Mitsubishi 380. Manual — part 310
VEHICLE IDENTIFICATION
GENERAL
00-18
VEHICLE IDENTIFICATION
VEHICLE IDENTIFICATION NUMBER
M1001000401028
The vehicle identification number (VIN) is stamped on the
bulkhead in the engine compartment and also on the compli-
ance plate itself. It provides information for vehicle identification
purposes and should be quoted when ordering parts or in any
correspondence related to the vehicle
00DB078A
VEHICLE IDENTIFICATION
NUMBER (VIN)
NO.
ITEM
CONTENT
1
Geographic Area
6: Australia
2
Country within
Geographic area
M: Australia
3
Manufacturer
M: Mitsubishi Motors
4
Car line
D: 380
5
Series
B: Series
6
Engine/
Transmission
combinations
1: 3.8 litre MPI <unleaded fuel>
(5-speed manual)
4: 3.8 litre MPI <unleaded fuel>
(5-speed A/T)
7
Price class
D: 380
V: 380VRX
X: 380GT
H: 380LS, 380LX(full option pack)
8
Body Type
41: Sedan
9
Year
5: 2005
10
Assembly Plant
T: Tonsley Park
11
Body number
000001 to 999999
00DB091A
1 2 3 4 5 6 7
8 9 10
11
6 M M D B 4 X 41 5 T 000001
VEHICLE IDENTIFICATION
GENERAL
00-19
VEHICLE INFORMATION NUMBER LIST
NOTE: ** = Becomes 380LX as a full option pack.
VEHICLE COMPLIANCE PLATE
The Compliance Plate is attached to the bulkhead
(adjacent to the Data Plate) in the engine compart-
ment and must never be removed from the vehicle
All vehicles are manufactured to confirm to specific
safety, environmental or consumer protective
requirements as defined by the Australian Design
Rules (ADR).
DL1ASNLERJ
DL1ASYLERJ
DL1ASNHERJ
DL1ASYHERJ
DL1ASYXERJ
DL1ASYDERJ
380 5M/T
SEDAN
380 5A/T
SEDAN
380VRX 5M/T
SEDAN
380VRX 5A/T
SEDAN
380GT 5A/T
SEDAN
380LS** 5A/T
SEDAN
DB1D41
DB4D41
DB1V41
DB4V41
DB4X41
DB4H41
00DB092A
VEHICLE COMPLIANCE
PLATE
VEHICLE IDENTIFICATION
GENERAL
00-20
VEHICLE DATA PLATE
M1001005400707
The vehicle data plate is attached on the bulk-
head, between the vehicle identification number (VIN) and the
compliance plate at the top outer panel in the engine compart-
ment.
The plate shows vehicle option codes, trim codes and a daily
body sequential build number.
AUSTRALIAN DESIGN RULES
Australian Design Rules require the manufacturer of components and/ or a complete vehicle to conform to
specific safety, environmental or consumer protective requirements as defined by that particular rule. There is
legislation that requires, amongst other things that no modifications be made to a vehicle that would cause
that vehicle not to comply with the Design Rules of that vehicle (parts replacement using approved Mitsubishi
Motors Australia Limited components is permissible). Before interchanging or adding optional equipment or
using non-Genuine Parts, it is recommended that advice be sought from an Authorised Mitsubishi Motors
Australia Limited Dealer or from a Mitsubishi Motors Australia Limited Regional Office, because it is possible
to inadvertently cause a vehicle not to comply with a Design Rule.
00DB090A
VEHICLE DATA
PLATE
VEHICLE IDENTIFICATION
GENERAL
00-21
OPTION CODES (380 Series)
EXPORT CODES
TYRE AND LOADING INFORMATION PLACARD
The tyre and loading information placard is located on the
inside sill of the driver’s door.
OPTION CODE:
ITEM
G39
Sunroof
C73
Leather (380 VRX)
J40
Traction Control
W51
16" Alloy Wheels
W54
17" Alloy Wheels + Sports Suspension + Strut Tower Bar
R06
Satellite Navigation Accommodation Package
J07
LX MARK (Only in combination with G39, C78, K40, W54) on
380-LS model
G39, C73
Sunroof + Leather
J40, W51
Traction Control + 16" Alloy Wheels
C78, K40
Leather (380 LS) + Power Seats
G05, J06
ECM + Vanity Mirror Lamp
J40, W51, G39
Traction Control + 16 " Alloy Wheels + Sunroof
G39, C78, K40
Sunroof + Leather (380 LS) + Power Seats
G39, C78, K40, W54
Sunroof + Leather (380 LS) + Power Seats + 17" Alloy Wheels +
Sports Suspension + Strut Tower Bar
G39, C78, K40, W54,
J07
Sunroof + Leather (380 LS) + Power Seats + 17" Alloy Wheels +
Sports Suspension + Strut Tower Bar + LX Badging
OPTION
CODE
ITEM
X71
Fiji
X62
New Zealand
A18
Export Preparation (wax and brake bags)
X30
Brunei
00DB095A
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст