Honda Passport (2022 year). Manual in english — page 6
91
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
All-wheel drive
(
AWD
)
Indicator
*
●
Comes on for a few seconds when
you set the power mode to ON,
then goes off.
●
Comes on if there is a problem
with the AWD system.
●
Blinks when the differential
temperature is too high.
●
Stays on constantly
- The engine drives
the front wheels only in this state. Have
your vehicle checked by a dealer.
●
Blinks while driving
- Stop in a safe
place, change to
(
P
, and idle the engine
until the indicator goes off. If the
indicator does not stop blinking, take
your vehicle to a dealer.
2
Intelligent Variable Torque
Management (i-VTM4
Lane Keeping
Assist System
(
LKAS
) Indicator
(Amber)
•
Comes on for a few seconds when
you set the power mode to ON,
then goes off.
•
Comes on if there is a problem
with the LKAS.
•
Stays on constantly
- Have your vehicle
checked by a dealer.
Lane Keeping
Assist System
(
LKAS
) Indicator
(Green)
•
Comes on when you press the
MAIN
button.
2
Lane Keeping Assist System (LKAS)
P. 459
—
* Not available on all models
92
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Road Departure
Mitigation
(RDM) Indicator
•
Comes on for a few seconds when
you change the power mode to
ON, then goes off.
•
Comes on if there is a problem
with the RDM system.
•
Stays on constantly
- Have your
vehicle checked by a dealer.
•
Comes on when the RDM system
shuts itself off.
•
Stays on
- The temperature inside the
camera is too high.
Use the climate control system to cool
down the camera.
The system activates when the
temperature inside the camera cools
down.
2
P. 473
•
Stays on
- The area around the camera
is blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off
with a soft cloth.
•
Have your vehicle checked by a dealer if
the indicator and message come back on
after you cleaned the area around the
camera.
2
P. 473
93
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Adaptive Cruise
Control (
ACC
)
Indicator
(Amber)
•
Comes on for a few seconds when
you set the power mode to ON,
then goes off.
•
Comes on if there is a problem
with ACC.
•
Comes on while driving
- Have your
vehicle checked by a dealer.
Adaptive Cruise
Control (
ACC
)
Indicator (Green)
•
Comes on when you press the
MAIN
button.
2
P. 446
—
Collision
Mitigation
Braking
System
TM
(CMBS
TM
)
Indicator
•
Comes on for a few seconds when
you change the power mode to
ON, then goes off.
•
Comes on when you deactivate
the CMBS
TM
. A driver information
interface message appears for five
seconds.
•
Comes on if there is a problem
with the CMBS
TM
.
•
Stays on constantly without the
CMBS
TM
off
- Have your vehicle checked
by a dealer.
2
94
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Collision
Mitigation
Braking
System
TM
(CMBS
TM
)
Indicator
•
Comes on when the CMBS
TM
shuts itself off.
•
Stays on
- The temperature inside the
camera is too high. Use the climate
control system to cool down the camera.
The system activates when the
temperature inside the camera cools
down.
2
P. 473
•
Stays on
- The area around the camera
is blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off
with a soft cloth.
2
P. 473
•
Have your vehicle checked by a dealer if
the indicator does not go off even after
you cleaned the camera.
•
When the radar sensor gets dirty, stop
your vehicle in a safe place, and wipe off
dirt using a soft cloth. Indicator may take
some time to go off after the radar
sensor is cleaned.
•
Have your vehicle checked by a dealer if
the indicator does not go off even after
you clean the sensor cover.
2
95
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Blind spot
information
System Indicator
•
Stays on while blind spot
information system is turned off.
—
•
Comes on when mud, snow, or ice
accumulates in the vicinity of
sensor.
•
Comes on while driving
- Remove the
obstacle in the vicinity of the sensor.
2
P. 423
•
Comes on if there is a problem
with the system.
•
Comes on while driving
- Have your
vehicle checked by a dealer.
Models with Blind spot information System
* Not available on all models
96
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Driver Information Interface Warning and Information Messages
The following messages appear only on the driver information interface. Press the
(home) button, select
Warnings
, then press the
ENTER
button to see the message again with the system message indicator on.
Message
Condition
Explanation
•
Appears if any door or the tailgate is not completely
closed.
•
Goes off when all doors and the tailgate are closed.
•
Appears when the hood is opened.
•
Close the hood.
•
Appears when the engine oil pressure is low.
•
Appears while driving
- Immediately stop in a safe
place.
2
If the Engine Oil Low Warning Appears
•
Appears when the washer fluid is low
*
.
•
Refill the washer fluid.
2
•
Appears when the temperature of the transmission
is starting to get too hot.
•
The performance of the vehicle may be reduced.
•
Until the message disappears, reduce your speed and
allow the system to cool down.
•
Appears if the battery charge becomes low.
•
Charge the battery.
* Not available on all models
97
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when there is a problem with the sensor on
the battery.
•
Have your vehicle checked by a dealer.
2
•
Appears when the scheduled maintenance is due
soon.
•
Consequently,
Maintenance Due Now
and
Maintenance Past Due
follow.
2
Maintenance Minder Messages on the Driver
Information Interface
P. 503
•
Appears when the engine coolant temperature gets
abnormally high.
2
P. 565
•
Appears when there is a problem with the power
tailgate system.
•
Manually open or close the power tailgate.
•
Have your vehicle checked by a dealer.
•
Appears when the starter system has a problem.
•
As a temporary measure, press and hold the
ENGINE
START/STOP
button for up to 15 seconds while
pressing the brake pedal and manually start the engine.
•
Have your vehicle checked by a dealer.
U.S.
Canada
Models with power tailgate
U.S.
Canada
98
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the steering wheel is locked.
•
Move the steering wheel left and right while pressing
the
ENGINE START/STOP
button.
•
Appears when the power mode is in ACCESSORY.
—
•
Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
•
Change the power mode to VEHICLE OFF.
2
P. 158
•
Appears when you close the door with the power
mode in ON without the remote inside the vehicle.
•
Disappears when you bring the remote back inside the
vehicle and close the door.
2
P. 160
•
Appears when the remote battery becomes weak.
•
Replace the battery as soon as possible.
2
P. 539
•
Appears if the remote battery is too weak to start the
engine or the key is not within operating range to
start the engine.
A beeper sounds six times.
•
Bring the remote in front of the
ENGINE START/STOP
button to be touched with.
2
If the Keyless Remote Battery is Weak
P. 560
●
Appears three seconds after the
To Start, Hold
Remote Near Start Button
, then
To Start Engine
messages appeared sequentially.
●
Unless you bring the keyless remote in front of the
ENGINE START/STOP
button, this message does not
appear.
2
If the Keyless Remote Battery is Weak
P. 560
Canada
99
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears if there is a problem with the cooling
system.
•
Drive slowly to prevent overheating and have your
vehicle checked by a dealer as soon as possible.
•
Appears if there is a problem with the headlights.
•
Appears while driving
- The headlights may not be
on. When conditions allow you to drive safety, have
your vehicle checked by a dealer as soon as possible.
•
Appears if there is a problem with the parking sensor
system.
•
Check if the area around the sensor(s) is covered with
mud, ice, snow, etc. If the indicator(s) stays on or the
beeper does not stop even after you clean the area,
have the system checked by a dealer.
•
Appears if there are obstacles around the sensors.
•
Check for obstacles near your vehicle to make sure it is
safe to park.
•
Appears as soon as a problem is detected in the
keyless access system.
•
Appears constantly
- Have your vehicle checked by a
dealer.
•
Appears as soon as a problem is detected in the push
button starting system.
•
Appears constantly
- Have your vehicle checked by a
dealer.
●
Appears if you press the
ENGINE START/STOP
button while the vehicle is moving.
2
Models with parking sensor system
Models with parking sensor system
100
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears if there is a problem with the Auto high-
beam.
•
Manually operate the headlight switch.
•
If you are driving with the high-beam headlights when
this happens, the headlights are changed to low beams.
•
Appears when the area around the camera is
blocked by dirt, mud, etc. Stop your vehicle in a safe
place, and wipe it off with a soft cloth.
•
May appear when driving in bad weather (rain,
snow, fog, etc.)
•
Have your vehicle checked by a dealer if the message
comes back on after you cleaned the area around the
camera.
•
Flashes when the system senses a likely collision with
a vehicle in front of you.
•
Take the appropriate means to prevent a collision (apply
the brakes, change lanes, etc.)
2
Collision Mitigation Braking System
P. 434
2
P. 446
•
Appears when ACC has been automatically
canceled.
•
You can resume the set speed after the condition that
caused ACC to cancel improves. Press the
RES/+
button.
2
P. 446
•
Appears when pressing the
–/SET
button while the
vehicle is moving, and the brake pedal is depressed.
•
ACC cannot be set.
2
P. 446
•
Appears if the VSA
®
or traction control function
operates while ACC is in operation.
•
ACC has been automatically canceled.
2
P. 446
101
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the speed of the vehicle is too high
for you to set ACC.
•
Reduce the speed, then set ACC.
2
P. 446
•
Appears when ACC is canceled due to excessive
vehicle speed.
•
Reduce the speed, then reset ACC.
2
P. 446
•
Appears when the speed of the vehicle is too low for
you to set ACC.
•
Raise the speed, then set ACC.
2
P. 446
•
Appears when ACC is canceled due to excessive low
vehicle speed.
•
Raise the speed, then reset ACC.
2
P. 446
102
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the vehicle is driving out of a detected
lane. The steering wheel vibrates rapidly.
•
Keep the vehicle within the lane you are driving.
2
Lane Keeping Assist System (LKAS)
P. 459
•
Appears when the vehicle is driving out of a detected
lane.
-
The steering wheel vibrates rapidly when the
vehicle is drifting out of a detected lane.
-
The steering wheel vibrates rapidly when the
vehicle is drifting out of a detected line. The system
also steers the vehicle to help you remain within
your driving lane.
•
Keep the vehicle within the lane you are driving.
2
Road Departure Mitigation (RDM) System
•
You can change the setting for the road departure
mitigation system.
Normal
,
Wide
, and
Warning Only
can be selected.
2
P. 327
•
Blinks when you fail to steer the vehicle. The beeper
sounds simultaneously.
•
Operate the steering wheel to resume the LKAS.
•
Appears when the LKAS is in operation, or the LKAS
button is pressed, but there is a problem with a
system related to the LKAS. The LKAS cancels
automatically. The beeper sounds simultaneously if
selected by customization.
•
If any other system indicators come on, such as the
VSA
®
, ABS and brake system, take appropriate action.
2
P. 80
Lane Keeping Assist System (LKAS)
Road Departure Mitigation (RDM) System
When you selected
Warning Only
When you selected
Normal
or
Wide
103
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears if the temperature inside the camera is too
high and some driver assist systems cannot be
activated.
•
Use the climate control system to cool down the
camera.
•
Disappears
- The camera has been cooled down and
the systems are activated normally.
2
P. 473
•
Appears if the area around the front sensor camera
is blocked by dirt, mud, etc. and be prevented from
detecting a vehicle in front.
•
May appear when driving in bad weather (rain,
snow, fog, etc.)
•
When the front window gets dirty, stop your vehicle in
a safe place, and wipe it off with a soft cloth.
•
Have your vehicle checked by a dealer if the message
does not disappear even after you cleaned the area
around the camera.
2
P. 473
●
Appears if anything covers the radar sensor cover
and prevents the sensor from detecting a vehicle in
front.
●
May appear when driving in bad weather (rain,
snow, fog, etc.)
●
When the radar sensor gets dirty, stop your vehicle in a
safe place, and wipe off dirt using a soft cloth. The
message may take some time to go off.
●
Have your vehicle checked by a dealer if the message
does not disappear even after you clean the sensor
cover.
2
●
Appears when the transmission system temperature
is too high. The vehicle does not operate properly.
●
Stop in a safe place in
(
P
.
●
Let the engine idle until the message disappears.
104
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when you set the power mode to
ACCESSORY or ON.
2
P. 394
•
Appears when the engine does not restart
automatically due to the following reason:
•
The hood is open.
•
There is a problem in the system that disables Auto
Idle Stop.
•
Follow the normal procedure to start the engine.
2
P. 394
•
Appears when you attempt to change to another
gear position with the transmission in
(
P
and the
engine OFF.
•
To select another gear position while in
(
P
, the engine
must be ON.
•
Appears when you set the power mode to OFF while
driving.
•
Immediately stop in a safe place, set the parking brake,
then restart the engine. If the message disappears,
continue driving.
●
Appears when you try to change the gear position
after the position has automatically been changed to
(
P
with the driver’s door open and the driver’s seat
belt unfastened.
●
Press the park button if you leave the vehicle.
105
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears if the vehicle is stationary and the
transmission is put into
(
N
, the driver's seatbelt is
unfastened, and the brake pedal is released, as there
is a risk that the vehicle might roll unexpectedly.
•
Press the
(
P
button before releasing the brake pedal
when idling, parking or exiting the vehicle.
2
P. 405
•
Appears when the engine stops without the
transmission in
(
P
, and does not restart
automatically.
•
Appears if you open the hood while Auto Idle Stop
activates.
•
If you want to set the power mode to ON, change the
gear position to
(
P
.
•
If you want to start the engine, follow the normal
procedure.
2
P. 394
•
Appears when you change to
(
N
, then release the
(
N
button.
2
If you want to keep the transmission in
(
N
position [car wash mode]
P. 407
•
Appears when you press and hold
(
N
button for
more than two seconds.
•
Disappears when you set the gear position to other
than
(
N
.
2
If you want to keep the transmission in
(
N
position [car wash mode]
P. 407
•
Appears when car wash mode is not available due to
hot transmission.
•
When transmission is too hot, car wash mode may not
be available. Let the engine idle and cool down
transmission.
2
If you want to keep the transmission in
(
N
position [car wash mode]
P. 407
•
Appears when you try to change the gear position
without depressing the brake pedal.
•
Depress the brake pedal, then select a shift button.
106
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when you try to change the gear position
without releasing your foot off the accelerator pedal.
•
Release your foot off the accelerator pedal, then select
a shift button.
•
Appears when the
(
P
button is pressed while the
vehicle is moving.
•
Appears if you change the gear position to
(
R
while
the vehicle is moving forward, or to
(
D
while the
vehicle is reversing.
•
Make sure that the vehicle comes to a stop before
operating the select button.
●
Appears when you set the power mode to VEHICLE
OFF, if the rear doors were opened shortly before or
after the vehicle was powered on.
●
Check the rear seat for passengers or items before
exiting the vehicle.
2
•
Appears when you press the
(
P
button but it is not
engaged due to low ATF temperature.
•
Depress the brake pedal until this message disappear.
•
Appears when depressing the accelerator pedal
while the gear position is in
(
N
.
•
Remove your foot from the accelerator pedal. When
driving, depress the brake pedal and change the gear
position.
•
Appears when you unlock and open the driver’s
door while the engine is running by remote engine
start.
2
P. 396
* Not available on all models
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст