Honda HR-V eHEV (2022 year). Manual in english — page 15
Continued
239
uu
Climate Control System
u
Using Automatic Climate Control
Co
ntrols
Pressing the
button turns the air
conditioning system on and automatically
switches the system to fresh air mode.
Press the
button again to turn off, the
system returns to the previous settings.
■
Defrosting the Windscreen and Windows
1
Defrosting the Windscreen and Windows
For your safety, make sure you have a clear view
through all the windows before driving.
Do not set the temperature near the upper or lower
limit.
When cold air hits the windscreen, the outside of the
windscreen may fog up.
Models without SYNC button
Models with SYNC button
uu
Climate Control System
u
Using Automatic Climate Control
240
Co
ntrols
■
To rapidly defrost the windows
1.
Press the
button.
2.
Press the
button (indicator on).
Models without SYNC button
Models with SYNC button
1
To rapidly defrost the windows
After defrosting the windows, switch over to fresh air
mode. If you keep the system in recirculation mode,
the windows may fog up from humidity. This
impedes visibility.
Continued
241
uu
Climate Control System
u
Using Automatic Climate Control
Co
ntrols
You can set the temperature synchronously for the driver’s side and the passenger’s
side in synchronization mode.
1.
Press the
SYNC
button.
u
The system switches to synchronization mode.
2.
Adjust the temperature using the driver’s side temperature control dial.
Press the
SYNC
button to return to dual mode.
■
Synchronization Mode
*
1
When you press the
button, the system changes
to synchronization mode.
When the system is in synchronization mode, the
driver’s side temperature and the passenger’s side
temperature can not be set separately.
a
SYNC
button
b
Driver’s Side Temperature Control Dial
c
Passenger’s Side Temperature Control Dial
* Not available on all models
242
uu
Climate Control System
u
Using Automatic Climate Control
Co
ntrols
You can select the desired air outlet by turning the dial to the respective position.
selects outlet
b
.
selects outlet
c
.
selects blockage of both
b
and
c
.
■
Selecting the Desired Air Outlet
a
Dial
b
Air Outlet
c
Air Outlet
243
uu
Climate Control System
u
Automatic Climate Control Sensors
Co
ntrols
Automatic Climate Control Sensors
The automatic climate control system is
equipped with sensors. Do not cover or spill
any liquid on them.
245
Features
This chapter describes how to operate technology features.
246
Features
Audio System
About Your Audio System
The audio system features FM/AM radio and Digital Audio Broadcasting (DAB)
service. It can also play USB flash drives, iPod, iPhone,
Bluetooth
®
devices, and
smartphone.
You can operate the audio system from the buttons and knobs on the panel, the
remote controls on the steering wheel or the icons on the touchscreen interface.
1
iPod
®
, iPhone
®
and iTunes
®
are trademarks of Apple
Inc.
a
Remote Controls
b
iPod
c
USB Flash Drive
247
uu
Audio System
u
Audio System Theft Protection
Features
Audio System Theft Protection
The audio system is disabled when it is disconnected from the power source, such as
when the 12-volt battery is disconnected or goes dead. In certain conditions, the
system may display a code entry screen. If this occurs, reactivate the audio system.
■
Reactivating the audio system
1.
Set the power mode to ON.
2.
Turn on the audio system.
3.
Press and hold the audio system power button for more than two seconds.
u
The audio system is reactivated when the audio control unit establishes a
connection with the vehicle control unit. If the control unit fails to recognise
the audio unit, you must go to a dealer and have the audio unit checked.
248
Features
Display Audio
Start Up
The Display Audio starts automatically when you set the power mode to
ACCESSORY or ON. At start-up, the following screen about the data upload will be
displayed.
Select
Start
.
u
If you want to change the settings for
data upload, select
Settings
, then select
the ON/OFF settings on the
Location
and vehicle data sharing
screen.
u
If you do not select
Start
, the system will
automatically be switched the home
screen after a certain period of time.
u
If there is no registered device, select
Start
and the
Bluetooth
®
pairing screen
will be displayed.
■
To pair a mobile phone (when there is
no phone paired to the system)
1.
Make sure your phone is in search or
discoverable mode.
2.
Select
Honda HFT
from your phone.
u
If you want to pair a phone from this
Display Audio, select
Search for
Devices
, and then select your phone
when it appears on the list.
u
If you check the box with
Do not show
this again
, this screen will not be
displayed.
1
Location and vehicle data sharing
ON
: Available the data communication.
OFF
: Not available the data communication.
249
uu
Display Audio
u
Basic Operation
Continued
Features
Basic Operation
To use the audio system function, the power mode must be in ACCESSORY or ON.
■
Audio System Function
1
This screen is shown for the left-hand drive models.
For the right-hand drive models, these are located at
the symmetrically opposite to the left-hand drive
model.
a
All Apps
f
Mode Change Switch Icons
b
Status Icons
g
/
(Seek/Skip) Buttons
c
App Shortcut Icons
h
VOL
/
AUDIO
(Volume/Power)
Knob
d
Arrow
i
(Back) Button
e
Display Mode
Icon
j
(Home) Button
250
uu
Display Audio
u
Basic Operation
Features
All Apps
: Displays the all apps.
Status Icons
: Show the indicators of the information for the vehicle, connected
phones, etc. in the header area.
App Shortcut Icons
: Display the app shortcut icons.
Arrow
: Displays the next pages on the audio/information screen.
Display Mode
Icon
: Changes the audio/information screen brightness. Select
once and select
or
to make an adjustment.
Mode Change Switch Icons
: Display icons to change the mode directly.
/
(Seek/Skip)
Buttons
: Press to change station, song or file.
VOL
/
AUDIO
(Volume/Power) Knob
: Turns the audio system on and off and
turns to adjust the volume.
(Back) Button
: Presses to go to back to the previous screen.
(Home) Button
: Presses to go to the home screen.
Continued
251
uu
Display Audio
u
Basic Operation
Features
■
On the front panel (
)
The USB port (2.5A) on the front panel is for
charging devices, playing audio files and
connecting compatible phones with Apple
CarPlay or Android Auto.
u
To prevent any potential issues, be sure
to use an Apple MFi Certified Lightning
Connector for Apple CarPlay, and for
Android Auto, the USB cables should be
certified by USB-IF to be compliant with
USB 2.0 Standard.
■
On the front panel (
)
The USB port (2.5A) on the front panel is only
for charging devices.
u
You cannot play music even if you have
connected music players to it.
■
On the back of the console
compartment
*
The USB ports (2.5A) are only for charging
devices.
u
You cannot play music even if you have
connected music players to them.
■
USB Ports
1
•
Do not leave the iPod or USB flash drive in the
vehicle. Direct sunlight and high temperatures may
damage it.
•
We recommend that you use a USB cable if you are
attaching a USB flash drive to the USB port.
•
Do not connect the iPod or USB flash drive using a
hub.
•
Do not use a device such as a card reader or hard
disk drive, as the device or your files may be
damaged.
•
We recommend backing up your data before using
the device in your vehicle.
•
Displayed messages may vary depending on the
device model and software version.
The USB port can supply up to 2.5A of power. It does
not output 2.5A unless requested by the device.
For amperage details, read the operating manual of
the device that needs to be charged.
Under certain conditions, a device connected to the
port may generate noise to the radio station you are
listening to.
USB charge
On the front panel
a
Playing audio files and
connecting compatible phones
b
Only for charging devices
On the back of the console
compartment
*
* Not available on all models
uu
Display Audio
u
Basic Operation
252
Features
Allow you to operate the audio system while
driving. The information is shown on the
driver information interface.
VOL
(
+
/VOL
(
-
(Volume) Buttons
Press VOL
(
+
:
To increase the volume.
Press VOL
(
-
:
To decrease the volume.
Left Selector Wheel
•
When selecting the audio mode
Press the
(home) button, then roll up or down to select
(audio) on the driver
information interface, and then press the left selector wheel.
■
Audio Remote Controls
1
Some modes appear only when an appropriate
device or medium is used.
Depending on the
Bluetooth
®
device you connect,
some functions may not be available.
Press the
(back) button for the driver
information interface to go back to the previous
screen or cancel a command.
Press the
(home) button to go back to the home
screen of the driver information interface.
a
VOL
(
+
/
VOL
(
-
(Volume) Buttons
b
Left Selector Wheel
c
(Home) Button
d
/
(Seek/Skip) Buttons
e
(Back) Button
253
uu
Display Audio
u
Basic Operation
Features
Roll up or down:
To cycle through the audio modes, roll up or down and then press the left selector
wheel:
FM/AM/DAB/iPod/USB/Apple CarPlay/Android Auto/
Bluetooth
®
Audio
u
Depending on a connected device, the displayed modes may be changed.
/
(Seek/Skip) Buttons
•
When listening to the radio
Press :
To select the next preset radio station.
Press :
To select the previous preset radio station.
Press and hold
:
To select the next strong station.
Press and hold
:
To select the previous strong station.
•
When listening to an iPod, USB flash drive,
Bluetooth
®
Audio, or Smartphone
Connection
u
Depending on a connected device, operations may be changed.
Press :
To skip to the next song.
Press :
To go back to the previous song.
•
When listening to a USB flash drive
Press and hold
:
To skip to the next folder.
Press and hold
:
To go back to the previous folder.
•
When listening to an iPod:
Press and hold
:
To skip to the next song.
Press and hold
:
To go back to the previous song.
254
uu
Display Audio
u
On-Board Owner’s Manual
*
Features
On-Board Owner’s Manual
*
You can view the content of the owner's manual on the Display Audio.
1.
Select
All Apps
.
2.
Select
Owner’s Manual
.
When you can install or update the owner's manual, the notification will be sent
automatically.
To update:
1.
Tap the notification.
u
The version screen will display.
2.
Select items to be updated.
3.
Tap
Update
.
If you unselect an item on the version screen, you will not receive any notifications
for it.
■
Open the Owner’s Manual
■
Install/Update the Owner’s Manual
1
This function does not cover all languages available
for the Display Audio.
Changing the language of the Display Audio will also
change the language of the owner’s manual. If the
owner’s manual is not available or installed in that
language, the owner’s manual will default to English.
1
Install/Update the Owner’s Manual
There may be differences in the displayed content
depending on the version of the owner’s manual.
If the owner’s manual is not installed yet, you can
install it via Wi-Fi.
2
P. 295
If you install the owner’s manual in a new language,
the owner’s manual you previously downloaded will
be removed.
For languages except English, Germany, French,
Italian and Spanish
* Not available on all models
255
uu
Display Audio
u
Voice Control Operation
*
,
*
1
Continued
Features
Voice Control Operation
*
, *1
Your vehicle has a voice control system that allows hands-free operation.
The voice control system uses the
(talk) and
(back) buttons on the steering
wheel and a microphone near the map lights on the ceiling.
To achieve optimum voice recognition when using the voice control system:
•
Make sure the correct screen is displayed for the voice command that you are
using.
The system recognises only certain commands.
Available voice commands.
2
•
Close the windows.
•
Adjust the dashboard and side vents so air does not blow onto the microphone
on the ceiling.
•
Speak clearly in a clear, natural speaking voice without pausing between words.
•
Reduce any background noise if possible. The system may misinterpret your
command if more than one person is speaking at the same time.
*1: Languages that the voice control system recognises are English, German, French, Spanish,
and Italian.
■
Voice Recognition
1
When you press the
button, a helpful prompt asks
what you would like to do. Press and release the
button again to bypass this prompt and give a
command.
* Not available on all models
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст