Honda Insight (2022 year). Manual in english — page 13
205
uu
Adjusting the Seats
u
Head Restraints
Co
ntrols
Head restraints can be removed for cleaning or repair.
To remove a head restraint:
Pull the restraint up as far as it will go. Then, push the release button and pull the
restraint up and out.
To reinstall a head restraint:
Insert the legs back in place, then adjust the head restraint to an appropriate height
while pressing the release button. Pull up on the restraint to make sure it is locked
in position.
■
Removing and Reinstalling the Front Head Restraints
1
Removing and Reinstalling the Front Head Restraints
3
WARNING
Failure to reinstall, or correctly reinstall, the
head restraints can result in severe injury
during a crash.
Always replace the head restraints before
driving.
206
uu
Adjusting the Seats
u
Armrest
Co
ntrols
Armrest
The console lid can be used as an armrest.
To adjust:
Slide the armrest to desired position.
Pull down the armrest in the center backrest.
■
Using the Front Seat Armrest
■
Using the Rear Seat Armrest
207
Continued
Co
ntrols
Interior Lights/Interior Convenience Items
Interior Lights
■
ON
The interior lights come on regardless of
whether the doors are open or closed.
■
Door activated
The interior lights come on in the following
situations:
•
When any of the doors are opened.
•
You unlock the driver’s door.
•
When the power mode is set to VEHICLE
OFF (LOCK).
■
OFF
The interior lights remain off regardless of
whether the doors are open or closed.
■
Interior Light Switches
1
In the door activated position, the interior lights fade
out and go off about 30 seconds after the doors are
closed.
The lights go off after about 30 seconds in the
following situations:
•
When you unlock the driver’s door but do not open it.
•
When you set the power mode to VEHICLE OFF
(LOCK) but do not open a door.
You can change the interior lights dimming time.
2
P. 326
The interior lights go off immediately in the following
situations:
•
When you lock the driver’s door.
•
When you close the driver’s door in ACCESSORY
mode.
•
When you set the power mode to ON.
To avoid draining the 12-volt battery, do not leave
the interior lights on for an extended length of time
when the power system is off.
If you leave any of the doors open in VEHICLE OFF
(LOCK) mode, the interior lights go off after about 15
minutes.
Door Activated Position
OFF
Front
*
Door Activated
Position
ON
OFF
Rear
* Not available on all models
uu
Interior Lights/Interior Convenience Items
u
Interior Lights
208
Co
ntrols
The map lights can be turned on and off by
pressing the lenses.
■
Map Lights
1
When the interior light switch is in the door activated
position and any door is open, the map light will not
go off when you press the lens.
Models with moonroof
209
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
Continued
Co
ntrols
Interior Convenience Items
Pull the handle to open the glove box.
■
Glove Box
1
3
WARNING
An open glove box can cause serious injury
to your passenger in a crash, even if the
passenger is wearing the seat belt.
Always keep the glove box closed while
driving.
210
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
Co
ntrols
Your vehicle has a multi-function center
console. It includes a storage compartment,
an armrest, and a sliding tray
*
.
Slide the armrest to the rearmost position. Pull
the handle to open the console compartment.
You can put small items in the sliding tray
*
located in the console compartment lid. Slide
the sliding tray
*
forward or rearward.
You can create more storage space by
removing the removable beverage holder tray
and a divider.
■
Console Compartment
Sliding Tray
*
Removable
Beverage
Holder Tray
Divider
* Not available on all models
Continued
211
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
Co
ntrols
■
Front seat beverage holders
Are located in the console between the front
seats.
u
Move the armrest rearward to use the
beverage holders.
To place a short beverage container:
Move the removable beverage holder tray
forward.
To place a tall beverage container:
Move
the removable beverage holder tray rearward.
■
Beverage Holders
1
NOTICE
Spilled liquids can damage the upholstery, carpeting,
and electrical components in the interior.
Be careful when you are using the beverage holders.
Hot liquid can scald you.
212
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
Co
ntrols
■
Door side beverage holders
Are located on the both of the front and rear
door side pockets.
■
Rear seat beverage holders
Fold the armrest down to use the rear seat
beverage holders.
Front
Rear
Continued
213
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
Co
ntrols
The accessory power socket can be used when the power mode is in ACCESSORY or
ON.
■
Accessory power socket (console panel)
Open the cover to use it.
■
Accessory Power Socket
1
NOTICE
Do not insert an automotive type cigarette lighter
element. This can overheat the power socket.
The accessory power socket is designed to supply
power for 12-volt DC accessories that are rated
180 watts (15 amps) or less.
To prevent 12-volt battery drain, only use the power
socket with the power system on.
When the accessory power socket is not in use, close
the cover to prevent any small foreign objects from
getting into the accessory power socket.
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
214
Co
ntrols
There is a coat hook on the rear left grab
handle. Pull it down to use it.
There are coat hooks on the left and right
door pillars.
■
Coat Hooks
1
The coat hooks are not designed for large or heavy
items.
215
uu
Interior Lights/Interior Convenience Items
u
Interior Convenience Items
Co
ntrols
The power mode must be in ON to use the
seat heaters.
Press the seat heater button:
Once - The HI setting (three indicators on)
Twice - The MID setting (two indicators on)
Three times - The LO setting (one indicator on)
Four times - The OFF setting (no indicators on)
When the power mode is turned on after it is
turned off, the previous setting is maintained.
■
Seat Heaters
*
1
Do not use the seat heaters even in LO when the
power system is off. Under such conditions, the 12-
volt battery may be weakened, making it difficult to
turn the power system on.
After a certain period of time, the strength setting for
the front seat heaters will automatically be reduced
by one level at a time until the front seat heaters
shuts off. The elapsed time varies according to the
interior environment.
3
WARNING
Heat induced burns are possible when
using seat heaters.
Persons with a diminished ability to sense
temperature (e.g., persons with diabetes,
lower-limb nerve damage, or paralysis) or
with sensitive skin should not use seat
heaters.
* Not available on all models
216
Co
ntrols
Climate Control System
Using Automatic Climate Control
The automatic climate control system maintains the interior temperature you select.
The system also selects the proper mix of heated or cooled air that raises or lowers
the interior temperature to your preference as quickly as possible.
Use the system when the power system is on.
1.
Press the
AUTO
button.
2.
Adjust the interior temperature using the temperature control dial.
3.
Press the
(ON/OFF) button to cancel.
1
Using Automatic Climate Control
If any buttons are pressed while using the climate
control system in auto, the function of the button
that was pressed will take priority.
The
AUTO
indicator will go off, but functions
unrelated to the button that was pressed will be
controlled automatically.
To prevent cold air from blowing in from outside, the
fan may not start immediately when the
AUTO
button is pressed.
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on auto, and setting the
temperature to low. Change the fresh air mode to
recirculation mode until the temperature cools down.
When you set the temperature to the lower or upper
limit,
Lo
or
Hi
is displayed.
Pressing the
button switches the climate
control system between on and off. When turned on,
the system returns to your last selection.
While ECON mode is active, the climate control
system may have reduced cooling performance.
Floor and
defroster
vents
Floor vents
Dashboard
and floor
vents
Dashboard
vents
AUTO
Button
(Recirculation)
Button
Fan Control
Dial
A/C
(Air Conditioning)
Button
(ON/OFF)
Button
Temperature
Control Dial
Models without SYNC button
217
uu
Climate Control System
u
Using Automatic Climate Control
Continued
Co
ntrols
Use the system when the power system is on.
1.
Press the
AUTO
button.
2.
Adjust the interior temperature using the driver’s side or passenger’s side
temperature control dial.
3.
Press the
(ON/OFF) button to cancel.
Models with SYNC button
Floor and
defroster
vents
Floor vents
Dashboard
and floor
vents
Dashboard
vents
(ON/OFF) Button
Driver’s Side
Temperature
Control Dial
AUTO
Button
A/C
(Air Conditioning)
Button
Passenger’s Side
Temperature
Control Dial
SYNC
(Synchronization)
Button
Fan Control Button
(Recirculation) Button
218
uu
Climate Control System
u
Using Automatic Climate Control
Co
ntrols
■
Switching between the recirculation and fresh air modes
Press the
(recirculation) button and switch the mode depending on
environmental conditions.
Recirculation mode (indicator on): Recirculates air from the vehicle’s interior through
the system.
Fresh air mode (indicator off): Maintains outside ventilation. Keep the system in
fresh air mode in normal situations.
Continued
219
uu
Climate Control System
u
Using Automatic Climate Control
Co
ntrols
Pressing the
button turns the air
conditioning system on and automatically
switches the system to fresh air mode.
Press the
button again to turn off, the
system returns to the previous settings.
■
Defrosting the Windshield and Windows
1
Defrosting the Windshield and Windows
For your safety, make sure you have a clear view
through all the windows before driving.
Do not set the temperature near the upper or lower
limit.
When cold air hits the windshield, the outside of the
windshield may fog up.
If the side windows fog up, adjust the vents so that
the air hits the side windows.
Models without SYNC button
Models with SYNC button
uu
Climate Control System
u
Using Automatic Climate Control
220
Co
ntrols
■
To rapidly defrost the windows
1.
Press the
button.
2.
Press the
button.
1
To rapidly defrost the windows
After defrosting the windows, switch over to fresh air
mode. If you keep the system in recirculation mode,
the windows may fog up from humidity. This
impedes visibility.
Models without SYNC button
Models with SYNC button
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст