Mitsubishi Colt Ralliart. Manual — part 390
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-68
Inspection Procedure D-2: Driver's power window does not work by means of the power window main
switch.
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
Power Window (Front: RH) Circuit
FUSIBLE
LINK
1
POWER
WINDOW
RELAY
ETACS-ECU
POWER
WINDOW
MAIN SWITCH
POWER WINDOW
MOTOR
(FRONT: RH)
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
IC
FRONT
(RH)
Main
Index
Group
TOC
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-69
COMMENTS ON TROUBLE SYMPTOM
If the driver's power window does not work by means
of the power window main switch, the power window
main switch or the driver's door power window motor
may be defective.
POSSIBLE CAUSES
• Malfunction of the power window main switch
• Malfunction of the power window motor (front:
RH)
• Damaged harness wires and connectors
DIAGNOSIS PROCEDURE
Step 1. Check the power window main switch.
Check that all of the front passenger's and rear door
power windows can operate by means of the power
window main switch.
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Refer to Inspection Procedure D-1 "Power
windows do not work at all
."
Step 2. Connector check: D-03 power window
main switch connector
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Repair the connector.
Step 3. Check the power window main switch.
Refer to GROUP 42
− Door
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Replace the power window main switch.
Step 4. Connector check: D-09 power window
motor (front: RH) connector
Q: Is the check result normal?
YES :
Go to Step 5.
NO :
Repair the connector.
Step 5. Check the power window motor (front:
RH).
Refer to GROUP 42
− Door
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Replace the power window motor (front:
RH).
AC313837
Connector: D-03
Harness side
AC
AC313880
Connector: D-09
AI
D-09(B)
Harness side
Main
Index
Group
TOC
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-70
Step 6. Check the wiring harness from D-09
power window motor (front: RH) connector
terminal Nos.1 and 2 to D-03 power window main
switch connector terminal Nos. 14 and 12.
• Check the input and output lines for open or short
circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
).
NO :
Repair the wiring harness.
AC313881
Connectors: D-03, D-09
AI
D-03
D-09(B)
D-03
D-09
Harness side
Harness side
Main
Index
Group
TOC
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-71
Inspection Procedure D-3: Relevant power window(s) do not work by means of the front and rear
power window sub switches.
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
POWER
WINDOW
MAIN
SWITCH
POWER
WINDOW
SUB SWITCH
(FRONT: LH)
POWER WINDOW
MOTOR
(FRONT: LH)
Power Window Sub Switch (Front: LH) Circuit
FUSIBLE
LINK
5
POWER
WINDOW
RELAY
ETACS-ECU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
Main
Index
Group
TOC
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст