Honda e (2021 year). Manual in english — page 22
338
uu
Display Audio
u
Customized Features
Features
*1:Default Setting
Customizable Features
Description
Selectable Settings
Blind spot information
*
Selects On/Off the blind spot information system audible alert.
2
P. 423
Audible and visual alert
*1
/
Visual Alert Only
Traffic Sign Recognition
System Display
Displays the traffic sign recognition system on the instrument panel.
2
Traffic Sign Recognition System
Display
*1
/
None
Traffic Sign Recognition
System Speed Limit
Warning
Enables over speed limit warning when speed limit is exceeded.
2
Traffic Sign Recognition System
ON
*1
/
OFF
Side Camera Mirror View
Selects the side camera mirror view.
2
P. 221
Wide
/
Normal
*1
Reference Line Display
Turns on/off the reference line display during indicator activation.
2
ON with Indicator
*1
/
ON
with Indicator + 2 Seconds
/
OFF
Reference Line Display
(Reverse)
Turns on/off the reference line display while in
(
R
.
2
ON
*1
/
OFF
Apply Parking Brake after
Honda Parking Pilot
*
Automatically applies the parking brake at the completion of a
Honda Parking Pilot manoeuvre.
2
P. 537
ON
*1
/
OFF
Honda Parking Pilot Space
Detect Beep
*
Turns on/off the audible notification when Honda Parking Pilot
detects an available parking space.
2
P. 537
ON
*1
/
OFF
* Not available on all models
339
uu
Display Audio
u
Customized Features
Continued
Features
■
Meter setup
*1:Default Setting
Customizable Features
Description
Selectable Settings
Warning message
Selects whether to display the warning message.
2
Driver Information Interface Warning and Information
Messages
ON
/
OFF
*1
Adjust outside temp. display
Selects to adjust outside temperature reading by a few degrees.
2
P. 155
-3°C
~
±0°C
*1
~
+3°C
Trip A reset timing
Selects the timing to reset Trip A.
2
Range / Energy Consumption / Trip Meter
2
When charged
/
Manual reset
*1
/
POWER OFF
Trip B reset timing
Selects the timing to reset Trip B.
2
Range / Energy Consumption / Trip Meter
2
When charged
/
Manual reset
*1
/
POWER OFF
Alarm volume control
Changes volume level of all system warnings, door opening
warning and indicator.
Max
/
Mid
*1
/
Min
Indicator tone
Selects the indicator tone.
Tone1
*1
/
Tone2
/
Tone3
Reverse position alert tone
Turns on/off the reverse alert sound.
ON
*1
/
OFF
Turn by turn display
Turns on/off the pop-up warning in the turn-by-turn navigation
in the driver information interface.
2
ON
*1
/
OFF
340
uu
Display Audio
u
Customized Features
Features
*1:Default Setting
■
Keyless Access Setup
*1:Default Setting
Customizable Features
Description
Selectable Settings
Speed/distance units
Selects the trip computer units.
2
P. 168
km/h · km
*1
/
mph · miles
km/h · km
/
mph · miles
*1
Rear seat reminder
Turns on/off notifications when there may be an object in the
rear seats.
2
Driver Information Interface Warning and Information
Messages
P. 130
ON
*1
/
OFF
Customizable Features
Description
Selectable Settings
Smart Entry Light Flash
Turns on/off the flash of the exterior lights when doors are
unlocked/locked by holding or touching the sensor switch on outer
door handles.
2
Using the Keyless Access System
P. 175
ON
*1
/
OFF
Auto Power ON/OFF
Turns on/off automatically in conjunction with bringing in and
taking out the key.
2
ON
*1
/
OFF
Left-hand drive type
Right-hand drive type
341
uu
Display Audio
u
Customized Features
Continued
Features
■
Lighting Setup
*1:Default Setting
Customizable Features
Description
Selectable Settings
Interior light dimmer
duration
Selects the length of time the interior lights stay on after doors are
closed.
2
P. 235
60sec
/
30sec
*1
/
15sec
Headlight auto OFF timer
Selects the length of time the exterior lights stay on after you close
the driver's door.
2
Automatic Lighting Off Feature
P. 203
60sec
/
30sec
/
15sec
*1
/
0sec
Headlight integration with
wipers
Selects On/Off headlight function and wiper operation when the
headlight is in
AUTO
setting.
2
Headlight Integration with Wipers
ON
*1
/
OFF
342
uu
Display Audio
u
Customized Features
Features
■
Door/Window Setup
*1:Default Setting
■
Maintenance Info.
*
Customizable Features
Description
Selectable Settings
The outer handle pop-out
setting
Turns on/off to activate the custom settings on key fob for the outer
handle auto pop-out function.
2
Using the Keyless Access System
P. 175
ON
*1
/
OFF
Keyless lock notification
Turns on/off flash of exterior lights when doors are locked/unlocked
by remote.
2
Using the Keyless Access System
P. 175
ON
*1
/
OFF
Security relock timer
Selects relock timing after unlocking vehicle with the key fob
without opening any doors.
2
P. 178
90sec
/
60sec
/
30sec
*1
Customizable Features
Description
Selectable Settings
Maintenance Info.
Resets the maintenance information.
2
P. 582
Selects Reset Items
* Not available on all models
343
uu
Display Audio
u
Defaulting All the Settings
Features
Defaulting All the Settings
Reset all the menu and customized settings as the factory defaults.
1.
Select
General Settings
.
2.
Select
System
.
3.
Select
Factory Data Reset
.
u
A confirmation message appears on the screen.
4.
Select
Continue
to reset the settings.
5.
Select
Continue
again to reset the settings.
u
The system will reboot.
1.
Select
Vehicle Settings
.
2.
Select
Default
.
3.
Select
Yes
.
■
Defaulting General Settings
■
Defaulting Vehicle Settings
1
When you transfer the vehicle to a third party, reset
all settings to default and delete all personal data.
If you perform
Factory Data Reset
, it will reset the
preinstalled apps to their factory default.
344
uu
Display Audio
u
Hands-Free Telephone System
Features
Hands-Free Telephone System
Hands-Free Telephone (HFT) system allows you to place and receive phone calls
using your vehicle’s audio system, without handling your mobile phone.
■
HFT Buttons
1
Place your phone where you can get good reception.
To use HFT, you need a
Bluetooth
-compatible mobile
phone. For a list of compatible phones, pairing
procedures, and special feature capabilities, ask a
dealer or your local Honda.
To use the system, the
Bluetooth
setting must be
ON
.
2
P. 351
Voice control tips
•
Aim the vents away from the ceiling and close the
windows, as noise coming from them may interfere
with the microphones.
•
Press the
button when you want to call a
number using a phonebook name or a number.
Speak clearly and naturally after a beep.
•
If the microphone picks up voices other than yours,
the command may be misinterpreted.
•
To change the volume level, select the audio
system’s
VOL
(Volume) or use the remote audio
controls on the steering wheel.
If there is no Favourite contacts entry in the system,
the pop-up notification appears on the screen.
2
P. 356
a
VOL
(
+
/
VOL
(
-
(Volume) Buttons
b
(Talk) Button
c
(Home) Button
d
Left Selector Wheel
e
(Back) Button
Continued
345
uu
Display Audio
u
Hands-Free Telephone System
Features
(Talk) button:
Press to access Voice Portal.
(Home) button:
Press to go back to the home screen of the driver information
interface.
Left Selector Wheel:
Press the
(home) button, then roll up or down to select
(phone) on the driver information interface, and then press the left selector
wheel.
While receiving a call, the incoming call screen is displayed on the driver information
interface. You can pick up the call using the left selector wheel.
2
(Back) button:
Press to go back to the previous screen or cancel a command.
1
Bluetooth
®
Wireless Technology
The
Bluetooth
®
word mark and logos are registered
trademarks owned by
Bluetooth
SIG, Inc., and any
use of such marks by Honda Motor Co., Ltd., is under
licence. Other trademarks and trade names are those
of their respective owners.
HFT Limitations
An incoming call on HFT will interrupt the audio
system when it is playing. It will resume when the call
is ended.
uu
Display Audio
u
Hands-Free Telephone System
346
Features
The audio/information screen notifies you when there is an incoming call.
■
HFT Status Display
1
The information that appears on the audio/
information screen varies between phone models.
a
Bluetooth
®
Indicator
Appears when your phone is connected to HFT.
b
Signal Strength
c
Battery Level Status
d
HFT Mode
e
Caller’s Name (If registered)/Caller’s Number (If not registered)
347
uu
Display Audio
u
Hands-Free Telephone System
Continued
Features
Certain manual functions are disabled or inoperable while the vehicle is in motion.
You cannot select a grayed-out option until the vehicle is stopped.
Only previously stored phonebook names or numbers can be called using voice
commands while the vehicle is in motion.
2
P. 356
■
Limitations for Manual Operation
uu
Display Audio
u
Hands-Free Telephone System
348
Features
The power mode must be in ACCESSORY or ON to use the system. Select
Phone
to
display the phone screen.
■
HFT Menus
1
Some functions are limited while driving.
a
Recent calls
b
Favourite contacts
c
Settings
d
Contacts
e
Keypad
349
uu
Display Audio
u
Hands-Free Telephone System
Continued
Features
Recent calls:
Displays the last outgoing, incoming, and missed calls.
2
To make a call using the recent calls
Favourite contacts:
Dials the selected number in the Favourite contacts entry.
2
To make a call using a Favourite contacts entry
Settings:
Changes the phone settings.
2
P. 350
Contacts:
Displays the phonebook of the paired phone.
2
To make a call using the imported phonebook
P. 359
Keypad:
Enters a phone number to dial.
2
To make a call using a phone number
P. 359
350
uu
Display Audio
u
Hands-Free Telephone System
Features
To display the phone settings screen, select
Settings
on the phone screen.
Change Devices:
Pairs a new phone to the system and connect, disconnect, or
delete a paired device.
2
P. 351
Auto Sync Phone:
Sets phonebook and recent calls data to be automatically
imported when a phone is paired to HFT.
2
Automatic Import of Mobile Phonebook and Recent calls
Auto Phone Call Transfer:
Sets calls to automatically transfer from your phone to
HFT when you enter the vehicle.
2
P. 355
Ringtone:
Selects the ring tone.
2
■
Phone Settings Screen
351
uu
Display Audio
u
Hands-Free Telephone System
Continued
Features
■
Bluetooth
®
setup
You can turn
Bluetooth
®
function on and off.
1.
Select
General Settings
.
2.
Select
Connections
.
3.
Select
Bluetooth
.
4.
Select
Options
.
5.
Select
Bluetooth
, then select
ON
.
■
Phone Setup
uu
Display Audio
u
Hands-Free Telephone System
352
Features
■
To pair a mobile phone (when there is
no phone paired to the system)
1.
Select
Phone
.
2.
Select
Connect New Device
.
3.
Make sure your phone is in search or
discoverable mode.
4.
Select
Honda HFT
from your phone.
u
If you want to pair a phone from this
audio system, select
Search for
Devices
, and then select your phone
when it appears on the list.
5.
The system gives you a pairing code on the
audio/information screen.
u
Confirm if the pairing code on the screen
and your phone match.
This may vary by a phone.
6.
Select desired functions and then select
Connect
.
7.
A notification appears on the screen if
pairing is successful.
8.
Select
OK
.
1
Your
Bluetooth
-compatible phone must be paired to
the system before you can make and receive hands-
free calls.
Phone Pairing Tips:
•
You cannot pair your phone while the vehicle is
moving.
•
Up to six phones can be paired.
•
Your phone’s battery may drain faster when it is
paired to the system.
Once you have paired a phone, you can see it
displayed on the screen with the following icons.
: The phone is compatible with
Bluetooth
®
Audio.
: The phone can be used with HFT.
: The phone is compatible with Apple CarPlay.
If there is an active connection to Apple CarPlay
pairing of additional
Bluetooth
®
compatible devices is
unavailable.
Continued
353
uu
Display Audio
u
Hands-Free Telephone System
Features
■
To change the currently paired phone
1.
Select
Phone
.
2.
Select
Settings
.
3.
Select
Change Devices
.
4.
Select a phone to connect.
u
HFT disconnects the connected phone
and starts searching for another paired
phone.
u
You can set the connected phone
priority. Select the box checked on the
phone you want to prioritize.
5.
Select
(audio),
(phone), or
(Apple
CarPlay).
u
and
can be selected
simultaneously, however, when
is
selected,
and
cannot be selected.
6.
Select
Apply
.
■
To delete a paired phone
1.
Select
Phone
.
2.
Select
Settings
.
3.
Select
Change Devices
.
4.
Select a phone you want to delete.
5.
Select
Delete
.
6.
A confirmation message appears on the
screen. Select
Delete
.
1
To change the currently paired phone
If no other phones are found or paired when trying to
switch to another phone, HFT will inform you that the
original phone is connected again.
To pair other phones, select
+ Connect New Device
from the
Bluetooth
screen.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст