Mitsubishi Colt Ralliart. Manual — part 393
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-80
Inspection Procedure D-4: Passenger's and/or rear power window(s) do not work by means of the
power window main switch.
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
POWER WINDOW
SUB SWITCH
(FRONT: LH)
POWER WINDOW
MOTOR
(FRONT: LH)
POWER
WINDOW
RELAY
POWER
WINDOW
MAIN SWITCH
(FRONT: LH)
LOCK SWITCH
Power Window (Front: LH) Circuit
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
Main
Index
Group
TOC
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-81
COMMENTS ON TROUBLE SYMPTOM
If the passenger's and/or rear power window does
not work by means of the power window main switch,
the power window main switch or the respective
power window sub switch(es) may be defective.
POSSIBLE CAUSES
• Malfunction of the power window main switch
• Malfunction of the power window sub switch
(front: LH), power window sub switch (rear: RH)
or power window sub switch (rear: LH)
• Damaged harness wires and connectors
DIAGNOSIS PROCEDURE
Step 1. Check the power window main switch.
Check that the driver's power window works by
means of the power window main switch.
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Refer to Inspection Procedure D-2 "Driver's
power window does not work by means of
the power window main switch
."
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
POWER WINDOW
SUB SWITCH
(REAR: LH)
REAR
POWER WINDOW
SUB SWITCH
(REAR: RH)
POWER
WINDOW
RELAY
POWER WINDOW MAIN SWITCH
LOCK
SWITCH
(REAR: LH)
(REAR: RH)
Power Window (Rear) Circuit
POWER WINDOW
MOTOR
(REAR: RH)
POWER WINDOW
MOTOR
(REAR: LH)
Main
Index
Group
TOC
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-82
Step 2. Check the power window sub switch.
Check that each power window works by means of
the respective power window sub switch when the
power window lock switch is turned off.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Refer to Inspection Procedure D-3
"Relevant power window(s) do not work by
means of the front and rear power window
sub switches
."
Step 3. Retest the system.
Check that the rear left power window works by
means of the power window main switch.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
).
NO :
Replace the power window main switch.
Inspection Procedure D-5: The power window timer function does not work normally.
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
If the power window timer function does not work
normally, these input signal circuit(s), the
ETACS-ECU may be defective.
POSSIBLE CAUSES
• Malfunction of the driver's door switch
• Malfunction of the passenger's door switch
• Malfunction of the ETACS-ECU
• Damaged harness wires and connectors
DIAGNOSTIC PROCEDURE
Step 1. ECU check by using the SWS monitor
Check that the power supply and earth lines to the
ETACS-ECU and the SWS communication lines are
normal.
• Ignition switch: ON
ECU TO BE CHECKED
• ETACS ECU
OK: "OK" is displayed on the "ETACS ECU"
menu.
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Refer to Inspection Procedure A-3
"Communication with the ETACS-ECU is
not possible
Step 2. SWS monitor data list
Check the SWS communication signal, which are
related to the power window timer function.
<Selected item> ETACS ECU
• Turn the ignition switch from the ON to the OFF
position.
• Driver's door: open
OK: Normal conditions are displayed for all
the items.
Q: Are the check results normal?
Normal conditions are displayed for all the items. :
Go to Step 3.
Normal condition is not displayed for item No.30 :
Refer to inspection procedure N-2 "The
ignition switch (IG1) signal is not received
."
Normal condition is not displayed for item No.32 :
Refer to inspection procedure N-3 "The
driver's door switch signal is not received
."
Item No.
Item name
Normal
condition
Item 30
IG SW IG1
OFF
Item 32
DR DOOR SW
ON
Main
Index
Group
TOC
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-83
Step 3. ETACS switch data by using the SWS
monitor
Check the SWS communication signal, which are
related to the power window timer function.
• Passenger’s door: Close → Open
OK: Normal condition is displayed.
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Refer to inspection procedure N-14 "The
passenger's door switch signal is not
received
."
Step 4. Retest the system
Check that the power window timer function works
normally.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
).
NO :
Replace the power window main switch.
Inspection Procedure D-6: The window glass lowers automatically while it is rising.
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
If the sliding resistance is too great when the window
is being raised or the window glass encounters an
object, the window glass will lower by approximately
150 mm.
POSSIBLE CAUSES
• Improper adjusted door window glass
• Incorrectly installed or warped glass slider
• Malfunction of the power window motor
• Malfunction of the window regulator
DIAGNOSIS PROCEDURE
Step 1. Check the power window operating
current.
Check that the power window operating current is
normal (Refer to GROUP 42
− Door − On-vehicle
service
).
Q: Is the check result normal?
YES :
Adjust the door window glass (Refer to
GROUP 42
− Door − On-vehicle service
), and then go to Step 2.
NO :
Replace the defective power window motor
assembly which operating current are
abnormal.
Step 2. Check that the door window glasses are
installed correctly.
Check that the door window glasses are installed
correctly. Refer to GROUP 42
− Door − On-vehicle
Service
.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Adjust the door window glass (Refer to
GROUP 42
− Door − On-vehicle service
).
Step 3. Retest the system.
Check that the power window does not lower auto-
matically while it is being raised.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
).
NO :
Replace the power window motor assembly
of the defective window.
Item No.
Item name
Normal
condition
Item 05
PASS DOOR SW
from OFF
to ON
Main
Index
Group
TOC
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст