Mitsubishi 380. Manual — part 892
COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL
54A-102
1. Connect diagnostic tool MB991958 to the data link
connector.
2. Turn the ignition switch to "ON" position.
3. Select "CAN bus diagnosis" from the start-up screen.
4. When the vehicle information is displayed, confirm that it
matches the vehicle whose CAN bus lines will be
diagnosed.
• If they matches, go to step 8.
• If not, go to step 5.
5. Select "view vehicle information" button.
6. Enter the vehicle information and select the "OK" button.
7. When the vehicle information is displayed, confirm again
that it matches the vehicle whose CAN bus lines will be
diagnosed.
• If they matches, go to step 8.
• If not, go to step 5.
8. Select the "OK" button.
9. When the optional equipment is displayed, choose the one
which the vehicle is fitted with, and then select the "OK"
button.
CAUTION
During diagnosis, a DTC code associated with other sys-
tem may be set when the ignition switch is turned on with
connector(s) disconnected. On completion, confirm all
systems for DTC code(s). If DTC code(s) are set, erase
them all.
DTC NO.
Diagnostic item
REFERENCE PAGE
U1073
Bus off
U1100
Engine ECU time-out (related to engine)
U1101
Auto Transmission ECU time-out (related to A/T)
U1102
ABS-ECU time-out
U1109
ETACS-ECU time-out
U1112
SRS-ECU time-out
U1120
Failure information on Engine ECU (related to engine)
U1206
Flag invalid
00DB076A
MB991910
DATA LINK
CONNECTOR
MB991824
MB991827
COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL
54A-103
TROUBLE SYMPTOM CHECKS
BABFDEEC
16DB583A
CONNECTOR: C-211
SYMPTOM
INPUT WIRE
CONNECTOR
PIN
Meters do not illuminate or function
Battery (+12V)
1
-
-
2
Rheostat does not function
Earth
3
-
-
4
Gauges, trip computer and w/lamps inoperative
Earth
5
-
-
6
Brake warning lamp inoperative or constant
Park brake and brake fluid level
switch
7
Seat belt w/lamp inoperative or constant
Seat belt buckle switch
8
Oil w/lamp inoperative or constant
Oil pressure switch
9
-
-
10
Charge w/lamp inoperative or constant
Charge w/light signal (alternator)
11
Gauges and trip computer inoperative
Ignition (12V)
12
Fuel gauge reads "E". Range to empty displays "- -
-"
Fuel gauge sender unit
13
Fuel gauge, tachometer, speedometer,
temperature gauge, shift select display,,trip
computer, cruise, engine, door ajar,
indicator/hazard, fog, speed, rest reminder, SRS,
ABS, and TCL,
CAN HI
14
CAN LO
15
Mode select inoperative
Mode select switch
16
Mode select "up" inoperative
Mode "up" switch
17
Mode select "down" inoperative
Mode "down" switch
18
-
-
19
-
-
20
Meters do not illuminate
Illumination (+ve) taillamp relay
21
Illumination [rheostat output
(-ve)]
22
COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL
54A-104
SYMPTOM CHART
BABGIHHH
CAUTION
During diagnosis, a DTC code associated with
other system may be set when the ignition switch
is turned on with connector(s) disconnected. On
completion, confirm all systems for DTC code(s).
If DTC code(s) are set, erase them all.
SYMPTOM
INSPECTION
PROCEDURE
REFERENCE PAGE
Communication with diagnostic tool is not possible.
1
Power supply circuit.
2
Odometer and trip meter are not displayed.
3
All the needle meters do not work.
4
When the ignition switch is turned to the ON position, the
indicator and warning lights do not illuminate.
5
Speedometer does not work.
6
The fuel gauge needle moves excessively.
7
Tachometer does not work.
8
Fuel Gauge does not work (other meters work).
9
Engine coolant temperature gauge does not work (other meters
work).
10
COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL
54A-105
INSPECTION CHART FOR TROUBLE SYMPTOMS
BABEEEBJ
SYMPTOM
INSPECTION
PROCEDURE
Range to empty always displays flashing"---"km.
1
Range to empty does not detect refuels
2
Total fuel used does not operate. (increase)
3
Total fuel used displays abnormally low/high value
4
Average fuel always displays "0.1" litres/100 km
5
Average fuel displays abnormally low/high value
6
Instant fuel always displays "0.1" litres/100km
7
Instant fuel displays abnormally low/high result
8
Average fuel always displays "--.-" litres/100 km
9
Instant fuel always displays "--.-" litres/100 km
10
Total distance travelled does not operate (increase)
11
Average fuel always displays "- -. -" km/h
12
Rest reminder does not function
13
Service reminder does not function
14
Speed alarm warning "Beeps" do not trigger
15
Speed alarm cannot be adjusted and/or turned off and/or
operating mode cannot be changed
16
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст