Honda HR-V eHEV (2022 year). Manual in english — page 23
369
uu
When Driving
u
Deceleration Paddle Selector
Driving
■
Common operations
To select the different stages of deceleration:
•
Pull back the
(
+
selector (right side) to decrease the deceleration stage.
•
Pull back the
(
-
selector (left side) to increase the deceleration stage.
Each paddle selector operation makes a single
stage deceleration change.
u
The deceleration stage may not change if
you keep the paddle selector pulled
back.
a
Deceleration Stage
b
Decrease
c
Increase
370
uu
When Driving
u
Acoustic Vehicle Alerting System
Driving
Acoustic Vehicle Alerting System
Alerts pedestrians when a vehicle is propelled solely by electricity, approaching at
speeds around 25 km/h (16 mph) or less.
371
uu
When Driving
u
Drive Mode Switch
Continued
Driving
Drive Mode Switch
Continuously controls your vehicle’s driving performance according to the mode you
select.
You can choose between three modes,
SPORT
mode,
NORMAL
mode and
ECON
mode, by moving the drive mode switch forward or back.
The currently selected mode is displayed on the driver information interface, and the
display will change for each mode.
1
NORMAL
mode is selected automatically every time
you set the power mode to ON. However, if
ECON
mode was selected the last time you drove the
vehicle,
ECON
mode will be selected when the
power mode is set to ON.
The mode may not be able to be changed under
some driving conditions.
If there is a vehicle system failure, the following
message will also appear on the driver information
interface, and you cannot select any other mode.
a
SPORT
Mode
b
NORMAL
Mode
c
ECON
Mode
d
Drive Mode Switch
372
uu
When Driving
u
Drive Mode Switch
Driving
This mode enhances the responsiveness of the
acceleration.
This mode optimizes the balance between
operability and comfort.
■
SPORT Mode
■
NORMAL Mode
373
uu
When Driving
u
Drive Mode Switch
Driving
This mode facilitates fuel-efficient driving.
■
ECON Mode
1
While in
ECON
mode, the climate control system will
be less effective and the vehicle slower to accelerate.
374
uu
When Driving
u
Hill Descent Control System
Driving
Hill Descent Control System
When driving down hills where engine braking is not enough to decelerate the
vehicle, this system helps maintain a constant vehicle speed without needing to
depress the brake pedal.
The system operates under the following conditions.
•
Driving at a speed between about 3-20 km/h (2-12 mph).
•
Driving downhill.
•
Accelerator pedal and brake pedal are not depressed.
■
Hill Descent Control Operating Conditions
■
Driver information interface display
1
The brake lights automatically come on while the
system is in operation.
The system may not operate when driving down a
gentle slope. Check the Hill Descent Control indicator
to see if the system is in operation.
The system may activate even when not driving
downhill, such as when the vehicle leans while
driving over uneven surfaces.
3
WARNING
Hill descent control cannot maintain a
constant vehicle speed in every situation.
When driving down a very steep hill or on
slippery road surfaces, the vehicle may not
be able to maintain the vehicle speed and
could cause a crash, resulting in serious
injury or death.
Since Hill Descent Control is not designed
to increase the limits of vehicle
performance, the driver must always be
aware of road surface conditions and drive
safely.
a
The system’s operating status
•
Green: Activated
•
White: Standby
b
Vehicle speed display
•
White: Set speed
•
Grey: Current speed
u
Blinks when the vehicle speed is
above the operating speed.
c
Current speed
d
Operating range of set speed
375
uu
When Driving
u
Hill Descent Control System
Driving
■
To turn the system on
When the vehicle speed is less than about 20
km/h (12 mph), press the
button to turn
the system on.
u
The system goes into standby mode, and
the Hill Descent Control indicator (white)
comes on.
When all the working conditions are met, the
system activates, and the vehicle begins to
maintain the vehicle speed when driving
downhill.
u
The Hill Descent Control indicator (green)
comes on when operating.
■
To adjust the set speed
Depress the accelerator pedal or brake pedal
to adjust the vehicle speed within the
operating range. The vehicle speed at which
you release the accelerator pedal or brake
pedal will be the set speed.
■
To turn the system off
Press the
button to turn the system off.
■
How to Operate Hill Descent Control
1
How to Operate Hill Descent Control
Using the system repeatedly for a long time may
cause the brakes to heat up and make the system go
into standby mode temporarily.
Hill Descent Control is turned off every time you turn
the power system off, even if it was turned on the last
time you drove the vehicle.
The pedals may vibrate or you may hear the system
working when in operation.
a
Hill Descent Control Indicator
b
(Hill Descent Control)
Button
1
When the vehicle speed is 60 km/h (37 mph) or more,
the system turns off automatically.
376
uu
When Driving
u
Adjustable Speed Limiter
Driving
Adjustable Speed Limiter
This system enables you to set a maximum speed that cannot be exceeded even if
you are depressing the accelerator pedal.
The vehicle speed limit can be set from about 30 km/h (18 mph) to about 250 km/h
(156 mph).
1
The adjustable speed limiter may not hold the set
speed limit when driving downhill. If this occurs, slow
down by depressing the brake pedal.
When not using the adjustable speed limiter:
Turn off the adjustable speed limiter by pressing the
button.
You cannot use the Adjustable Speed Limiter and
below systems at the same time.
-
Adaptive cruise control (ACC) with low speed follow
-
Intelligent speed limiter
3
WARNING
Adjustable Speed Limiter has limitations.
It is always your responsibility to adjust the
vehicle speed to obey the actual speed
limit, and safely operate the vehicle.
3
WARNING
Do not depress the accelerator pedal more
than necessary.
Maintain an appropriate accelerator pedal
position depending on the vehicle speed.
a
Press the
button on the steering wheel.
b
If a different indicator comes on, press the
LIM
button to switch to the adjustable
speed limiter.
c
The Adjustable Speed Limiter Indicator (White) is on in the gauge.
Adjustable speed limiter is ready to use.
Continued
377
uu
When Driving
u
Adjustable Speed Limiter
Driving
•
Take your foot off the pedal and press the
SET/−
button when you reach the
desired speed.
The moment you release the
SET/−
button, the speed limit is fixed, and the
adjustable speed limiter is set. The speed limit is displayed.
•
You can set the previously set speed limit by pressing the
RES/+
button.
■
To Set the Speed Limit
1
If you set the speed limit while travelling at less than
30 km/h (18 mph), the speed limit is set to 30 km/h
(18 mph).
The beeper sounds and the displayed speed limit
blinks if the vehicle speed exceeds the limit by 3 km/h
(2 mph) or more on a steep descent.
The adjustable speed limiter is set to the current
speed if it is higher than the previously set speed limit
when you press the
RES/+
button.
You can switch the displayed set speed
measurements between km/h and mph on the audio/
information screen.
2
P. 305
a
RES/+
Button
b
SET/−
Button
c
On when the adjustable speed limiter is set.
d
Adjustable Speed Limiter Indicator (Green)
378
uu
When Driving
u
Adjustable Speed Limiter
Driving
Increase or decrease the speed limit by using the
RES/+
or
SET/−
buttons on the
steering wheel.
•
Each time you press the button, the speed limit increases or decreases by 1 km/h
or 1 mph accordingly.
•
If you keep the button pressed, the speed limit increases or decreases in
increments of 10 km/h or 10 mph every 0.5 second until system limit is reached.
•
The vehicle may accelerate or decelerate until the set speed is reached.
■
To Adjust the Speed Limit
a
To increase speed
b
To decrease speed
Continued
379
uu
When Driving
u
Adjustable Speed Limiter
Driving
The speed limit can be exceeded by depressing the accelerator pedal completely.
u
The displayed limit speed blinks.
u
The beeper sounds once the speed limit has been exceeded.
■
Exceeding the Speed Limit Temporarily
1
Exceeding the Speed Limit Temporarily
The beeper sounds when the vehicle speed goes
higher than the set speed limit with the accelerator
pedal depressed completely.
The adjustable speed limiter resumes working once
the vehicle speed goes lower than the set speed limit.
uu
When Driving
u
Adjustable Speed Limiter
380
Driving
To cancel the adjustable speed limiter, do any
of the following:
•
Press the
CANCEL
button.
•
Press the
button.
•
Press the
LIM
button.
■
To Cancel
1
The adjustable speed limiter changes into adaptive
cruise control (ACC) with Low Speed Follow or
intelligent speed limiter if the
LIM
button is pressed.
Resuming the prior set speed:
Press the
CANCEL
button to display the prior set
speed (gray) and press the
RES/+
button to resume
the prior set speed.
If you are driving at a speed faster than the prior set
speed (gray), the adjustable speed limiter is set to the
displayed speed by pressing the
RES/+
button.
If you press the
RES/+
button when no prior set
speed (in gray) is displayed, the speed will be set to
your vehicle’s current speed.
a
Adjustable Speed Limiter Indicator
(White)
b
Prior Set Speed (Gray)
a
LIM
Button
b
CANCEL
Button
c
Button
381
uu
When Driving
u
Adjustable Speed Limiter
Driving
1
If there is a problem with the system when you are using
the adjustable speed limiter, the beeper sounds and
OFF
comes on. The adjustable speed limiter will be turned off.
a
Adjustable Speed Limiter Indicator
(White)
382
uu
When Driving
u
Intelligent Speed Limiter
Driving
Intelligent Speed Limiter
Automatically sets the speed limit that the traffic sign recognition system detects.
And the speed limit cannot be exceeded even if you are depressing the accelerator
pedal. If you fully depress the accelerator the speed limit can be exceeded.
2
Traffic Sign Recognition System
1
Depending on the amount of depression of the
accelerator pedal, the vehicle will accelerate until it
reaches the speed identified by the traffic sign
recognition system.
3
WARNING
Intelligent Speed Limiter has limitations.
The Intelligent Speed Limiter may set itself
to a speed above or below the actual speed
limit, or may not work, particularly where
the traffic sign recognition system does not
operate correctly or where a road has no
speed limit signs. It is always your
responsibility to adjust the speed to obey
the actual speed limit and to safely operate
the vehicle.
Continued
383
uu
When Driving
u
Intelligent Speed Limiter
Driving
1
The system is designed to detect signs that follow the
Vienna Convention standards. Not all signs may be
detected, but any signs posted on roadsides should
not be ignored. The system does not work on the
designated traffic signs of all the countries you travel,
nor in all situations.
2
Traffic Sign Recognition System
P. 461
If the intelligent speed limiter is set to the wrong
speed limit, try one of the following:
To cancel
•
Press the
CANCEL
button.
•
Press the
button.
•
Press the
LIM
button.
To exceed the speed limit temporarily
•
Depressing the accelerator pedal fully.
The intelligent speed limiter may not hold the set
speed limit when driving downhill. If this occurs, slow
down by depressing the brake pedal.
When not using the intelligent speed limiter, turn off
the intelligent speed limiter by pressing the
button.
You cannot use the intelligent speed limiter and
adaptive cruise control (ACC) with Low Speed Follow
or adjustable speed limiter at the same time.
a
Press the
button on the steering wheel.
b
If a different indicator comes on, press the
LIM
button to change it to the
intelligent speed limiter.
c
The Intelligent Speed Limiter Indicator (White) is on in the gauge.
Intelligent speed limiter is ready to use.
uu
When Driving
u
Intelligent Speed Limiter
384
Driving
•
The moment you release the
SET/−
button or
RES/+
button, the intelligent speed
limiter is set to the speed limit that the traffic sign recognition system detects. The
speed limit is displayed.
■
To Set the Speed Limit
1
Do not use the intelligent speed limiter in areas of
different units from the display unit of the intelligent
speed limiter.
Change the displayed measurement of the set vehicle
speed to the same units as the driving areas.
2
P. 305
1
If you set the intelligent speed limiter when the speed
limit that the traffic sign recognition system detects is
less than 30 km/h (20 mph), the speed limitation
function and warning function may switch to pause.
If your vehicle speed is higher than the speed limit
that the traffic sign recognition system detects, your
vehicle decelerates slowly to the speed limit or less. If
necessary, slow down by depressing the brake pedal.
And the beeper sounds and the displayed speed limit
blinks if the vehicle speed exceeds the limit by 3 km/h
(2 mph) or more.
a
RES/+
Button
b
SET/−
Button
c
On when the intelligent speed limiter is set to the speed limit that the traffic sign
recognition system detects.
d
Intelligent Speed Limiter Indicator (Green)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст