Mitsubishi 380. Manual — part 145
NOTES
90-1
GROUP 90
CIRCUIT DIAGRAMS
CONTENTS
HOW TO READ CIRCUIT DIAGRAMS
JUNCTION BLOCK . . . . . . . . . . . . . .
JOINT CONNECTOR . . . . . . . . . . . . .
CENTRALISED JUNCTION. . . . . . . .
POWER DISTRIBUTION SYSTEM . .
STARTING SYSTEM . . . . . . . . . . . . .
IGNITION SYSTEM . . . . . . . . . . . . . .
CHARGING SYSTEM . . . . . . . . . . . .
MULTIPOINT FUEL INJECTION (MPI)
SYSTEM . . . . . . . . . . . . . . . . . . . . . . .
COOLING SYSTEM . . . . . . . . . . . . . .
INVECS-II 5A/T . . . . . . . . . . . . . . . . .
HEADLAMPS . . . . . . . . . . . . . . . . . . .
TAIL LAMP, POSITION LAMP, AND
LICENCE PLATE LAMP . . . . . . . . . .
FOG LAMPS . . . . . . . . . . . . . . . . . . .
FRONT DOME LAMP, REAR DOME LAMP,
TRUNK LAMP AND IGNITION KEY HOLE
ILLUMINATION LAMP . . . . . . . . . . . .
GLOVE BOX LAMP . . . . . . . . . . . . . .
VANITY MIRROR LAMP. . . . . . . . . . .
TURN-SIGNAL LAMP AND HAZARD
WARNING LAMP . . . . . . . . . . . . . . . .
BACKUP LAMP . . . . . . . . . . . . . . . . .
STOPLAMP. . . . . . . . . . . . . . . . . . . . .
HORN . . . . . . . . . . . . . . . . . . . . . . . . .
METER AND GAUGE . . . . . . . . . . . . .
BRAKE WARNING LAMP, OIL
PRESSURE WARNING LAMP, FUEL
WARNING LAMP . . . . . . . . . . . . . . . .
POWER WINDOWS . . . . . . . . . . . . . .
CENTRAL DOOR LOCKING
SYSTEM . . . . . . . . . . . . . . . . . . . . . . .
Continued on next page
CIRCUIT DIAGRAMS
90-2
AUTOMATIC AIR CONDITIONING
SYSTEM . . . . . . . . . . . . . . . . . . . . . . .
WINDSHIELD WIPER AND WASHER
REAR WINDOW DEFOGGER . . . . . .
REMOTE CONTROLLED MIRROR. .
AUDIO SYSTEM . . . . . . . . . . . . . . . .
ACCESSORY SOCKET . . . . . . . . . . .
CLOCK DISPLAY . . . . . . . . . . . . . . .
MULTI-CENTER DISPLAY . . . . . . . .
SUNROOF . . . . . . . . . . . . . . . . . . . . .
AUTO-CRUISE CONTROL SYSTEM
ANTI-LOCK BRAKING SYSTEM (ABS)
<VEHICLES WITHOUT TRACTION
CONTROL (TCL)> . . . . . . . . . . . . . . .
ANTI-LOCK BRAKING SYSTEM (ABS)
<VEHICLES WITH TRACTION
CONTROL (TCL)> . . . . . . . . . . . . . . .
SUPPLEMENTAL RESTRAINT
SYSTEM (SRS) . . . . . . . . . . . . . . . . . .
ENGINE IMMOBILISER SYSTEM . . .
POWER SEAT WITH MEMORY
(DRIVER). . . . . . . . . . . . . . . . . . . . . . .
POWER SEAT (8-WAY)
(DRIVER AND PASSENGER) . . . . . .
POWER SEAT [(6-WAY) DRIVER] . .
FORGOTTEN KEY PREVENTION
FUNCTION . . . . . . . . . . . . . . . . . . . . .
LIGHTING MONITOR TONE ALARM
IGNITION KEY REMINDER TONE
ALARM . . . . . . . . . . . . . . . . . . . . . . . .
SEAT BELT WARNING TONE
ALARM . . . . . . . . . . . . . . . . . . . . . . . .
DOOR AJAR WARNING TONE
ALARM . . . . . . . . . . . . . . . . . . . . . . . .
RHEOSTAT. . . . . . . . . . . . . . . . . . . . .
CONTROLLER AREA NETWORK
(CAN) . . . . . . . . . . . . . . . . . . . . . . . . .
HOW TO READ CIRCUIT DIAGRAMS
CIRCUIT DIAGRAMS
90-3
HOW TO READ CIRCUIT DIAGRAMS
M1901000100704
The circuit of each system from the fuse (or fusible link) to ground is shown. The power supply is shown at
the top and the ground at the bottom to facilitate understanding of how the current flows. Some variations are
included in one circuit diagram.Accordingly, some diagrams may not be applicable for individual vehicles.
36DB001A
Indicates power source.
Indicates that terminal is conne-
cted via a plate in the relay box.
Each circuit diagram consists of
block(s). The blocks are divided
by page number.
Indicates the circuit name to be
connected. The arrow indicates
the current flow direction.
Indicates the power supply in
the control unit. If no voltage is
displayed, this indicates battery
positive voltage.
An "X" at the end of a connector
number indicates that the conn-
ector is connected to a central-
ised junction that is shown in the
section "Centralised Junction."
Indicates the connector symbol.
Connectors in the circuit diagram
are indicated in numerical order.
Indicates connector number.
The same number is used in the
wiring harness diagram.
Connector and connector numbers
are shown at the lower part of the
page.
Connector numbers not enclosed
by frame indicate the device incor-
porated into wiring harness.
Indicates the circuit name
to be connected. The arrow
indicates the current flow
direction.
Indicates that the diagram contin-
ues at which belongs to the
block in the same circuit.
One-directional arrow indicate
that current flows upwards.
Indicates shield wire.
Indicates the operating conditions
of the engine coolant switch, etc.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст