Mitsubishi 380. Manual — part 465
![](/vehicles/winoney/bby/jito/kent.png)
AK300229AD
4
3
2
1
TRANSMISSION
AUTOMATIC TRANSMISSION OVERHAUL
23B-20
17.Remove each accumulator piston and spring.
Number
Name
1
For low-reverse brake
2
For underdrive clutch
3
For second brake
4
For overdrive clutch
AK202102
18.Remove the reduction brake accumulator cover
after removing the snap ring, then remove the
spring and piston.
AK300230
Parking pawl rod
Manual control
lever shaft roller
Manual control
lever shaft
AC
19.Remove the manual control lever shaft roller.
20.Remove the manual control lever shaft and the
parking pawl rod.
AK202103
21.Remove the torque converter housing mounting
bolts (twenty pieces), and then remove the torque
converter housing.
AK300232 AB
O-rings
22.Remove the O-rings (two pieces).
23.Remove the differential bearing outer race and
spacer from the converter housing.
AK301866
24.Remove the differential.
AK300234
![](/vehicles/winoney/bby/jito/zite.png)
TRANSMISSION
AUTOMATIC TRANSMISSION OVERHAUL
23B-21
25.Remove the oil filter.
AK202215
Pipe
AB
26.Remove the pipe clamp bolts (two places).
AK300235
27.Remove the oil pump mounting bolts (six pieces).
AK300236AD
MD998333
28.Place special tool Oil pump remover (MD998333)
as shown in the drawing.
29.Turn special tool Oil pump remover (MD998333)
to remove the oil pump.
30.Remove the oil pump gasket.
AK300237
31.Remove thrust washer #1.
AK300238
32.Holding the input shaft, remove the underdrive
clutch and input shaft.
AK300239
33.Remove thrust bearing #2.
AK300240
34.Remove the underdrive clutch hub.
![](/vehicles/winoney/bby/jito/nappon.png)
AK202112
TRANSMISSION
AUTOMATIC TRANSMISSION OVERHAUL
23B-22
35.Remove the reduction brake piston cover after
removing the snap ring.
36.Remove the reduction brake piston and spring
after removing the snap ring.
AK300241
37.Remove the parking pawl shaft, and then remove
the spacer and spring.
AK300242
38.Remove the parking roller support shafts (two
pieces), and then remove the parking pawl and
parking roller support.
AK202113
39.Remove the direct planetary carrier assembly.
AK202114AB
Anchor plug
40.Remove the anchor plug and O-ring.
AK202116
41.Remove the direct clutch.
AK202117
42.Remove the reduction brake band.
![](/vehicles/winoney/bby/jito/fro.png)
AK202118
AK
AD
Thrust bearing #11
Thrust race #12
TRANSMISSION
AUTOMATIC TRANSMISSION OVERHAUL
23B-23
43.Remove the thrust bearing #11 and thrust race
#12.
AK300463
44.Remove the rear cover.
45.Remove the thrust race #8.
46.Remove the seal rings (four pieces).
47.Remove the input shaft rear bearing.
AK202120
48.Remove the O-rings (six pieces).
AK202121AB
Direct clutch
accumulator piston
49.Remove the direct clutch accumulator piston and
spring after removing the O-ring.
AK300465
50.Remove the reverse and overdrive clutch and
thrust bearing #7.
AK300466
51.Remove overdrive clutch hub and thrust bearing
#6.
AK300467
52.Remove thrust bearing #5.
AK300468
53.Remove the planetary reverse sun gear.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст