Mitsubishi Colt Ralliart. Manual — part 387
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-56
Step 4. Check the wiring harness from B-132
ETACS-ECU connector terminal Nos.22 and 23 to
D-08 front door lock actuator (RH) connector
terminal Nos. 6 and 4.
NOTE:
Prior to the wiring harness inspection, check interme-
diate connector B-21, and repair if necessary.
• Check the input and output lines for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
).
NO :
Repair the wiring harness.
Step 5. Check the front door lock actuator (LH)
Check that the front door lock actuator (LH) works
normally. Refer to GROUP 42
− Door
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Replace the front door lock actuator (LH).
Step 6. Connector check: B-132 ETACS-ECU
connector, D-17 front door lock actuator (LH)
connector
Q: Is the check result normal?
YES :
Go to Step 7.
NO :
Repair the defective connector.
AC313872
Connector: B-132
AI
Harness side
Junction block (Rear view)
AC313880
Connector: D-08
AH
Harness side
D-08(B)
AC401055
Connector: B-21
AB
AC313872
Connector: B-132
AI
Harness side
Junction block (Rear view)
AC313886
Connector: D-17
AH
Harness side
D-17(B)
Main
Index
Group
TOC
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-57
Step 7. Check the wiring harness from B-132
ETACS-ECU connector terminal Nos.22 and 23 to
D-17 front door lock actuator (LH) connector
terminal Nos. 6 and 4.
NOTE:
Prior to the wiring harness inspection, check interme-
diate connector B-42, and repair if necessary.
• Check the input and output lines for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
).
NO :
Repair the wiring harness.
Step 8. Check the rear door lock actuator (RH)
Check that the rear door lock actuator (RH) works
normally. Refer to GROUP 42
− Door
Q: Is the check result normal?
YES :
Go to Step 9.
NO :
Replace the rear door lock actuator (RH).
Step 9. Connector check: B-132 ETACS-ECU
connector, D-06 rear door lock actuator (RH)
connector
Q: Is the check result normal?
YES :
Go to Step 10.
NO :
Repair the defective connector.
AC313872
Connector: B-132
AI
Harness side
Junction block (Rear view)
AC313886
Connector: D-17
AH
Harness side
D-17(B)
AC401053
Connector: B-42
AB
AC313872
Connector: B-132
AI
Harness side
Junction block (Rear view)
AC313882
Connector: D-06
AH
Harness side
D-06(B)
Main
Index
Group
TOC
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-58
Step 10. Check the wiring harness from B-132
ETACS-ECU connector terminal Nos.22 and 23 to
D-06 rear door lock actuator (RH) connector
terminal Nos. 6 and 4.
NOTE:
Prior to the wiring harness inspection, check interme-
diate connector C-01 and joint connector B-24, and
repair if necessary.
• Check the input and output lines for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
).
NO :
Repair the wiring harness.
Step 11. Check the rear door lock actuator (LH)
Check that the rear door lock actuator (LH) works
normally. Refer to GROUP 42
− Door
Q: Is the check result normal?
YES :
Go to Step 12.
NO :
Replace the rear door lock actuator (LH).
Step 12. Connector check: B-132 ETACS-ECU
connector, D-10 rear door lock actuator (LH)
connector
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Repair the defective connector.
AC313872
Connector: B-132
AI
Harness side
Junction block (Rear view)
AC313882
Connector: D-06
AH
Harness side
D-06(B)
AC401055
Connector: B-24
AC
AC401057
Connector: C-01
AB
AC313872
Connector: B-132
AI
Harness side
Junction block (Rear view)
AC313884
Connector: D-10
AH
Harness side
D-10(B)
Main
Index
Group
TOC
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-59
Step 13. Check the wiring harness from B-132
ETACS-ECU connector terminal Nos.22 and 23 to
D-10 rear door lock actuator (LH) connector
terminal Nos. 6 and 4.
NOTE:
Prior to the wiring harness inspection, check interme-
diate connector C-18, and repair if necessary.
• Check the input and output lines for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
).
NO :
Repair the wiring harness.
Step 14. Check the tailgate lock actuator
Check that the tailgate lock actuator works normally.
Refer to GROUP 42
− tailgate
Q: Is the check result normal?
YES :
Go to Step 15.
NO :
Replace the tailgate lock actuator.
Step 15. Connector check: B-132 ETACS-ECU
connector, E-05 tailgate lock actuator connector
Q: Is the check result normal?
YES :
Go to Step16.
NO :
Repair the defective connector.
AC313872
Connector: B-132
AI
Harness side
Junction block (Rear view)
AC313884
Connector: D-10
AH
Harness side
D-10(B)
AC401059
Connector: C-18
AB
AC313872
Connector: B-132
AI
Harness side
Junction block (Rear view)
AC401046
Connector: E-05
AB
Harness side
E-05(B)
Main
Index
Group
TOC
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст