caliper fluid flows through the outlet valve to the reservoir.
Fig. 20: VSA Control - Pressure Reducing Mode
Courtesy of AMERICAN HONDA MOTOR CO., INC.
CIRCUIT DIAGRAM
2007 Honda Element EX
2007-2008 BRAKES VSA (Vehicle Stability Assist) System Components - Element
Fig. 21: VSA System Circuit Diagram (1 Of 3)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2007 Honda Element EX
2007-2008 BRAKES VSA (Vehicle Stability Assist) System Components - Element
Fig. 22: VSA System Circuit Diagram (2 Of 3)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2007 Honda Element EX
2007-2008 BRAKES VSA (Vehicle Stability Assist) System Components - Element
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст