Mitsubishi Colt Ralliart. Manual — part 433
ON-VEHICLE SERVICE
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-240
ON-VEHICLE SERVICE
CUSTOMISE FUNCTION
M1549002501444
Using M.U.T.-III adjusts the following function. The
programmed information is held even when the bat-
tery is disconnected.
• Vehicle speed-dependent wiper function
With the windshield wiper switch in the intermittent
position, the intermittent duration changes
depending on the intermittent adjusting knob
position and the vehicle speed.
• The selector "P" position-linked central door
unlocking function <CVT>
When the selector lever is shifted to the "P" position,
all the doors unlock.
• Turn-signal lamp operation sound function
Synchronized with the hazard lamp and the turn sig-
nal lamp, the buzzer sounds.
• Dimmer interior lamp control duration
When the door is closed with the ignition switch
LOCK (OFF), the interior lamp is turned OFF
automatically in the specified time.
• Timer lock time after executing the keyless entry
unlock
If any door including a tailgate is not opened after
being unlocked with the keyless transmitter,
doors are locked automatically within the speci-
fied time.
• Door-ajar warning function
Driving with any door, including a tailgate, not prop-
erly closed sounds the buzzer to let the driver
know the door-ajar state.
• Rear wiper intermittent duration
When the rear wiper switch is turned ON, the rear
wiper operates in the intermittent action. When
the rear wiper switch is turned from OFF to ON
two cycles, the rear wiper makes continuous
operation regardless of the intermittent operation
duration setting.
• Wiper linked with washer function
When this function is active, the windshield wiper
operates if the washer switch is turned ON.
• Hazard answer back function of the keyless entry
system
When lock/unlock is operated with the keyless entry
transmitter, the horn sounds so that the driver can
recognize the lock/unlock status of the vehicle
even if the driver is away from it.
• Initialising all functions (Returning to the initial
condition)
All adjusting functions are returned to the settings at
the time of factory shipment.
Item
No.
Items shown
on M.U.T.-III
screen
Item
Adjustment items
shown on M.U.T.-III
screen
Adjusting contents
4
SPEED SEN
WIP
Vehicle
speed-dependent
wiper function
W.FUNCTION
With function (Initial setting)
W/O FUNCTION
Without function
9
KEYLESS(HA
ZD)
Hazard answer
back function of
the keyless entry
system
LOCK/UNLOCK
With function for lock/unlock (the initial
condition)
LOCKED
With function only for lock
UNLOCKED
Without function only for unlock
W/O FUNCTION
Without function
14
P UNLOCK
ACT.
Door unlock
function linked
with "P" position
shift for centre
door lock system
W.FUNCTION
With function
W/O FUNCTION
Without function (the initial condition)
15
T/SIG.BUZZE
R
Turn-signal lamp
operation sound
function
W.FUNCTION
With function
W/O FUNCTION
Without function (the initial condition)
Main
Index
Group
TOC
ON-VEHICLE SERVICE
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-241
16
RM LMP TN
OFF
Dimmer interior
lamp control
duration
60s
60 seconds
30s
30 seconds
15s
15 seconds (the initial condition)
7.5s
7.5 seconds
W/O FUNCTION
0 second (no delay action)
24
KEYLES
LOCK T
Timer lock time
after executing the
keyless entry
unlock
30s
30 seconds (the initial condition)
60s
1 minute
120s
2 minutes
180s
3 minutes
26
DOOR WARN
BUZ
Door-ajar warning
function
W.FUNCTION
With function (Initial setting)
W/O FUNCTION
Without function
28
R.INT WIPER
T
Rear wiper
intermittent
duration
8s
8 seconds: Without continuous
operation (Initial setting)
4s(W SUCSSON)
4 seconds: With continuous operation
8s(W SUCSSON)
8 seconds: With continuous operation
16s(W SUCSSON)
16 seconds: With continuous operation
CONTIN ACTION
Continuous operation (without the
intermittence)
37
WIP SYCR
WASH
Wiper linked with
washer function
W.FUNCTION
With function (Initial setting)
W/O FUNCTION
Without function
38
KEYLES
HAZARD
Customise
function for
changing the
number of the
keyless hazard
warning lamp
answerback
flashing
LOCK1,UNLOCK2
LOCK: Flash once, UNLOCK: Flash
twice (Initial setting)
Whether the lamps flash or not is
determined by the keyless hazard
warning lamp answerback
customisation function.
LOCK2,UNLOCK1
LOCK: Flash twice, UNLOCK: Flash
once
Whether the lamps flash or not is
determined by the keyless hazard
warning lamp answerback
customisation function.
39
TURN-SIGNA
L
Turn signal lamp
operation
condition
adjustment
function
IG-ON
Turn signal lamp can be operated when
the ignition switch is turned ON (Initial
setting).
IG-ACC
Turn signal lamp can be operated when
the ignition switch 1 is in ACC or ON
position.
Item
No.
Items shown
on M.U.T.-III
screen
Item
Adjustment items
shown on M.U.T.-III
screen
Adjusting contents
Main
Index
Group
TOC
GROUP 37
POWER STEERING
CONTENTS
GENERAL INFORMATION . . . . . . . .
SERVICE SPECIFICATIONS. . . . . . .
SPECIAL TOOLS. . . . . . . . . . . . . . . .
TROUBLESHOOTING . . . . . . . . . . . .
DIAGNOSIS TROUBLESHOOTING
FLOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DIAGNOSTIC FUNCTION . . . . . . . . . . . . .
CHECK OF ELECTRIC POWER
STEERING WARNING LAMP. . . . . . . . . . .
DIAGNOSIS CODE CHART . . . . . . . . . . . .
DIAGNOSTIC TROUBLE CODE
PROCEDURES. . . . . . . . . . . . . . . . . . . . . .
TROUBLE SYMPTOM CHART. . . . . . . . . .
SYMPTOM PROCEDURES . . . . . . . . . . . .
DATA LIST REFERENCE TABLE . . . . . . .
ACTUATOR TEST REFERENCE TABLE. .
CHECK AT ELECTRIC POWER
STEERING-ECU . . . . . . . . . . . . . . . . . . . . .
ON-VEHICLE SERVICE. . . . . . . . . . .
STEERING WHEEL FREE PLAY
CHECK . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STEERING ANGLE CHECK . . . . . . . . . . . .
TIE ROD END BALL JOINT TURNING
TORQUE CHECK . . . . . . . . . . . . . . . . . . . .
CHECK OF STEERING FORCE TO
LOCK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STEERING WHEEL RETURN TO
CENTRE CHECK . . . . . . . . . . . . . . . . . . . .
TIE ROD END BALL JOINT DUST
COVER CHECK . . . . . . . . . . . . . . . . . . . . .
STEERING COLUMN SHAFT ASSEMBLY
SHOCK ABSORBING MECHANISM
CHECK . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STEERING WHEEL . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
STEERING SHAFT . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
DISASSEMBLY AND REASSEMBLY . . . . .
POWER STEERING GEAR BOX
AND LINKAGE . . . . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .
ELECTRIC POWER STEERING
CONTROL UNIT . . . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
Main
Index
GENERAL INFORMATION
POWER STEERING
37-2
GENERAL INFORMATION
M1372000100821
Electric power steering has been adopted in all vehi-
cles to make the steering system easier to handle.
FEATURES
• Teflon resin for reduced friction has been adopted
to the yoke bearing of steering gear and improve
the operation performance.
• Improved fuel consumption by reduction of
engine load, and weight saving by decrease of
the number of parts have been achieved with the
introduction of the electric power steering system.
• 3-spoke type steering wheel integrated with an
SRS air bag has been adopted.
• Impact-absorbing mechanism and tilt steering
mechanism have been adopted.
SPECIFICATIONS
Item
Specifications
Vehicles with
14-inch wheels
Vehicles with
15-inch wheels
Vehicles with
16-inch wheels
Steering wheel
Type
3-spoke type
Outside diameter mm
370
Maximum number of turns
3.4
3.2
2.6
Steering column
Column mechanism
Shock absorbing mechanism and tilt steering
mechanism
Power steering type
Electric powered type
Steering gear
Type
Rack and pinion
Stroke ratio (Rack
stroke/Steering wheel
maximum turning radius)
44.15
50.46
Rack stroke mm
150
143
130
Steering angle
Inner wheel
41
° 40’
39
° 00’
34
° 10’
Outer wheel
35
° 30’
33
° 40’
30
° 00’
Main
Index
Group
TOC
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст