Honda Insight (2019 year). Instruction — part 6
79
Instrument Panel
This chapter describes the buttons, indicators, and gauges that are used while driving.
Indicators . . . . . . . . . . . 80
Driver Information Interface Warning and
Information Messages. . . . . 102
Gauges and Driver Information Interface
Gauges. . . . . . . . . . . 128
Driver Information Interface . . . . 131
80
In
strum
e
nt Pa
nel
Indicators
Deceleration Paddle
Selector Indicator
P. 88
Parking Brake and
Brake System
Indicator (Red)
Parking Brake and
Brake System
Indicator (Amber)
U.S.
Canada
U.S.
Canada
Automatic Brake
Hold System Indicator
Automatic Brake Hold
Indicator
U.S.
Canada
*1 : When you set the power mode to ON, these indicators come on to indicate that system checks are being performed. They go off a few seconds later or after the power
system has started. If an indicator does not come on or turn off, there may be a malfunction in the corresponding system. To resolve the issue, follow the instructions in
the owner’s manual.
P. 81
*1
Malfunction Indicator
Lamp
12-Volt Battery
Charging System
Indicator
Anti-lock Brake System
(ABS) Indicator
Seat Belt Reminder
Indicator
Low Fuel Indicator
Vehicle Stability Assist
®
(VSA
®
) System Indicator
Vehicle Stability Assist
®
(VSA
®
) OFF Indicator
Supplemental Restraint
System Indicator
Auto High-Beam
Indicator
Low Tire Pressure/TPMS
Indicator
Electric Power Steering
(EPS) System Indicator
Turn Signal and Hazard
Warning Indicators
Lights On Indicator
High Beam Indicator
Fog Light Indicator
*
ECON Mode Indicator
System Message Indicator
SPORT Mode Indicator
Adaptive Cruise Control
(ACC) with Low Speed
Follow (LSF) Indicator
(Amber)
Lane Keeping Assist
System (LKAS) Indicator
(Amber)
Safety Support Indicator
(Amber)
Safety Support Indicator
(Green/Gray)
P. 82
P. 84
P. 84
P. 87
P. 88
*1
*1
*1
*1
P. 93
*1
*1
Shift Position Indicator
P. 88
Transmission System
Indicator
P. 89
P. 90
P. 90
P. 91
P. 91
P. 94
P. 92
*1
*1
*1
P. 92
*1
P. 91
P. 94
P. 97
*1
P. 94
P. 94
P. 96
P. 94
Immobilizer System
Indicator
P. 95
Security System Alarm
Indicator
P. 95
P. 96
P. 96
P. 98
P. 99
P. 101
*1
Adaptive Cruise Control
(ACC) with Low Speed
Follow (LSF) Indicator
(Green)
P. 98
*1
Lane Keeping Assist
System (LKAS) Indicator
(Green)
P. 98
*1
POWER SYSTEM
Indicator
P. 85
*1
READY Indicator
P. 86
EV Indicator
P. 86
*1
EV Mode Indicator
P. 86
*1
*1
* Not available on all models
81
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Parking Brake
and Brake
System
Indicator (Red)
• Comes on when the parking brake
is applied, and goes off when it is
released.
• Comes on when the brake fluid
level is low.
• Comes on if there is a problem with
the brake system.
• The beeper sounds and the
indicator comes on if you drive with
the parking brake not fully released.
• Comes on for about 30 seconds
when you pull or push the electric
parking brake switch when the
power mode is in ACCESSORY or
VEHICLE OFF.
• Stays on for about 30 seconds
when you set the power mode to
VEHICLE OFF while the electric
parking brake is set.
• Comes on while driving - Make sure
the parking brake is released. Check the
brake fluid level.
2 What to do when the indicator
• Comes on along with the brake system
indicator (amber) -Immediately stop in a
safe place. Contact a dealer for repair. The
brake pedal becomes harder to operate.
Depress the pedal further than you
normally do.
• Comes on along with the ABS
indicator - Have your vehicle checked by
a dealer.
2 If the Brake System Indicator (Red)
• Blinks and the brake system indicator
(amber) comes on at the same time -
There is a problem with the electric
parking brake system. The parking brake
may not be set.
Avoid using the parking brake and have
your vehicle checked by a dealer
immediately.
2 If the Brake System Indicator (Red)
Comes On or Blinks at the Same Time
When the Brake System Indicator
(Amber) Comes On P. 637
U.S.
Canada
(Red)
82
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Parking Brake
and Brake
System
Indicator
(Amber)
• Comes on if there is a problem with
a system related to braking other
than the conventional brake
system.
• Comes on if there is a problem with
the cooperative control with
regenerative braking, the electric
servo brake system, or the hill start
assist system.
• Comes on if there is a problem with
the electric parking brake system.
• Stays on constantly - Avoid high speeds
and sudden braking. Take the vehicle to a
dealer immediately.
• Comes on while driving - Avoid using
the parking brake and have your vehicle
checked by a dealer immediately.
●
Comes on if there is a problem with
the radar sensor.
●
Indicator may come on temporarily
when the Maximum Load Limit is
exceeded.
●
Make sure the total load is within the
Maximum Load Limit.
2 Maximum Load Limit P. 445
●
Stays on constantly - Have your vehicle
checked by a dealer.
U.S.
Canada
(Amber)
U.S.
Canada
83
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Parking Brake
and Brake
System
Indicator
(Amber)
• Comes on if there is a problem with
the automatic brake hold system.
2 Automatic Brake Hold P. 536
U.S.
Canada
(Amber)
U.S.
Canada
84
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Automatic
Brake Hold
System
Indicator
●
Comes on when the automatic
brake hold system is on.
2 Automatic Brake Hold P. 536
Automatic
Brake Hold
Indicator
●
Comes on when the automatic
brake hold is activated.
2 Automatic Brake Hold P. 536
—
U.S.
Canada
85
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
POWER
SYSTEM
Indicator
●
Comes on if there is a problem with
the electric vehicle system.
●
Comes on when the High Voltage
battery temperature becomes high.
●
Have your vehicle checked by a dealer.
86
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
READY
Indicator
●
Comes on when the vehicle is ready
to drive.
EV Indicator
●
Comes on when the vehicle is
moved by the motor, and the
engine is not operating.
—
—
EV Mode
Indicator
●
Comes on when the vehicle is in EV
mode.
87
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Malfunction
Indicator Lamp
• After you have set the power mode
to ON, the vehicle performs system
checks. However, if the readiness
codes have not been set by that
time, this indicator will blink five
times and then go off.
• Comes on if there is a problem with
the emissions control system.
• Blinks when a misfire in the
engine’s cylinders is detected.
• Comes on if the fuel fill cap is loose
or missing.
• Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 658
• Comes on while driving - Have your
vehicle checked by a dealer.
• Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the power system for 10
minutes or more, and wait for it to cool
down. Then, take your vehicle to a dealer.
2 If the Malfunction Indicator Lamp
• Comes on - Check the fuel cap before
taking your vehicle to a dealer.
88
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
12-Volt Battery
Charging
System
Indicator
• Comes on when the 12-volt battery
is not charging.
• Comes on while driving - Turn off the
climate control system and rear defogger
in order to reduce electricity consumption.
2 If the 12-Volt Battery Charging
System Indicator Comes On P. 634
Shift Position
Indicator
• Indicates the current shift position.
—
Deceleration
Paddle Selector
Indicator
• Comes on when the paddle selector
is pulled.
• Blinks when deceleration does not
occur while pulling the paddle
selector.
• Comes on with M when SPORT
mode is selected and pulling the
paddle selector.
2 Deceleration Paddle Selector P. 464
—
89
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Transmission
System
Indicator
• The current shift position blinks if
the transmission system has a
problem.
• Blinks while driving - Avoid sudden
starts and acceleration and have your
vehicle checked by a dealer immediately.
• The current shift position or all the
shift positions blink if there is a
problem with the transmission and
the vehicle is no longer able to run.
• Immediately park your car in a safe place.
2 Emergency Towing P. 648
• Have your vehicle checked by a dealer.
• The current shift position or all the
shift positions blink if there is a
problem with the transmission and
it is not possible to select
(
P.
• While the vehicle is stopped, apply the
parking brake.
• Have your vehicle checked by a dealer
immediately.
90
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Seat Belt
Reminder
Indicator
• Blinks and the beeper sounds for a
few seconds if you are not wearing
a seat belt when you set the power
mode to ON, then the indicator
comes on.
• If the front passenger is not
wearing a seat belt, the indicator
comes on a few seconds later.
• Blinks while driving if either you
and/or the front passenger has not
fastened a seat belt. The beeper
sounds and the indicator blinks at
regular intervals.
• The beeper stops and the indicator goes
off when you and the front passenger
fasten their seat belts.
• Stays on after you and/or the front
passenger has fastened the seat
belt(s) - A detection error may have
occurred in the sensor. Have your vehicle
checked by a dealer.
Low Fuel
Indicator
• Comes on when the fuel reserve is
running low (approximately 1.59
U.S. gal./6.0 Liter left).
• Blinks if there is a problem with the
fuel gauge.
• Comes on - Refuel your vehicle as soon
as possible.
• Blinks - Have your vehicle checked by a
dealer.
91
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Anti-lock Brake
System (ABS)
Indicator
• Comes on if there is a problem with
the ABS.
• Stays on constantly - Have your vehicle
checked by a dealer. With this indicator
on, your vehicle still has normal braking
ability but no anti-lock function.
2 Anti-lock Brake System (ABS) P. 539
Supplemental
Restraint
System
Indicator
• Comes on if a problem with any of
the following is detected:
- Supplemental restraint system
- Side airbag system
- Side curtain airbag system
- Seat belt tensioner
• Stays on constantly - Have your vehicle
checked by a dealer.
Electric Power
Steering (EPS)
System
Indicator
• Comes on if there is a problem with
the EPS system.
• Stays on constantly - Have your vehicle
checked by a dealer.
92
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Vehicle Stability
Assist® (VSA®)
System
Indicator
●
Blinks when VSA® is active.
●
Comes on if there is a problem with
the VSA® system.
●
Stays on constantly - Have your vehicle
checked by a dealer.
2 Vehicle Stability Assist® (VSA®), aka
Electronic Stability Control (ESC),
System P. 469
●
Comes on if the VSA® system is
deactivated temporarily after the
12-volt battery has been
disconnected, then re-connected.
●
Drive a short distance at more than 12
mph (20 km/h). The indicator should go
off. If it does not, have your vehicle
checked by a dealer.
Vehicle Stability
Assist® (VSA®)
OFF Indicator
●
Comes on when you partially
disable VSA®.
●
Comes on if the VSA® system is
deactivated temporarily after the
12-volt battery has been
disconnected, then re-connected.
●
Drive a short distance at more than 12
mph (20 km/h). The indicator should go
off. If it does not, have your vehicle
checked by a dealer.
93
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Low Tire
Pressure/TPMS
Indicator
●
May come on briefly if the power
mode is set to ON and the vehicle is
not moved within 45 seconds, to
indicate the calibration process is
not yet complete.
●
Comes on and stays on when:
- One or more tires’ pressures are
determined to be significantly low.
- The system has not been
calibrated.
●
Comes on while driving - Stop in a safe
place, check tire pressures, and inflate the
tire(s) if necessary.
●
Stays on after the tires are inflated to
the recommended pressures - The
system needs to be calibrated.
●
Blinks for about one minute, and
then stays on if there is a problem
with the TPMS, or when a compact
spare tire
*
is temporarily installed.
●
Blinks and remains on - Have your
vehicle checked by a dealer. If the vehicle
is fitted with a compact spare tire, get your
regular tire repaired or replaced and put
back on your vehicle as soon as you can.
●
Comes on if the TPMS is deactivated
temporarily after the 12-volt battery
has been disconnected, then re-
connected.
●
Drive a short distance at more than 12
mph (20 km/h). The indicator should go
off. If it does not, have your vehicle
checked by a dealer.
* Not available on all models
94
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Turn Signal and
Hazard
Warning
Indicators
• Blinks when you operate the turn
signal lever.
• Blink along with all turn signals
when you press the hazard warning
button.
• Does not blink or blinks rapidly
2 Replacing Light Bulbs P. 575
—
High Beam
Indicator
• Comes on when the high beam
headlights are on.
—
—
Lights On
Indicator
• Comes on when the light switch in
a position other than OFF or when
the switch is set to AUTO and the
exterior lights come on.
• If you set the power mode to VEHICLE OFF
while the lights are on, a chime sounds
when the driver’s door is opened.
—
Fog Light
Indicator
*
• Comes on when the fog lights are
on.
—
—
Auto High-
Beam Indicator
• Comes on when all the operating
conditions of the auto high-beam
are met.
—
* Not available on all models
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст