Mitsubishi Colt Ralliart. Manual — part 530
TROUBLESHOOTING
HEATER, AIR CONDITIONER AND VENTILATION
55A-28
DIAGNOSIS PROCEDURE
Step 1. Connector check: A-130 A/C compressor
connector and A-08 engine-CVT-ECU
AC313811
Connector: A-08
AL
Harness side
A-08 (B)
AC313797
Connector: A-130
AB
Harness side
A-130 (B)
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Repair the connector.
Step 2. Voltage measurement at A-130 A/C
compressor connector.
AC313797
Connector: A-130
AB
Harness side
A-130 (B)
(1) Disconnect the connector, and measure at the
wiring harness side.
(2) Turn the ignition switch to the "ON" position.
AC313811
Connector: A-08
AL
Harness side
A-08 (B)
AC309471
AC309471
Connector A-08
(Harness side)
AL
(3) Disconnect engine-CVT-ECU connector A-08
and earth terminal 6.
AC310507
Connector A-130
(Harness side)
EY
(4) Voltage between terminal 1 and body earth.
OK: System voltage
Q: Is the check result normal?
YES :
Go to Step 9.
NO :
Go to Step 3.
Main
Index
Group
TOC
TROUBLESHOOTING
HEATER, AIR CONDITIONER AND VENTILATION
55A-29
Step 3. Connector check: B-104 A/C compressor
relay connector
AC313824
Connector: B-104
AF
Junction block side
Junction block (Front view)
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Repair the connector.
Step 4. Check the A/C compressor relay
continuity.
Refer to
.
Q: Is the A/C compressor relay in good condition?
YES :
Go to Step 5.
NO :
Replace the A/C compressor relay.
Step 5. Voltage measurement at B-104 A/C
compressor relay connector.
AC313824
Connector: B-104
AF
Junction block side
Junction block (Front view)
(1) Remove the relay, and measure at the junction
block side.
(2) Turn the ignition switch to the "ON" position.
AC310507
Connector B-104
(Junction block side)
EZ
(3) Voltage between terminal 1 and body earth.
OK: System voltage
AC310507
Connector B-104
(Junction block side)
FA
(4) Voltage between terminal 3 and body earth.
OK: System voltage
Q: Is the check result normal?
YES :
Go to Step 7.
NO :
Go to Step 6.
Main
Index
Group
TOC
TROUBLESHOOTING
HEATER, AIR CONDITIONER AND VENTILATION
55A-30
Step 6. Check the wiring harness between B-104
A/C compressor relay connector terminal No.1, 3
and the fusible link (6).
AC313825
Connectors: B-104, B-108
AF
Junction block side
Junction block (Front view)
B-104
B-108 (B)
B-104
Harness side
B-108
NOTE: Prior to the wiring harness inspection, check
junction block connectors C-108, and repair if neces-
sary.
• Check the A/C compressor relay power supply
line for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
Cope with Intermittent Malfunction
).
NO :
Repair the wiring harness.
Step 7. Check the wiring harness between B-104
A/C compressor relay connector terminal No.4
and A-130 A/C compressor connector terminal
No.1.
AC313797
Connector: A-130
AB
Harness side
A-130 (B)
AC313825
Connectors: B-104, B-112
AJ
B-112
B-112
B-104
Harness side
Junction block (Front view)
Junction block side
B-104
NOTE:
AC313811 AG
Connector: A-17
A-17 (B)
Prior to the wiring harness inspection, check interme-
diate connector A-17 and junction block connector
B-112, and repair if necessary.
• Check the A/C compressor relay power supply
line for open circuit.
Main
Index
Group
TOC
TROUBLESHOOTING
HEATER, AIR CONDITIONER AND VENTILATION
55A-31
Q: Is the check result normal?
YES :
Go to Step 8.
NO :
Repair the wiring harness.
Step 8. Check the wiring harness between B-104
A/C compressor relay connector terminal No.2
and A-08 A/C compressor assembly connector
terminal No.6.
AC313811
Connector: A-08
AL
Harness side
A-08 (B)
AC313825
Connectors: B-104, B-110
AK
B-110
B-110
B-104
Harness side
Junction block (Front view)
Junction block side
B-104
NOTE: Prior to the wiring harness inspection, check
junction block connector B-110, and repair if neces-
sary.
• Check the A/C compressor power supply line for
open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
Cope with Intermittent Malfunction
).
NO :
Repair the wiring harness.
Step 9. Check the magnetic clutch operation.
Refer to
.
Q: Can the sound of the magnetic clutch (click) be
heard?
YES :
Go to Step 10.
NO :
Replace the compressor magnet clutch.
Step 10. Check the refrigerant level.
Refer to
.
Q: Is the refrigerant level correct?
YES :
Go to Step 11.
NO :
Correct the refrigerant level (Refer to
Step 11. Replace the combination meter (meter
and A/C-ECU), and then recheck the trouble
symptom
Check that the compressor works normally.
Q: Is the check result normal?
YES :
This diagnosis is complete.
NO :
Replace the engine-CVT-ECU.
Main
Index
Group
TOC
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст