Mitsubishi 380. Manual — part 654
DIAGNOSIS
CONTROLLER AREA NETWORK (CAN)
54C-27
<Comment>
Harness disconnection or loose connection in red
displayed area is
estimated.
Diagnostic Item 9
Diagnose the lines between CAN main
bus line and the Engine-ECU.
<Comment>
Harness disconnection or loose connection in red
displayed area is
estimated.
Diagnostic Item 12
Diagnose the lines between CAN main
bus line and the A/T-ECU.
MUT-III SCREEN
DIAGNOSIS DETAILS
REFERENCE
PAGE
16DB385A
: Red section on screen
ETACS
-ECU
AC-ECU
SRS-ECU
C.DISPLAY
MUT
J/C
ABS-ECU
METER
-ECU
ENGINE
-ECU
A/T-ECU
16DB386A
: Red section on screen
ETACS
-ECU
AC-ECU
SRS-ECU
C.DISPLAY
MUT
J/C
METER
-ECU
A/T-ECU
ABS-ECU
ENGINE
ECU
DIAGNOSIS
CONTROLLER AREA NETWORK (CAN)
54C-28
<Comment>
Harness disconnection or loose connection in red
displayed area is
estimated.
Diagnostic Item 11
Diagnose the lines between CAN main
bus line and the ABS-ECU.
<Comment>
Harness disconnection or loose connection in red
displayed area is
estimated.
Diagnostic Item 14
Diagnose the lines between CAN main
bus line and the ETACS-ECU.
MUT-III SCREEN
DIAGNOSIS DETAILS
REFERENCE
PAGE
16DB387A
: Red section on screen
ETACS
-ECU
AC-ECU
SRS-ECU
C.DISPLAY
MUT
J/C
ABS-ECU
METER
-ECU
ENGINE
-ECU
A/T-ECU
16DB388A
: Red section on screen
ETACS
-ECU
AC-ECU
SRS-ECU
C.DISPLAY
MUT
J/C
METER
-ECU
ENGINE
-ECU
ABS-ECU
A/T-ECU
DIAGNOSIS
CONTROLLER AREA NETWORK (CAN)
54C-29
<Comment>
Harness disconnection or loose connection in red
displayed area is
estimated.
Diagnostic Item 13
Diagnose the lines between CAN main
bus line and the multi-center display
<Comment>
Harness disconnection or loose connection in red
displayed area is
estimated.
Diagnostic Item 16
Diagnose the lines between CAN main
bus line and the A/C-ECU.
MUT-III SCREEN
DIAGNOSIS DETAILS
REFERENCE
PAGE
16DB389A
: Red section on screen
ETACS
-ECU
AC-ECU
SRS-ECU
C.DISPLAY
MUT
J/C
METER
-ECU
ENGINE
-ECU
ABS-ECU
A/T-ECU
16DB390A
: Red section on screen
ETACS
-ECU
AC-ECU
SRS-ECU
C.DISPLAY
MUT
J/C
METER
-ECU
ENGINE
-ECU
ABS-ECU
A/T-ECU
DIAGNOSIS
CONTROLLER AREA NETWORK (CAN)
54C-30
NOTE: If the screen other than above is displayed,
troubles are present at two or more spots. In this
case, diagnose CAN bus lines by referring to the
trouble spot pinpoint procedures.
NOTE: If a trouble cannot be solved after performing
the diagnosis other than item 16, diagnose CAN bus
line thoroughly.
NOTE: all screens above appear with vehicles incor-
porating automatic transmisssion ECU, therefore
when diagnosing can bus on vehicles with manual
transmission (M/T), the A/T ECU will not be dis-
played on screens.
<Comment>
Harness disconnection or loose connection in red
displayed area is
estimated.
Diagnostic Item 15
Diagnose the lines between CAN main
bus line and the SRS-ECU.
<Comment>
Harness disconnection or loose connection in red
displayed area is
estimated.
Diagnostic Item 16
Diagnose the lines between CAN main
bus line and the combination meter.
MUT-III SCREEN
DIAGNOSIS DETAILS
REFERENCE
PAGE
16DB391A
: Red section on screen
ETACS
-ECU
AC-ECU
SRS-ECU
C.DISPLAY
MUT
J/C
METER
-ECU
ENGINE
-ECU
ABS-ECU
A/T-ECU
16DB392A
: Red section on screen
AC-ECU
SRS-ECU
C.DISPLAY
MUT
J/C
METER
-ECU
ENGINE
-ECU
ABS-ECU
ETACS
-ECU
A/T-ECU
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст