Honda Insight (2022 year). Manual in english — page 7
108
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears if there is a problem with the automatic
lighting control system.
•
Appears while driving
- Manually turn the lights on,
and have your vehicle checked by a dealer.
•
Appears if there is a problem with the headlights.
•
Appears while driving
- The headlights may not be
on. When conditions allow you to drive safety, have
your vehicle checked by a dealer as soon as possible.
●
Appears when the automatic brake hold system is
turned off.
2
●
Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.
●
Fasten the driver’s seat belt.
2
109
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
ent Pa
nel
Message
Condition
Explanation
●
Appears when the automatic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.
●
Press the automatic brake hold button with the brake
pedal depressed.
2
●
Appears when the parking brake is applied
automatically while it is in operation.
2
2
●
Appears if the automatic brake hold is automatically
canceled while it is in operation.
●
Immediately depress the brake pedal.
●
Appears when the electric parking brake switch is
pressed without depressing the brake pedal while
the electric parking brake is in operation.
●
Press the electric parking brake switch with the brake
pedal depressed.
2
110
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
●
Appears when the power mode is in ACCESSORY.
—
●
Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
●
Change the power mode to VEHICLE OFF.
2
●
Appears when you close the door with the power
mode in ON without the keyless remote inside the
vehicle.
●
Disappears when you bring the keyless remote back
inside the vehicle and close the door.
2
●
Appears when the keyless remote battery becomes
weak.
2
111
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
ent Pa
nel
Message
Condition
Explanation
●
Appears if the keyless remote battery is too weak to
turn on the power system or the key is not within
operating range to turn on the power system.
A beeper sounds six times.
●
Bring the back of the keyless remote into contact with
the
POWER
button.
2
If the Keyless Remote Battery is Weak
●
Appears as soon as a problem is detected in the
keyless access system (smart entry system) or push
button starting system.
●
Appears constantly
- Have your vehicle checked by a
dealer.
●
Appears after you set the power mode to
ACCESSORY or ON.
2
•
Appears if you press the
POWER
button while the
vehicle is moving.
•
The message will disappear after six seconds or when
the power mode is set to VEHICLE OFF.
112
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears when the power system temperature is low.
•
Your vehicle has less ability to accelerate and may be
harder to start moving on an incline.
•
Disappears once you start driving as the High Voltage
battery warms up.
•
Appears when the power system temperature is
high.
•
Your vehicle has less ability to accelerate and may be
harder to start moving on an incline.
•
Park in a safe place, and cool the system down.
2
•
Appears if the power system is in diagnostic mode.
•
You may notice a decrease in available power. Have
your vehicle checked by a dealer.
•
Appears if there is a problem with the acoustic
vehicle alerting system.
•
Have your vehicle checked by a dealer immediately.
113
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears when you press the fuel fill door release
button.
•
The display changes to Ready when the fuel vapor
pressure inside the fuel tank is released. You can start
refueling once Ready appears.
2
•
Appears when the vehicle is ready to be refueled.
•
Appears when the high voltage battery and other
system control temperatures are too low to operate
(approx. –40°F or below).
•
You must wait for an increase in the ambient
temperature or move the vehicle to a warmer location.
•
Consult a dealer if necessary.
•
Appears when the high voltage battery temperature
is too low to operate (approx. −22°F or below).
•
You can start the power system and use the climate
control system to warm up the interior, which will also
warm the High Voltage battery enough for you to drive
the vehicle.
114
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears when the high voltage battery charge is
running extremely low.
•
Contact a dealer immediately.
115
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears when you failed to select EV mode or EV
mode is automatically canceled.
•
The cause may be shown with the following
message:
-
Battery Temperature At Limit.
-
Battery Charge Too Low.
-
Engine Too Cold.
-
Cabin Being Heated.
-
Speed Too High.
-
Hard Acceleration Requested.
•
EV mode is available once the condition is improved or
the cause that canceled EV mode is cleared.
•
Appears when EV mode has been automatically
canceled.
2
P. 14
•
Appears if the engine needs to be started when you
press the
EV
button.
—
116
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears when you try to change the shift position
without releasing your foot off the accelerator pedal.
•
Release your foot off the accelerator pedal, then select
a shift button.
•
Appears when the
(
P
button is pressed while the
vehicle is moving.
•
Appears if you put the transmission into
(
R
while
the vehicle is moving forward, or into
(
D
while the
vehicle is reversing.
•
Make sure that the vehicle comes to a stop before
operating the select button.
•
Appears when you set the power mode to ON
without fastening the driver’s seat belt.
•
Appears when you change the shift position after
(
P
has been automatically selected with the driver’s
door open, the driver’s seat belt unfastened, then
the brake pedal is released.
•
Fasten the seat belt properly before you start to drive.
2
P. 393
•
Appears when you try to change the shift position
without depressing the brake pedal.
•
Depress the brake pedal, then select a shift button.
117
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears when you set the power mode to OFF while
driving.
•
Immediately stop in a safe place, set the parking brake,
then restart the power system. If the message
disappears, continue driving.
•
Appears if the vehicle is stopped and the driver’s seat
belt is unfastened, as there is a possibility that the
vehicle may roll.
•
When the power system is ON or when you are parking
or exiting the vehicle, put the transmission into
(
P
before releasing the brake pedal.
2
•
Appears if you depress the accelerator pedal when
the transmission is in
(
N
.
•
Release the accelerator pedal. After that, depress the
brake pedal and change the transmission position.
●
Appears if the shift position is repeatedly changed
between
(
P
and another position.
●
Wait awhile, then change the shift position.
●
Appears if the 12V battery is not charged enough to
make it possible to change shift positions.
●
Keep the power system on and wait awhile.
●
The battery may be nearing the end of its life.
Have it checked by a dealer.
118
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears for a few seconds if you have not pressed
the
(
N
button long enough to initiate Neutral-Hold
mode.
2
If you want to keep the transmission in
(
N
position [car wash mode]
P. 395
•
Appears when you press and hold
(
N
button for
more than two seconds.
•
Disappears when you set the shift position to a gear
other than
(
N
.
2
If you want to keep the transmission in
(
N
position [car wash mode]
P. 395
119
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears if there is a problem with the auto high-
beam.
•
Manually operate the headlight switch.
•
If you are driving with the high-beam headlights when
this happens, the headlights are changed to low beams.
●
Appears when ACC with Low Speed Follow has been
automatically canceled.
●
You can resume the set speed after the condition that
caused ACC with Low Speed Follow to cancel improves.
Press the
RES
/
+
button.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
●
Flashes when the system senses a likely collision with
a vehicle in front of you.
●
Take the appropriate means to prevent a collision (apply
the brakes, change lanes, etc.)
2
Collision Mitigation Braking System
P. 418
2
120
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
●
Appears when ACC with Low Speed Follow is
canceled due to excessive high vehicle speed.
●
Reduce the speed, then reset ACC with Low Speed
Follow.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
●
Appears when the speed of the vehicle is too high for
you to set ACC with Low Speed Follow.
●
Reduce the speed, then set ACC with Low Speed
Follow.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
●
Appears if ACC with Low Speed Follow is canceled
while your vehicle is automatically stopped by ACC
with Low Speed Follow.
●
Immediately depress the brake pedal.
●
Appears when pressing the
RES
/
+
or
SET
/
−
button
while the vehicle is moving and the brake pedal is
depressed.
●
ACC with Low Speed Follow cannot be set.
2
121
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
ent Pa
nel
Message
Condition
Explanation
●
Appears when the distance between your vehicle
and the vehicle ahead of you is too close while ACC
with Low Speed Follow is in operation.
●
ACC with Low Speed Follow has been automatically
canceled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
●
Appears when pressing the
RES
/
+
or
SET
/
−
button
while the distance between your vehicle and the
vehicle ahead of you is too close.
●
ACC with Low Speed Follow cannot be set.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
●
Appears when the parking brake is applied
automatically while ACC with Low Speed Follow is
in operation.
●
ACC with Low Speed Follow has been automatically
canceled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
2
●
Appears when pressing the
RES
/
+
or
SET
/
−
button
while the parking brake is applied.
●
ACC with Low Speed Follow cannot be set.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
2
122
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
●
Appears if the VSA
®
or traction control function
operates while ACC with Low Speed Follow is in
operation.
●
ACC with Low Speed Follow has been automatically
canceled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
●
Appears just before the ACC with Low Speed Follow
is automatically canceled when you are descending a
long hill etc (The following interval is automatically
set to extra long).
●
Appears when the ACC with Low Speed Follow has
been automatically canceled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
●
Appears when you are descending a long hill etc and
you press the
RES
/
+
or
SET
/
−
button.
2
123
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
ent Pa
nel
Message
Condition
Explanation
●
Appears when the driver’s seat belt is unfastened
while your vehicle is automatically stopped by ACC
with Low Speed Follow.
●
ACC with Low Speed Follow has been automatically
canceled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
P. 428
●
Appears when pressing the
RES
/
+
or
SET
/
−
button
while the driver’s seat belt is unfastened.
●
ACC with Low Speed Follow cannot be set.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
P. 428
●
Appears when the transmission is put into any
position other than
(
D
while ACC with Low Speed
Follow is in operation.
●
ACC with Low Speed Follow has been automatically
canceled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
P. 428
●
Appears when pressing the
RES
/
+
or
SET
/
−
button
while the transmission is in any position other than
(
D
.
●
ACC with Low Speed Follow cannot be set.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow
P. 428
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст