Honda Odyssey 2004. Manual — part 260
01
S0X4AA1E10480154501MEAT00
SPRING SPECIFICATIONS
No.
Spring
Standard (New)-Unit: mm (in.)
Wire Dia.
O.D.
Free Length
No. of Coils
14-434
Valve Body
Servo Body Disassembly, Inspection, and Reassembly
CPC VALVE A
VALVE CAP
CPC VALVE B
SHIFT VALVE B
VALVE CAP CLIP
SHIFT VALVE A
SPRING SEAT
O-RING
SERVO VALVE/
SHIFT FORK SHAFT
SERVO BODY
1. Clean all parts thoroughly in solvent or carburetor cleaner, and dry them with compressed air. Blow out all
passages.
2. Check all valves for free movement. If any fail to slide freely, refer to Valve Body Repair (see page 14-428).
3. Replace the valve body as an assembly if any parts are worn or damaged.
4. Coat all parts with ATF during assembly.
CPC valve A spring
0.7 (0.028)
6.1 (0.240)
17.8 (0.701)
7.9
CPC valve B spring
0.7 (0.028)
6.1 (0.240)
17.8 (0.701)
7.9
Shift valve B spring
0.8 (0.031)
6.6 (0.260)
49.1 (1.933)
21.7
Shift valve A spring
0.8 (0.031)
6.6 (0.260)
49.1 (1.933)
21.7
Replace.
Inspect for scoring
and damage.
03/07/29 09:45:53 61S0X050_140_0437
01
S0X4AA1E10480159544MEAT00
SPRING SPECIFICATIONS
No.
Springs
Standard (New)-Unit: mm (in.)
Wire Dia.
O.D.
Free Length
No. of Coils
14-435
Top Accumulator Body Disassembly, Inspection, and Reassembly
VALVE CAP
TOP ACCUMULATOR BODY
5TH ACCUMULATOR PISTON
O-RING
SNAP RINGS
O-RING
4HT ACCUMULATOR
PISTON
O-RING
1ST-HOLD ACCUMULATOR
PISTON
VALVE CAP CLIP
SPRING SEAT
SHIFT VALVE E
CAP VALVE C
O-RING
1. Clean all parts thoroughly in solvent or carburetor cleaner, and dry them with compressed air. Blow out all
passages.
2. Check all valves for free movement. If any fail to slide freely, refer to Valve Body Repair (see page 14-428).
3. Replace the valve body as an assembly if any parts are worn or damaged.
4. Coat all parts with ATF during assembly.
CPC valve C spring
0.7 (0.028)
6.1 (0.240)
17.8 (0.701)
7.9
Shift valve E spring
0.8 (0.031)
7.1 (0.280)
49.0 (1.929)
17.2
5th accumulator spring A
2.2 (0.087)
16.4 (0.646)
75.7 (2.980)
14.2
5th accumulator spring B
2.0 (0.079)
10.0 (0.394)
45.5 (1.791)
11.6
4th/1st-hold accumulator spring
3.4 (0.134)
19.6 (0.772)
57.4 (2.260)
8.4
Inspect for scoring and damage.
Replace.
Replace.
Replace.
Replace.
03/07/29 09:45:53 61S0X050_140_0438
*01
S0X4AA1E10480112501MEAT00
SPRING SPECIFICATIONS
No.
Springs
Standard (New)-Unit: mm (in.)
Wire Dia.
O.D.
Free Length
No. of Coils
14-436
Valve Body
Accumulator Body Disassembly, Inspection, and Reassembly
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
LUBRICATION CHECK VALVE
VALVE CLIP
ACCUMULATOR BODY
1ST ACCUMULATOR PISTON
O-RING
SNAP RINGS
O-RING
2ND ACCUMULATOR PISTON
CHECK BALLS, 2
ACCUMULATOR BODY COVER
O-RING
1. Do not use a magnet to remove the check balls; it may magnetize the balls.
2. Clean all parts thoroughly in solvent or carburetor cleaner, and dry them with compressed air. Blow out all
passages.
3. Coat all parts with ATF during assembly.
1st accumulator spring B
2.3 (0.091)
12.6 (0.496)
42.0 (1.654)
9.9
1st accumulator spring A
2.4 (0.094)
19.5 (0.768)
67.7 (2.665)
10.2
2nd accumulator spring B
2.6 (0.102)
13.2 (0.520)
44.0 (1.732)
8.5
2nd accumulator spring A
2.3 (0.091)
19.6 (0.772)
57.7 (2.272)
6.6
Inspect for scoring and damage.
Replace.
Replace.
Replace.
03/07/29 09:45:54 61S0X050_140_0439
*01
S0X4AA1E10480110311MEAT00
SPRING SPECIFICATIONS
No.
Springs
Standard (New)-Unit: mm (in.)
Wire Dia.
O.D.
Free Length
No. of Coils
14-437
3rd Accumulator and End Cover Disassembly, Inspection, and Reassembly
END COVER
O-RING
3RD ACCUMULATOR PISTON
3RD ACCUMULATOR BODY COVER
SNAP RING
1. Clean all parts thoroughly in solvent or carburetor cleaner, and dry them with compressed air. Blow out all
passages.
2. Coat all parts with ATF during assembly.
3rd accumulator spring
3.1 (0.122)
19.6 (0.772)
39.4 (1.551)
5.5
Replace.
03/07/29 09:45:54 61S0X050_140_0440
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст