Honda CR-V (2022 year). Manual in english — page 33
526
uu
When Driving
u
Shifting
Driving
The manual transmission has a lockout mechanism that stops you from accidentally
shifting into
(
R
from a forward gear while the vehicle is moving above a certain
speed.
If you cannot shift to
(
R
when the vehicle is stopped, do the following:
1.
Depress the clutch pedal, move the shift
lever all the way to the left, and shift to
(
R
.
2.
If you still cannot shift into
(
R
, apply the
parking brake, and turn the ignition switch
to ACCESSORY
(
q
or LOCK
(
0
*1
.
3.
Depress the clutch pedal and shift into
(
R
.
4.
Keep depressing the clutch pedal and start
the engine.
Have the vehicle checked by a dealer if you
have to go through this procedure repeatedly.
*1: Models with the keyless access system have an
ENGINE START/STOP
button instead of an
ignition switch.
■
Reverse Lockout
527
uu
When Driving
u
ECON Mode
Driving
ECON Mode
The
ECON
button turns the ECON mode on and off.
The ECON mode helps you to improve your fuel economy by adjusting the
performance of the engine, transmission, and climate control system.
1
While in ECON mode, the climate control system has
greater temperature fluctuations.
528
uu
When Driving
u
Auto Idle Stop
Driving
Auto Idle Stop
To help maximise fuel economy, the engine automatically stops when the vehicle
comes to a stop, depending on environmental and vehicle operating conditions. The
indicator (green) comes on at this time. The engine then restarts once the vehicle is
about to move again, depending on environmental and vehicle conditions, and the
indicator (green) goes off.
2
The Engine Automatically Restarts When:
P. 531
The environmental and vehicle conditions that
impact Auto Idle Stop system operation are
varied.
2
Auto Idle Stop Activates When:
P. 530
If the driver’s door is opened while the
indicator (green) is on, a buzzer sounds to
notify you that Auto Idle Stop function is in
operation.
A message associated with Auto Idle Stop
appears on the driver information interface.
2
P. 98
2
P. 157, 408
Manual transmission models
1
The 12-volt battery installed in this vehicle is
specifically designed for a model with Auto Idle Stop.
Using a 12-volt battery other than this specified type
may shorten the 12-volt battery life, and prevent
Auto Idle Stop from activating. If you need to replace
the 12-volt battery, make sure to select the specified
type. Ask a dealer for more details.
2
P. 768
The duration of the Auto Idle Stop operation:
•
Increases
in the ECON mode, compared to when
the ECON mode is off, with climate control in use.
2
P. 527
Auto Idle Stop
Indicator (Green)
Continued
529
uu
When Driving
u
Auto Idle Stop
Driving
To turn the Auto Idle Stop system off, press
this button. The Auto Idle Stop system stops.
u
Auto Idle Stop system will stop and the
indicator (amber) will come on.
The Auto Idle Stop system is turned on every
time you start the engine, even if you turned it
off the last time you drove the vehicle.
■
Auto Idle Stop System ON/OFF
1
If you turn off the Auto Idle Stop system while it is
activated, the engine will restart.
Auto Idle Stop
Indicator (Amber)
uu
When Driving
u
Auto Idle Stop
530
Driving
After the vehicle moves forward, stopping with the brake, the clutch pedal fully
depressed, the shift lever in
(
N
, and then the clutch pedal is released.
u
To restart the engine automatically, depress the clutch pedal.
■
Auto Idle Stop does not activate when:
•
The Auto Idle Stop
OFF
button is pressed.
•
The driver’s seat belt is not fastened.
•
The engine coolant temperature is low or high.
•
The vehicle comes to a stop again before the vehicle speed reaches 3 km/h (2
mph) after the engine starts.
•
The shift lever is in any position except
(
N
.
•
The engine is started with the bonnet open.
u
Turn off the engine. Close the bonnet before you restart the engine to activate
Auto Idle Stop.
•
The battery charge is low.
•
The internal temperature of the battery is 5°C or less.
•
The climate control system is in use, and the outside temperature is below -20°C
or over 40°C.
•
The climate control system is in use, and the temperature is set to
Hi
or
Lo
.
•
is on (the indicator on).
■
Auto Idle Stop may not activate when:
•
The steering wheel is operated.
•
The fan speed is high.
•
The climate control system is in use, and there is a significant difference between
the set temperature and the actual interior temperature.
•
The climate control system is in use, and humidity in the interior is high.
■
Auto Idle Stop Activates When:
1
Auto Idle Stop Activates When:
Do not open a bonnet during idling stop. If the
bonnet is opened, the engine will not restart
automatically.
In this case, restart the engine with the ignition
switch or the
ENGINE START/STOP
button.
2
P. 510, 513
Pressing the
ENGINE START/STOP
button changes
the power mode to ACCESSORY even while Auto Idle
Stop is in operation. Once in ACCESSORY, the engine
no longer restarts automatically. Follow the standard
procedure to start the engine.
2
P. 513
Even if you turn the ignition switch to START
(
e
during the Auto Idle Stop activated, the engine does
not start.
Models with keyless access system
Models without keyless access system
531
uu
When Driving
u
Auto Idle Stop
Driving
•
The clutch pedal is depressed.
■
The engine automatically restarts even if the clutch pedal is not depressed
with the transmission in
(
N
when:
•
The Auto Idle Stop
OFF
button is pressed.
•
The steering wheel is operated.
•
Your vehicle is moved.
•
The brake pedal is released slightly during a stop.
•
The battery charge becomes low.
Fully depress the clutch pedal.
u
The engine automatically restarts.
■
The Engine Automatically Restarts When:
■
When Indicator Light (Green) Blinks in Auto Idle Stop
1
The Engine Automatically Restarts When:
If you are using an electronic device during Auto Idle
Stop, the device may temporarily be turned off when
the engine restarts.
The engine does not restart automatically when there
is a problem in the system. Follow the normal
procedure to start the engine.
2
P. 510, 513
During Auto Idle Stop, the engine does not restart
automatically if:
•
The driver’s seat belt is unlatched. To keep Auto
Idle Stop activated, fasten your seat belt
immediately.
•
The transmission is put into a position other than
(
N
. Put the transmission into
(
N
.
2
Driver Information Interface Warning
and Information Messages
When the system stops operating, follow the normal
procedure to start the engine.
2
P. 510, 513
1
When Indicator Light (Green) Blinks in Auto Idle Stop
The indicator starts blinking rapidly under the
following conditions:
•
is touched.
•
When the climate control system is in use and
moisture builds up inside the vehicle.
•
When the climate control system is in use and the
difference between the set temperature and the
actual temperature inside the vehicle becomes
significant.
532
uu
When Driving
u
Adjustable Speed Limiter
Driving
Adjustable Speed Limiter
This system enables you to set a maximum speed that cannot be exceeded even if
you are depressing the accelerator pedal.
The vehicle speed limit can be set from about 30 km/h (18 mph) to about 250 km/h
(156 mph).
1
The adjustable speed limiter may not hold the set
speed limit when driving downhill. If this occurs, slow
down by depressing the brake pedal.
When not using the adjustable speed limiter:
Turn off the adjustable speed limiter by pressing the
MAIN
button.
You cannot use the adjustable speed limiter and the
adaptive cruise control (ACC)
*
/adaptive cruise control
(ACC) with LSF
*
or intelligent speed limiter at the
same time.
When the engine speed slows down, try to
downshift.
3
WARNING
Adjustable Speed Limiter has limitations.
It is always your responsibility to adjust the
vehicle speed to obey the actual speed
limit, and safely operate the vehicle.
3
WARNING
Do not depress the accelerator pedal more
than necessary.
Maintain an appropriate accelerator pedal
position depending on the vehicle speed.
Manual transmission models
■
Press the
MAIN
button
on the steering wheel
The indicator is on in
the instrument panel
Adjustable speed limiter is
ready to use.
If a different indicator comes on,
press the
LIM
button to switch to
the adjustable speed limiter.
How to use
* Not available on all models
Continued
533
uu
When Driving
u
Adjustable Speed Limiter
Driving
•
Take your foot off the accelerator pedal and press the
–/SET
button when you
reach the desired speed.
The moment you release the
–/SET
button, the speed limit is fixed, and the
adjustable speed limiter is set. The speed limit is displayed.
•
You can set the previously set speed limit by pressing the
RES/+
button.
■
To Set the Speed Limit
1
If you set the speed limit while travelling at less than
30 km/h (18 mph), the speed limit is set to 30 km/h
(18 mph).
The beeper sounds and the displayed speed limit
blinks if the vehicle speed exceeds the limit by 3 km/h
(2 mph) or more on a steep descent.
The adjustable speed limiter is set to the current
speed if it is higher than the previously set speed limit
when you press the
RES/+
button.
You can switch the displayed set speed
measurements between km/h and mph on the driver
information interface.
2
P. 146
2
P. 157, 408
On when the
adjustable speed
limiter is set
Press and release
−/SET
Button
RES/+
Button
uu
When Driving
u
Adjustable Speed Limiter
534
Driving
Increase or decrease the speed limit by using the
RES/+
or
–/SET
buttons on the
steering wheel.
•
Each time you press the button, the speed limit increases or decreases by 1 km/h
or 1 mph accordingly.
•
If you keep the button pressed, the speed limit increases or decreases in
increments of 10 km/h or 10 mph every 0.5 second until system limit is reached.
•
The vehicle may accelerate or decelerate until the set speed is reached.
The speed limit can be exceeded by depressing the accelerator pedal completely.
u
The displayed limit speed blinks.
u
The beeper sounds once the speed limit has been exceeded.
■
To Adjust the Speed Limit
■
Exceeding the Speed Limit Temporarily
To decrease speed
To increase speed
1
Exceeding the Speed Limit Temporarily
The beeper sounds when the vehicle speed goes
higher than the set speed limit with the accelerator
pedal depressed completely.
The adjustable speed limiter resumes working once
the vehicle speed goes lower than the set speed limit.
535
uu
When Driving
u
Adjustable Speed Limiter
Driving
To cancel the adjustable speed limiter, do any
of the following:
•
Press the
CANCEL
button.
•
Press the
MAIN
button.
•
Press the
LIM
button.
■
To Cancel
1
The adjustable speed limiter changes into adaptive
cruise control (ACC)
*
/adaptive cruise control (ACC)
with LSF
*
or intelligent speed limiter if the
LIM
button
is pressed.
If there is a problem with the system when you are
using the adjustable speed limiter, the beeper sounds
and
OFF
comes on. The adjustable speed limiter will
be turned off.
CANCEL
Button
MAIN
Button
LIM
Button
* Not available on all models
536
uu
When Driving
u
Intelligent Speed Limiter
Driving
Intelligent Speed Limiter
Automatically sets the speed limit that the traffic sign recognition system detects.
And the speed limit cannot be exceeded even if you are depressing the accelerator
pedal. If you fully depress the accelerator the speed limit can be exceeded.
2
Traffic Sign Recognition System
1
Depending on the amount of depression of the
accelerator pedal, the vehicle will accelerate until it
reaches the speed identified by the traffic sign
recognition system.
3
WARNING
Intelligent Speed Limiter has limitations.
The Intelligent Speed Limiter may set itself
to a speed above or below the actual speed
limit, or may not work, particularly where
the traffic sign recognition system does not
operate correctly or where a road has no
speed limit signs. It is always your
responsibility to adjust the speed to obey
the actual speed limit and to safely operate
the vehicle.
Continued
537
uu
When Driving
u
Intelligent Speed Limiter
Driving
1
The system is designed to detect signs that follow the
Vienna Convention standards. Not all signs may be
detected, but any signs posted on roadsides should
not be ignored. The system does not work on the
designated traffic signs of all the countries you travel,
nor in all situations.
2
Traffic Sign Recognition System
P. 615
If the intelligent speed limiter is set to the wrong
speed limit, try one of the following:
To cancel
•
Press the
CANCEL
button.
•
Press the
MAIN
button.
•
Press the
LIM
button.
To exceed the speed limit temporarily
•
Depress the accelerator pedal fully.
The intelligent speed limiter may not hold the set
speed limit when driving downhill. If this occurs, slow
down by depressing the brake pedal.
When not using the intelligent speed limiter, turn off
the intelligent speed limiter by pressing the
MAIN
button.
You cannot use the intelligent speed limiter and
adaptive cruise control (ACC)
*
/adaptive cruise control
(ACC) with LSF
*
or adjustable speed limiter at the
same time.
How to use
The indicator is on in
the instrument panel
Intelligent speed limiter is
ready to use.
■
Press the
MAIN
button
on the steering wheel
If a different indicator comes on,
press the
LIM
button to change it to
the intelligent speed limiter.
* Not available on all models
uu
When Driving
u
Intelligent Speed Limiter
538
Driving
•
The moment you release the
–/SET
button or
RES/+
button, the intelligent speed
limiter is set to the speed limit that the traffic sign recognition system detects. The
speed limit is displayed.
■
To Set the Speed Limit
1
When the engine speed slows down, try to
downshift.
Do not use the intelligent speed limiter in areas of
different units from the display unit of the intelligent
speed limiter.
Change the displayed measurement of the set vehicle
speed to the same units as the driving areas.
2
P. 146
2
P. 157, 408
Manual transmission models
1
If you set the intelligent speed limiter when the speed
limit that the traffic sign recognition system detects is
less than 30 km/h (20 mph), the speed limitation
function and warning function may switch to pause.
If your vehicle speed is higher than the speed limit
that the traffic sign recognition system detects, your
vehicle decelerates slowly to the speed limit or less. If
necessary, slow down by depressing the brake pedal.
And the beeper sounds and the displayed speed limit
blinks if the vehicle speed exceeds the limit by 3 km/h
(2 mph) or more.
On when the intelligent speed
limiter is set to the speed limit
that the traffic sign
recognition system detects.
Press and release
−/SET
Button
RES/+
Button
Continued
539
uu
When Driving
u
Intelligent Speed Limiter
Driving
■
When the traffic sign recognition system detects the new speed limit sign
The intelligent speed limiter is set to the new speed limit that the traffic sign
recognition system detects.
■
The speed limitation function and warning function may switch to pause
if there is no speed limit sign in the screen of the traffic sign recognition
system when:
•
The end of speed limit or other designated limit is detected.
•
Your vehicle enters/exits motorway or highway.
•
You make a turn with a turn signal at an intersection.
1
The intelligent speed limiter may also switch to pause
when the traffic sign recognition system detects only
additional speed limit signs.
540
uu
When Driving
u
Intelligent Speed Limiter
Driving
■
When the traffic sign recognition system detects the speed limit sign
while the intelligent speed limiter is paused
The speed limitation function and warning function will be resumed automatically.
■
When the traffic sign recognition system does not detect the speed limit
sign for a time while the intelligent speed limiter is activated
While driving, in addition to when the traffic sign recognition system detects no
speed limit sign, the traffic sign recognition system may display no speed limit.
But, intelligent speed limiter functions continue.
Continued
541
uu
When Driving
u
Intelligent Speed Limiter
Driving
Increase or decrease the speed limit by using the
RES/+
or
–/SET
buttons on the
steering wheel.
•
Each time you press the button, the speed limit is increased or decreased by about
1 km/h or 1 mph accordingly.
•
You can increase the speed limit up to +10 km/h or +5 mph on the basis of the
speed limit that the traffic sign recognition system detects.
•
You can decrease the speed limit up to -10 km/h or -5 mph on the basis of the
speed limit that the traffic sign recognition system detects.
•
You can accelerate until the set speed is reached. If your vehicle speed is higher
than the speed limit that the traffic sign recognition system detects, your vehicle
decelerates slowly to the speed limit.
The speed limit can be exceeded by depressing the accelerator pedal fully.
u
The displayed speed limit blinks.
The beeper sounds once the speed limit has been exceeded.
■
To Adjust the Speed Limit
1
A negative or positive offset with respect to the
speed limit will be reset automatically when the
traffic sign recognition system detects a new speed
limit sign.
You cannot decrease the speed limit to less than 30
km/h (18 mph).
■
Exceeding the Speed Limit Temporarily
To decrease speed
To increase speed
1
Exceeding the Speed Limit Temporarily
The beeper sounds when the vehicle speed goes
higher than the set speed limit with the accelerator
pedal depressed completely.
The intelligent speed limiter resumes working once
the vehicle speed goes lower than the set speed limit.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст