Honda Odyssey 2004. Manual — part 330
−
−
−
−
−
−
S0X4A06K70200081610FAAT00
S0X4A06K70200081710FAAT00
ABS DTC 61, 62:
ABS DTC 71:
YES
NO
YES
NO
YES
NO
19-126
19-126
ABS/TCS Components
DTC Troubleshooting (cont’d)
Battery Voltage
Different Diameter Tire
1. Clear the DTC (see step 1 on page 19-83).
2. Test-drive the vehicle at 6 mph (10 km/h) or more.
Go to step 3.
The system is OK at this time.
3. Verify the DTC.
Check the charging system.
Do the appropriate troubleshooting for the
DTC.
1. Clear the DTC (see step 1 on page 19-83).
2. Test-drive the vehicle.
Make sure all four tires are the specified
size.
Intermittent failure; the vehicle is OK at this
time.
Does the ABS indicator come on?
Is DT C 61 or 62 indicated?
Does the ABS indicator come on and is DT C 7 1
indicated?
03/07/29 09:57:42 61S0X050_190_0126
−
−
−
−
−
−
S0X4A06K70200081810FAAT00
03
S0X4A06K70200081240FAAT10
ABS DTC 81:
TCS DTC 24, 25, 26, 27:
YES
NO
YES
NO
TCS DTC
Appropriate Terminal
YES
NO
19-127
19-127
NCL (YEL/GRN)
NOL (RED/GRN)
NCR
(GRY)
NOR (LT BLU)
ABS/TCS CONTROL UNIT CONNECTOR A (26P)
Central Processing Unit (CPU)
Diagnosis, and ROM/RAM Diagnosis
TCS Solenoid
1. Clear the DTC (see step 1 on page 19-83).
2. Test-drive the vehicle.
Replace the ABS/TCS control unit.
Intermittent failure; the vehicle is OK at this
time.
1. Verify the TCS DTC.
Do the appropriate troubleshooting for
DTC 28.
Go to step 2.
2. Turn the ignition switch OFF.
3. Disconnect the modulator unit connector and the
ABS/TCS control unit connector A (26P).
4. Check for continuity between the appropriate ABS/
TCS control unit connector A (26P) TCS solenoid
circuit terminal and body ground (see table).
24: NOR
No. 16
25: NCR
No. 15
26: NOL
No. 3
27: NCL
No. 2
Repair short to body ground in the
appropriate solenoid circuit wire between the
ABS/TCS control unit and the modulator unit.
Go to step 5.
(cont’d)
Wire side of female terminals
Does the ABS indicator come on and is DT C 81
indicated?
Is T CS DT C 28 indicated?
Is ther e continuity?
03/07/29 09:57:43 61S0X050_190_0127
−
−
04
13
TCS DTC
Appropriate Terminal
YES
NO
TCS DTC
Appropriate Terminal
19-128
ABS/TCS Components
DTC Troubleshooting (cont’d)
NCL (YEL/GRN)
NOL (RED/GRN)
NCR
(GRY)
NOR (LT BLU)
ABS/TCS CONTROL UNIT CONNECTOR A (26P)
MODULATOR UNIT CONNECTOR
NCR (GRY)
NOR (LT BLU)
NCL (YEL/GRN)
NOL (RED/GRN)
JUMPER WIRE
JUMPER WIRE
5. Connect the modulator unit connector.
6. Check for continuity between the appropriate ABS/
TCS control unit connector A (26P) solenoid circuit
terminal and body ground (see table).
24: NOR
No. 16
25: NCR
No. 15
26: NOL
No. 3
27: NCL
No. 2
Replace the modulator unit.
Go to step 7.
7. Disconnect the modulator unit connector.
8. Connect the appropriate modulator unit connector
TCS solenoid circuit terminals to body ground with
a jumper wires (see table).
24: NOR
No. 5
25: NCR
No. 6
26: NOL
No. 8
27: NCL
No. 7
Wire side of female terminals
Terminal side of female terminals
Is ther e continuity?
03/07/29 09:57:43 61S0X050_190_0128
−
−
−
−
−
05
15
06
TCS DTC
Appropriate Terminal
YES
NO
TCS DTC
Appropriate Terminal
YES
NO
19-129
NCL (YEL/GRN)
NOL (RED/GRN)
NCR
(GRY)
NOR (LT BLU)
ABS/TCS CONTROL UNIT CONNECTOR A (26P)
JUMPER
WIRE
TCS RELAY CONNECTOR
TCS
SOLENOID
(RED/BLU)
NCL (YEL/GRN)
NOL (RED/GRN)
NCR
(GRY)
NOR (LT BLU)
ABS/TCS CONTROL UNIT CONNECTOR A (26P)
9. Check for continuity between the appropriate
ABS/TCS control unit connector A (26P) solenoid
circuit terminal and body ground (see table).
24: NOR
No. 16
25: NCR
No. 15
26: NOL
No. 3
27: NCL
No. 2
Go to step 10.
Repair open in the appropriate TCS solenoid
circuit wire between the ABS/TCS control unit and
the modulator unit.
10. Remove the jumper wires from the modulator unit
connector.
11. Connect the modulator unit connector.
12. Remove the TCS relay, and connect the ABS
fail-safe relay connector terminal No. 2 to body
ground with a jumper wire. The wire colors of the
ABS fail-safe relay connector are BLU, RED/BLU,
BRN/BLK, and GRN/YEL.
13. Check the resistance between the appropriate ABS/
TCS control unit connector A (26P) terminal and
body ground (see table).
NOR, NOL, NCR, NCL: 8
10
(at 68°F, 20°C)
24: NOR
No. 16
25: NCR
No. 15
26: NOL
No. 3
27: NCL
No. 2
Go to step 16.
Go to step 14.
(cont’d)
Wire side of female terminals
Terminal side of female terminals
Wire side of female terminals
Is ther e continuity?
Is the r esistance OK ?
03/07/29 09:57:44 61S0X050_190_0129
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст