Honda e (2021 year). Manual in english — page 26
uu
When Driving
u
Single Pedal Control
402
Driving
After turning on the system, you can choose from three decelerations stages.
You can change the deceleration rate by pulling on a paddle selector.
Each time you pull the paddle selector, the deceleration rate will change by one
stage.
u
The stage will not change if you pull and hold the paddle selector.
■
Adjusting the Deceleration Rate
1
Adjusting the Deceleration Rate
The stage may not change if the right and left paddle
selectors are pulled at the same time.
In the following conditions, the stage will not change
and the indicator will blink even if you pull the paddle
selector.
In addition, the stage may automatically decrease.
•
The vehicle accelerates/decelerates repeatedly.
•
The vehicle is on a long downward slope.
•
The vehicle has been driving for a long time with a
heavy load.
3
WARNING
Be careful when adjusting the deceleration
rate.
Depending on the deceleration rate, the
tyres may skid on slippery surfaces.
403
uu
When Driving
u
Single Pedal Control
Driving
a
Decrease
b
Deceleration Stage
c
Increase
d
Paddle Selector
e
Increase the deceleration stage when pulling the
(
-
paddle selector (left side)
f
Decrease the deceleration stage when pulling the
(
+
paddle selector (right side)
g
Shows Possible one to three of Stages
h
Currently Set Stage
404
uu
When Driving
u
Acoustic Vehicle Alerting System
Driving
Acoustic Vehicle Alerting System
Alerts pedestrians when a vehicle is propelled solely by electricity, approaching at
speeds around 25 km/h (16 mph) or less.
405
uu
When Driving
u
Adjustable Speed Limiter
Continued
Driving
Adjustable Speed Limiter
This system enables you to set a maximum speed that cannot be exceeded even if
you are depressing the accelerator pedal.
The vehicle speed limit can be set from about 30 km/h (18 mph) to 250 km/h
(156 mph).
1
The adjustable speed limiter may not hold the set
speed limit when driving downhill. If this occurs, slow
down by depressing the brake pedal.
When not using the adjustable speed limiter:
Turn off the adjustable speed limiter by pressing the
button.
You cannot use the adjustable speed limiter and the
Adaptive Cruise Control (ACC) with Low Speed
Follow/Intelligent Speed Limiter at the same time.
3
WARNING
Adjustable Speed Limiter has limitations.
It is always your responsibility to adjust the
vehicle speed to obey the actual speed
limit, and safely operate the vehicle.
3
WARNING
Do not depress the accelerator pedal more
than necessary.
Maintain an appropriate accelerator pedal
position depending on the vehicle speed.
a
Press the
button on the steering wheel.
b
If a different indicator comes on, press the
LIM
button to switch to the adjustable
speed limiter.
c
The adjustable speed limiter indicator (white) is on in the gauge. Adjustable
speed limiter is ready to use.
How to use
uu
When Driving
u
Adjustable Speed Limiter
406
Driving
•
Take your foot off the pedal and press the
SET/−
button when you reach the
desired speed.
The moment you release the
SET/−
button, the speed limit is fixed, and the
adjustable speed limiter is set. The speed limit is displayed.
•
You can set the previously set speed limit by pressing the
RES/+
button.
■
To Set the Vehicle Speed
1
If you set the speed limit while travelling at less than
30 km/h (18 mph), the speed limit is set to 30 km/h
(18 mph).
The beeper sounds and the displayed speed limit
blinks if the vehicle speed exceeds the limit by 3 km/h
(2 mph) or more on a steep descent.
The adjustable speed limiter is set to the current
speed if it is higher than the previously set speed limit
when you press the
RES/+
button.
You can switch the displayed set speed
measurements between km/h and mph on the driver
information interface or the audio/information
screen.
2
P. 168
2
P. 327
a
SET/−
Button
b
On when the adjustable speed limiter is set (green)
c
RES/+
Button
d
Setting Status (green)
Continued
407
uu
When Driving
u
Adjustable Speed Limiter
Driving
Increase or decrease the speed limit by using the
RES/+
or
SET/−
buttons on the
steering wheel.
•
Each time you press the button, the speed limit increases or decreases by 1 km/h
or 1 mph accordingly.
•
If you keep the button pressed, the speed limit increases or decreases in
increments of 10 km/h or 10 mph every 0.5 second until system limit is reached.
•
The vehicle may accelerate or decelerate until the set speed is reached.
The speed limit can be exceeded by depressing the acceleration pedal completely.
u
The displayed limit speed blinks.
u
The beeper sounds once the speed limit has been exceeded.
■
To Adjust the Speed Limit
a
To increase speed
b
To decrease speed
■
Exceeding the Speed Limit Temporarily
1
Exceeding the Speed Limit Temporarily
The beeper sounds when the vehicle speed goes
higher than the set speed limit with the acceleration
pedal depressed completely.
The adjustable speed limiter resumes working once
the vehicle speed goes lower than the set speed limit.
uu
When Driving
u
Adjustable Speed Limiter
408
Driving
To cancel the adjustable speed limiter, do any
of the following:
•
Press the
CANCEL
button.
•
Press the
button.
•
Press the
LIM
button.
■
To Cancel
1
The adjustable speed limiter changes into Adaptive
Cruise Control (ACC) with Low Speed Follow or
Intelligent Speed Limiter if the
LIM
button is pressed.
Resuming the prior set speed:
CANCEL
button, the prior set speed is displayed on
the gauge in gray.
When pressing the
RES/+
button, the adjustable
speed limiter is activated with displayed speed.
If the adjustable speed limiter is set to the current
speed if it is higher than the previously set speed limit
when you press the
RES/+
button.
a
Adjustable Speed Limiter Indicator
(white)
b
Prior Set Speed (gray)
c
Setting Status (gray)
a
LIM
Button
b
CANCEL
Button
c
Button
409
uu
When Driving
u
Adjustable Speed Limiter
Driving
1
If there is a problem with the system when you are
using the adjustable speed limiter, the beeper sounds
and
OFF
comes on. The adjustable speed limiter will
be turned off.
a
Adjustable Speed Limiter Indicator
(white)
410
uu
When Driving
u
Intelligent Speed Limiter
Driving
Intelligent Speed Limiter
Automatically sets the speed limit that the traffic sign recognition system detects.
And the speed limit cannot be exceeded even if you are depressing the accelerator
pedal. If you fully depress the accelerator the speed limit can be exceeded.
2
Traffic Sign Recognition System
1
Depending on the amount of depression of the
accelerator pedal, the vehicle will accelerate until it
reaches the speed identified by the traffic sign
recognition system.
3
WARNING
Intelligent Speed Limiter has limitations.
The Intelligent Speed Limiter may set itself
to a speed above or below the actual speed
limit, or may not work, particularly where
the traffic sign recognition system does not
operate correctly or where a road has no
speed limit signs. It is always your
responsibility to adjust the speed to obey
the actual speed limit and to safely operate
the vehicle.
Continued
411
uu
When Driving
u
Intelligent Speed Limiter
Driving
1
The system is designed to detect signs that follow the
Vienna Convention standards. Not all signs may be
detected, but any signs posted on roadsides should
not be ignored. The system does not work on the
designated traffic signs of all the countries you travel,
nor in all situations.
2
Traffic Sign Recognition System
P. 488
If the intelligent speed limiter is set to the wrong
speed limit, try one of the following:
To cancel
•
Press the
CANCEL
button.
•
Press the
button.
•
Press the
LIM
button.
To exceed the speed limit temporarily
•
Depressing the accelerator pedal fully.
The intelligent speed limiter may not hold the set
speed limit when driving downhill. If this occurs, slow
down by depressing the brake pedal.
When not using the intelligent speed limiter, turn off
the intelligent speed limiter by pressing the
button.
You cannot use the intelligent speed limiter and ACC
with Low Speed Follow or adjustable speed limiter at
the same time.
a
Press the
button on the steering wheel.
b
If a different indicator comes on, press the
LIM
button to change it to the
intelligent speed limiter.
c
The intelligent speed limiter indicator (white) is on in the gauge. Intelligent speed
limiter is ready to use.
How to use
uu
When Driving
u
Intelligent Speed Limiter
412
Driving
1
Do not use the intelligent speed limiter in areas of
different units from the display unit of the intelligent
speed limiter.
Change the displayed measurement of the set vehicle
speed to the same units as the driving areas.
2
P. 168
2
P. 327
Continued
413
uu
When Driving
u
Intelligent Speed Limiter
Driving
•
The moment you release the
SET/−
button or
RES/+
button, the intelligent speed
limiter is set to the speed limit that the traffic sign recognition system detects. The
speed limit is displayed.
■
To Set the Speed Limit
1
If you set the intelligent speed limiter when the speed
limit that the traffic sign recognition system detects is
less than 30 km/h (18 mph), the speed limitation
function and warning function may switch to pause.
If your vehicle speed is higher than the speed limit
that the traffic sign recognition system detects, your
vehicle decelerates slowly to the speed limit or less. If
necessary, slow down by depressing the brake pedal.
And the beeper sounds and the displayed speed limit
blinks if the vehicle speed exceeds the limit by 3 km/h
(2 mph) or more.
The intelligent speed limiter may also switch to pause
when the traffic sign recognition system detects only
additional speed limit signs.
a
SET/−
Button
b
On when the intelligent speed limiter is set to the speed limit that the traffic sign
recognition system detects.
c
RES/+
Button
d
Intelligent Speed Limiter Indicator (green)
e
Setting Status (green)
414
uu
When Driving
u
Intelligent Speed Limiter
Driving
■
When the traffic sign recognition system detects the new speed limit sign
The intelligent speed limiter is set to the new speed limit that the traffic sign
recognition system detects.
■
The speed limitation function and warning function may switch to pause
if there is no speed limit sign in the screen of the traffic sign recognition
system when:
•
The end of speed limit or other designated limit is detected.
•
Your vehicle enters/exits motorway or highway.
•
You make a turn with a turn signal to change direction at an intersection.
415
uu
When Driving
u
Intelligent Speed Limiter
Continued
Driving
■
When the traffic sign recognition system detects the speed limit sign while
the intelligent speed limiter is paused
The speed limitation function and warning function will be resumed automatically.
■
When the traffic sign recognition system does not detect the speed limit
sign for a time while the intelligent speed limiter is activated
While driving, in addition to when the traffic sign recognition system detects no
speed limit sign, the traffic sign recognition system may display no speed limit.
But, intelligent speed limiter functions continue.
uu
When Driving
u
Intelligent Speed Limiter
416
Driving
Increase or decrease the speed limit by using the
RES/+
or
SET/−
buttons on the
steering wheel.
•
Each time you press the button, the speed limit is increased or decreased by about
1 km/h or 1 mph accordingly.
•
You can increase the speed limit until +10 km/h or +5 mph on the basis of the
speed limit that the traffic sign recognition system detects.
•
You can decrease the speed limit until -10 km/h or -5 mph on the basis of the
speed limit that the traffic sign recognition system detects.
•
You can accelerate until the set speed is reached. If your vehicle speed is higher
than the speed limit that the traffic sign recognition system detects, your vehicle
decelerates slowly to the speed limit.
■
To Adjust the Speed Limit
1
A negative or positive offset with respect to the
speed limit will be reset automatically when the
traffic sign recognition system detects the new speed
limit sign.
You cannot decrease the speed limit less than
30 km/h (18 mph).
a
To increase speed
b
To decrease speed
417
uu
When Driving
u
Intelligent Speed Limiter
Driving
The speed limit can be exceeded by depressing the accelerator pedal fully.
u
The displayed speed limit blinks.
The beeper sounds once the speed limit has been exceeded.
To cancel the intelligent speed limiter, do any
of the following:
•
Press the
CANCEL
button.
•
Press the
button.
•
Press the
LIM
button.
■
Exceeding the Speed Limit Temporarily
■
To Cancel
1
Exceeding the Speed Limit Temporarily
The beeper sounds when the vehicle speed goes
higher than the set speed limit with the acceleration
pedal depressed completely.
The intelligent speed limiter resumes working once
the vehicle speed goes lower than the set speed limit.
1
The intelligent speed limiter changes into adaptive
cruise control (ACC) with Low Speed Follow or
adjustable speed limiter if the
LIM
button is pressed.
If there is a problem with the system or traffic sign
recognition system when you are using the intelligent
speed limiter, the beeper sounds and
OFF
comes on.
The intelligent speed limiter will be turned off.
2
Traffic Sign Recognition System
P. 488
a
Intelligent Speed Limiter Indicator
(white)
a
LIM
Button
b
CANCEL
Button
c
Button
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст