Mitsubishi ASX (2018 year). Instruction — part 24
![](/vehicles/winoney/cheloussagin/dakalon/yord.png)
CAUTION
Therefore:
•
Maintain a distance of approx. 70 cm or
more between the vehicle body and the
washing nozzle.
•
When washing around the door glass,
hold the nozzle at a distance of more than
70 cm and at right angles to the glass sur-
face.
l
After washing the vehicle, drive the vehicle
slowly while lightly depressing the brake
pedal several times in order to dry out the
brakes.
Leaving the brakes wet could result in re-
duced braking performance. Also, there is a
possibility that they could freeze up or be-
come inoperative due to rust, rendering the
vehicle unable to move.
l
When using an automatic car wash, pay at-
tention to the following items, referring to
the operation manual or consulting a car
wash operator. If the following procedure is
not followed, it could result in damage to
your vehicle.
•
The outside mirrors are retracted.
•
The wiper arms are secured in place with
tape.
•
If your vehicle is equipped with a rear
spoiler or roof rails, consult a car wash
operator before using the car wash.
•
If your vehicle has rain sensor wipers,
place the wiper switch lever in the “OFF”
position to deactivate the rain sensor.
During cold weather
Salt and other chemicals spread on the roads
in some areas in winter can have a harmful
effect on the vehicle body. You should there-
fore wash the vehicle as often as possible in
accordance with our care-instructions. It is
recommended to have a preservative applied
and the underfloor protection checked before
and after the cold weather season.
After washing your vehicle, wipe off all wa-
terdrops from the rubber parts around the
doors to prevent the doors from freezing.
NOTE
l
To prevent freezing of the weatherstripping
on the doors, bonnet, etc., they should be
treated with silicone spray.
Waxing
E00901000863
Waxing the vehicle will help prevent the ad-
herence of dust and road chemicals to the
paintwork. Apply a wax solution after wash-
ing the vehicle, or at least once every three
months to assist displacing of water.
Do not wax your vehicle in direct sunlight.
You should wax after the surfaces have
cooled.
CAUTION
l
Waxes containing high abrasive compounds
should not be used. Such waxes remove rust
and stains effectively from the paintwork but
they are harmful to the lustre on the painted
surface and the plated surface.
Further, they are harmful to glossy surfaces
such as grille, garnish, mouldings, etc.
l
Do not use petrol or paint thinners to remove
road tar or other contamination to the pain-
ted surface.
l
Do not apply wax to sections that have a
black mat paint coating, as doing so could
cause uneven discolouration, spots or stains.
If wax gets on such areas, wipe it off using
lukewarm water and a soft cloth.
Polishing
E00901100066
The vehicle should only be polished if the
paintwork has become stained or lost its lus-
tre. Do not polish parts with a mat coating
and the plastic bumpers. Doing so could
cause stains or damage the finish.
Cleaning plastic parts
E00901300707
Use a sponge or chamois leather.
If a car wax adheres on a grey or black rough
surface of the bumper, moulding or lamps,
the surface becomes white. In such a case,
wipe it off using lukewarm water and soft
cloth or chamois leather.
Cleaning the exterior of your vehicle
9-04
OGAE18E1
Vehicle care
9
![](/vehicles/winoney/cheloussagin/dakalon/moreng.png)
CAUTION
l
Do not use a scrubbing brush or other hard
tools as they may damage the plastic part
surface.
l
Do not use wax containing compound (pol-
ishing powder) which may damage the plas-
tic part surface.
l
Do not bring the plastic parts into contact
with petrol, light oil, brake fluids, engine
oils, greases, paint thinners, and sulphuric
acid (battery electrolyte) which may crack,
stain or discolour the plastic parts.
If they touch the plastic parts, wipe them off
with soft cloth, chamois or the like and an
aqueous solution of neutral detergent then
immediately rinse the affected parts with
water.
Chrome parts
E00901400098
In order to prevent spots and corrosion of
chrome parts, wash with water, dry thorough-
ly, and apply a special protective coating.
This should be done more frequently in win-
ter.
Aluminium wheels*
E00901500347
1. Remove dirt using a sponge while sprin-
kling water on the vehicle.
2. Use neutral detergent on any dirt that
cannot be removed easily with water.
Rinse off the neutral detergent after
washing the vehicle.
3. Dry the vehicle thoroughly using a cha-
mois leather or a soft cloth.
CAUTION
l
Do not use a brush or other hard implement
on the wheels.
Doing so could scratch the wheels.
l
Do not use any cleaner that contains an abra-
sive substance or is acidic or alkaline. Doing
so could cause the coating on the wheels to
peel or become discoloured or stained.
l
Do not directly apply hot water using a
steam cleaner or by any other means.
l
Contact with seawater and road deicer can
cause corrosion. Rinse off such substances
as soon as possible.
Window glass
E00901600117
The window glass can normally be cleaned
using only a sponge and water.
Glass cleaner can be used to remove oil,
grease, dead insects, etc. After washing the
glass, wipe dry with a clean, dry, soft cloth.
Never use a cloth that is used for cleaning a
painted surface to clean a window. Wax from
the painted surface could get on the glass and
lower glass transparency and visibility.
NOTE
l
To clean the inside of the rear window, al-
ways use a soft cloth and wipe the window
glass along the demister heater element so as
not to cause damage.
Wiper blades
E00901700062
Use a soft cloth and glass cleaner to remove
grease, dead insects, etc., from the wiper
blades. Replace the wiper blades when they
no longer wipe properly. (Refer to page
10-17.)
Engine compartment
E00902100308
Clean the engine compartment at the begin-
ning and end of winter. Pay particular atten-
tion to flanges, crevices and peripheral parts
where dust containing road chemicals and
other corrosive materials might collect.
If salt and other chemicals are used on the
roads in your area, clean the engine compart-
ment at least every three months.
Never spray or splash water on the electrical
components in the engine compartment, as
this may cause damage.
Do not bring the nearby parts, the plastic
parts and so on into contact with sulphuric
acid (battery electrolyte) which may crack,
stain or discolour them.
Cleaning the exterior of your vehicle
9-05
OGAE18E1
Vehicle care
9
![](/vehicles/winoney/cheloussagin/dakalon/oue.png)
If they are in contact, wipe off with soft
cloth, chamois or the like and an aqueous sol-
ution of neutral detergent then immediately
rinse the affected parts with plenty of water.
Cleaning the exterior of your vehicle
9-06
OGAE18E1
Vehicle care
9
![](/vehicles/winoney/cheloussagin/dakalon/uper.png)
Service precautions. . . . . . . . . . . . . . . . . . ... 10-02
Catalytic converter. . . . . . . . . . . . . . . . . . . 10-03
Bonnet. . . . . . . . . . . . . . . . . . . . . . . ... 10-03
Engine oil. . . . . . . . . . . . . . . . . . . . . . .. 10-05
Engine coolant. . . . . . . . . . . . . . . . . . . . ...10-07
Washer fluid. . . . . . . . . . . . . . . . . . . . . ..10-08
Brake fluid/Clutch fluid*. . . . . . . . . . . . . . . . .. 10-09
Battery. . . . . . . . . . . . . . . . . . . . . . . ...10-09
Tyres. . . . . . . . . . . . . . . . . . . . . . . . ..10-13
Wiper blade rubber replacement. . . . . . . . . . . . . ... 10-17
General maintenance. . . . . . . . . . . . . . . . . . .10-18
For cold and snowy weather. . . . . . . . . . . . . . . . 10-19
Fusible links. . . . . . . . . . . . . . . . . . . . . .. 10-19
Fuses. . . . . . . . . . . . . . . . . . . . . . . . ..10-19
Replacement of lamp bulbs. . . . . . . . . . . . . . . ...10-26
Maintenance
OGAE18E1
10
![](/vehicles/winoney/cheloussagin/dakalon/peou.png)
Service precautions
E01000102553
Adequate care of your vehicle at regular in-
tervals serves to preserve the value and ap-
pearance as long as possible.
Maintenance items as described in this own-
er’s manual can be performed by the owner.
We recommend you to have the periodic in-
spection and maintenance performed by a
MITSUBISHI MOTORS Authorized Service
Point or another specialist.
In the event a malfunction or a problem is
discovered, we recommend you to have it
checked and repaired. This section contains
information on inspection maintenance pro-
cedures that you can do yourself. Follow the
instructions and cautions for each of the vari-
ous procedures.
A- Cooling fans
B- Caution label
*: Front of the vehicle
WARNING
l
When checking or servicing the inside of
the engine compartment, make sure the
engine is switched off and has had a
chance to cool down.
WARNING
l
If it is necessary to do work in the engine
compartment with the engine running, be
especially careful that your clothing, hair,
etc., does not become caught by the fan,
drive belts, or other moving parts.
l
After performing the maintenance, make
sure that no tools or cloths are left behind
in the engine compartment.
If they are left behind, a fire or damage to
the vehicle may occur.
l
The fan may turn on automatically even if
the engine is not running. Turn the igni-
tion switch to the “LOCK” position or put
the operation mode in OFF to be safe
while you work in the engine compart-
ment.
l
Do not smoke, cause sparks or allow open
flames around fuel or battery. The fumes
are flammable.
l
Be extremely cautious when working
around the battery. It contains poisonous
and corrosive sulphuric acid.
l
Do not get under your vehicle with just
the body jack supporting it. Always use
automotive jack stands.
l
Improper handling of components and
materials used in the vehicle can endanger
your personal safety. We recommend you
to consult a specialist for necessary infor-
mation.
Service precautions
10-02
OGAE18E1
Maintenance
10
![](/vehicles/winoney/cheloussagin/dakalon/talwodora.png)
Catalytic converter
E01000202642
The exhaust gas scavenging devices used
with the catalytic converter are extremely ef-
ficient for the reduction of noxious gases.
The catalytic converter is installed in the ex-
haust system.
It is important to keep the engine properly
tuned to ensure proper catalyst operation and
prevent possible catalyst damage.
WARNING
l
As with any vehicle, do not park or oper-
ate this vehicle in areas where combusti-
ble materials such as dry grass or leaves
can come in contact with a hot exhaust
since a fire could occur.
l
Paint should not be applied to the catalyt-
ic converter.
NOTE
l
Use fuel of the type recommended in “Fuel
selection” on page 2-02.
Bonnet
E01000304474
To open
1. Pull the release lever towards you to un-
lock the bonnet.
LHD
RHD
2. Raise the bonnet while pressing the safe-
ty lock.
NOTE
l
Only open the bonnet when the wipers are in
the parked position. In any other position,
the wipers could damage the paint or bonnet.
3. Support the bonnet by inserting the sup-
port bar in its slot.
Catalytic converter
10-03
OGAE18E1
Maintenance
10
![](/vehicles/winoney/cheloussagin/dakalon/nnthereryker.png)
CAUTION
l
Note that the support bar may disengage the
bonnet if the open bonnet is lifted by a
strong wind.
l
After inserting the support bar into the slot,
make sure the bar supports the bonnet se-
curely from falling down on to your head or
body.
To close
1. Unlatch the support bar and clip it in its
holder.
2. Slowly lower the bonnet to a position
about 20 cm above the closed position,
then let it drop.
3. Make sure the bonnet is securely locked
by softly lifting the centre of the bonnet.
CAUTION
l
Be careful that hands or fingers are not trap-
ped when closing the bonnet.
l
Before driving, make sure that the bonnet is
securely locked. An incompletely locked
bonnet can suddenly open while driving.
This can be extremely dangerous.
NOTE
l
If this does not close the bonnet, release it
from a slightly higher position.
l
Do not press down the bonnet hard with a
hand as it may damage the bonnet.
NOTE
l
For vehicles equipped with the security
alarm system, if you drive with the bonnet
left open, warning display is displayed on
the information screen in the multi-informa-
tion display.
Type 1
Type 2
Bonnet
10-04
OGAE18E1
Maintenance
10
![](/vehicles/winoney/cheloussagin/dakalon/onker.png)
Engine oil
E01000404840
To check and refill engine oil
Petrol-powered vehicles
1600 models
MAX.
MIN.
2000 models
MAX.
MIN.
Diesel-powered vehicles
1600 models
MAX. MIN.
2200 models
MAX. MIN.
The engine oil used has a significant effect
on the engine’s performance, service life and
startability. Be sure to use oil of the recom-
mended quality and appropriate viscosity.
All engines consume a certain amount of oil
during normal operation. Therefore, it is im-
portant to check the oil level at regular inter-
vals or before starting a long trip.
1. Park the vehicle on a horizontal surface.
2. Switch off the engine.
3. Wait a few minutes.
4. Remove the dipstick and wipe it with a
clean cloth.
5. Reinsert the dipstick as far as it goes.
6. Remove the dipstick and read the oil lev-
el, which should always be within the
range indicated.
7. If the oil level is below the specified
limit, remove the cap located on the cyl-
inder head cover and add enough oil to
raise the level to within the specified
range. Do not overfill to avoid engine
damage. Be sure to use the specified en-
gine oil and do not mix various types of
oil.
8. After adding oil, close the cap securely.
9. Confirm the oil level by repeating step 4
to 6.
CAUTION
l
In diesel-powered vehicles, when burning
away and removing soot accumulated in the
DPF, fuel can mix with the engine oil and an
increase in the engine oil level may occur.
This does not indicate an abnormality.
However, if the engine oil level is at or over
the “X” mark (B) on the engine oil dipstick
(A), change the engine oil.
Engine oil
10-05
OGAE18E1
Maintenance
10
![](/vehicles/winoney/cheloussagin/dakalon/plinenititou.png)
NOTE
l
The engine oil will deteriorate rapidly if the
vehicle is subjected to severe conditions, re-
quiring earlier oil replacement.
Please refer to the maintenance schedule.
l
For information on how to dispose of used
engine oil, refer to page 2-06.
Recommended engine oil vis-
cosity
Petrol-powered vehicles
l
Select engine oil of the proper SAE vis-
cosity number according to the atmos-
pheric temperature.
SAE 0W-20, 0W-30, 5W-30, and 5W-40
engine oils can only be used if they meet
ACEA A3/B3, A3/B4 or A5/B5 and API
SM (or higher) specifications.
l
Use engine oil conforming to the follow-
ing classification:
• API classification: “For service SM”
or higher
• ILSAC certificated oil
• ACEA classification:
“For service A1/B1, A3/B3, A3/B4, or
A5/B5”
NOTE
l
Use of additives is not recommended since
they may reduce the effectiveness of addi-
tives already included in the engine oil. It
may result in failure of the mechanical as-
sembly.
Diesel-powered vehicles
1600 models
l
Use the following engine oil.
• Recommended engine oil:
“TOTAL QUARTZ INEO FIRST
0W-30”
“TOTAL ACTIVA INEO ECS
5W-30”
2200 models
l
Select engine oil of the proper SAE vis-
cosity number according to the atmos-
pheric temperature.
Engine oil
10-06
OGAE18E1
Maintenance
10
![](/vehicles/winoney/cheloussagin/dakalon/zzo.png)
l
Use engine oil conforming to the follow-
ing classification:
• ACEA classification:
“For service C1, C2, C3 or C4”
• JASO classification:
“For service DL-1”
If those classifications are not available,
contact a MITSUBISHI MOTORS Au-
thorized Service Point.
NOTE
l
Use of additives is not recommended since
they may reduce the effectiveness of addi-
tives already included in the engine oil. It
may result in failure of the mechanical as-
sembly.
Engine coolant
E01000503437
To check the coolant level
A transparent coolant reserve tank (A) is lo-
cated in the engine compartment.
The coolant level in this tank should be kept
between the “LOW” and “FULL” marks
when measured while the engine is cold.
Except for diesel-powered vehicles 1600 models
FULL
LOW
Diesel-powered vehicles 1600 models
FULL
LOW
To add coolant
The cooling system is a closed system and
normally the loss of coolant should be very
slight. A noticeable drop in the coolant level
could indicate leakage. If this occurs, we rec-
ommend you to have the system checked as
soon as possible.
If the level should drop below the “LOW”
level on the reserve tank, open the lid and
add coolant.
Also, if the reserve tank is completely empty,
remove the radiator cap (B) and add coolant
until the level reaches the filler neck.
WARNING
l
Do not open the radiator cap (B) while the
engine is hot. The coolant system is under
pressure and any hot coolant escaping
could cause severe burns.
Anti-freeze
The engine coolant contains an ethylene gly-
col anti-corrosion agent. Some parts of the
engine are cast aluminium alloy, and periodic
changing of the engine coolant is necessary
to prevent corrosion of these parts.
Engine coolant
10-07
OGAE18E1
Maintenance
10
![](/vehicles/winoney/cheloussagin/dakalon/thota.png)
Except for diesel-powered 1600
models
Use “MITSUBISHI MOTORS GENUINE
SUPER LONG LIFE COOLANT PREMI-
UM” or equivalent*.
*: similar high quality ethylene glycol based
non-silicate, non-amine, non-nitrate and non-
borate coolant with long life hybrid organic
acid technology.
MITSUBISHI MOTORS GENUINE Coolant
has excellent protection against corrosion and
rust formation of all metals including alumi-
nium and can avoid blockages in the radiator,
heater, cylinder head, engine block, etc.
Diesel-powered 1600 models
Use “ALTECO Freecor DSC, BASF Glysan-
tin Alu Protect Premium/G30 or G33, or Bru-
garolas Bradol 497”.
This coolant has excellent protection against
corrosion and rust formation of all metals in-
cluding aluminium and can avoid clogs in the
radiator, heater, cylinder head, engine block,
etc.
Because of the necessity of this anti-corro-
sion agent, the coolant must not be replaced
with plain water even in summer.
Because of the necessity of this anti-corro-
sion agent, the coolant must not be replaced
with plain water even in summer. The re-
quired concentration of anti-freeze differs de-
pending on the expected ambient tempera-
ture.
Above -35 °C: 50 % concentration of anti-
freeze
Below -35 °C: 60 % concentration of anti-
freeze
CAUTION
l
Do not use alcohol or methanol anti-freeze
or any engine coolants mixed with alcohol
or methanol anti-freeze. The use of an im-
proper anti-freeze can cause corrosion of the
aluminium components.
l
Do not use water to adjust the concentration
of coolant.
l
Concentrations exceeding 60 % will result in
a reduction of both the anti-freeze and cool-
ing performance thus adversely affecting the
engine.
l
Do not top up with water only.
Water by itself reduces the rust-protective
and anti-freeze qualities of the coolant and
has a lower boiling point. It can also cause
damage to the cooling system if it should
freeze. Do not use tapwater, as it can cause
corrosion and rust formation.
During cold weather
If the temperatures in your area drop below
freezing, there is the danger that the coolant
in the engine or radiator could freeze and
cause severe damage to the engine and/or ra-
diator. Add a sufficient amount of anti-freeze
to the coolant to prevent it from freezing.
The concentration should be checked before
the start of cold weather and anti-freeze add-
ed to the system if necessary.
Washer fluid
E01000702227
Open the washer fluid reservoir cap and
check the level of washer fluid with the dip-
stick.
If the level is low, replenish the container
with washer fluid.
FULL
EMPTY
Washer fluid
10-08
OGAE18E1
Maintenance
10
![](/vehicles/winoney/cheloussagin/dakalon/pin.png)
NOTE
l
The washer fluid container serves the wind-
screen, rear window and headlamps (if so
equipped).
During cold weather
To ensure proper operation of the washers at
low temperatures, use a fluid containing an
anti-freezing agent.
Brake fluid/Clutch fluid*
E01000801902
The brake fluid and the clutch fluid share the
reservoir tank.
To check the fluid level
The fluid level must be between the “MAX”
and “MIN” marks on the reservoir.
The fluid level is monitored by a float. When
the fluid level falls below the “MIN” mark,
the brake fluid warning lamp lights up.
The fluid level falls slightly with wear of the
brake pads, but this does not indicate any ab-
normality.
The fluid in the master cylinder should be
checked when doing other work under the
bonnet. The brake system should also be
checked for leakage at the same time.
If the fluid level falls markedly in a short
length of time, it indicates leaks from the
brake system.
If this occurs, we recommend you to have the
vehicle checked.
Fluid type
Use brake fluid conforming to DOT3 or
DOT4 from a sealed container. The brake
fluid is hygroscopic. Too much moisture in
the brake fluid will adversely affect the brake
system, reducing the performance.
WARNING
l
Take care in handling brake fluid as it is
harmful to the eyes, may irritate your
skin and will damage painted surfaces.
Wipe up spills immediately. If brake fluid
gets on your hands or in your eyes, flush
immediately with clean water. Follow up
with a doctor as necessary.
CAUTION
l
Use only the specified brake fluid.
Do not mix or add different brands of brake
fluid to prevent chemical reactions.
Do not let any petroleum-based fluid touch,
mix with, or get into the brake fluid.
This will damage the seals.
l
Keep the reservoir tank cap closed to pre-
vent the brake fluid from deteriorating ex-
cept maintenance.
l
Clean the filler cap before removing and
close the cap securely after maintenance.
Battery
E01001203646
The condition of the battery is very important
for quick starting and to keep the vehicle’s
electrical system working properly. Regular
inspection and care are especially important
in cold weather.
Brake fluid/Clutch fluid*
10-09
OGAE18E1
Maintenance
10
![](/vehicles/winoney/cheloussagin/dakalon/sstr.png)
NOTE
l
After replacing the battery, the electronic
control system data for the automatic trans-
mission, etc., will be erased. As a result,
shift shocks may occur.
Shift shocks will become smoother after sev-
eral changes in speed.
Checking battery electrolyte
level
Except for diesel-powered vehicles 1600 models
Diesel-powered 1600 models
The electrolyte level must be between the
specified limit on the outside of the battery.
Replenish with distilled water as necessary.
The inside of the battery is divided into sev-
eral compartments; remove the cap from each
compartment and fill to the upper mark. Do
not top up beyond the upper mark because
spillage during driving could cause damage.
Check the electrolyte level at least once every
4 weeks, depending on the operating condi-
tions.
If the battery is not used, it will discharge by
itself with time.
Check it once every 4 weeks and charge with
low current as necessary.
NOTE
l
Except for diesel-powered 1600 models, to
replenish with the distilled water, remove
the upper cover and duct.
Refer to “Removing and installing the upper
cover and duct” on page 10-10.
Removing and installing the
upper cover and duct
E01010700112
WARNING
l
Turn the ignition switch to the “LOCK”
position or put the operation mode in
OFF.
Make sure that your clothes cannot be
caught by the fan or drive belt. Personal
injury could result.
To remove
1. Remove the clips (A), and then remove
the upper cover (B).
Battery
10-10
OGAE18E1
Maintenance
10
![](/vehicles/winoney/cheloussagin/dakalon/uive.png)
2. Remove the clips (C), and then remove
the air duct (D).
To install
1. Install the air duct (A), and then tighten
the clips (B).
2. Turn the upper cover over. Squeeze the
head of the moulding clip (C) with pliers
and remove the moulding.
3. Install the upper cover, and then attach
the moulding (D).
NOTE
l
Attach the moulding with the wide part to-
wards the front of the vehicle.
4. Install the clips (E).
During cold weather
E01010900068
The capacity of the battery is reduced at low
temperatures. This is an inevitable result of
its chemical and physical properties.
This is why a very cold battery, particularly
one that is not fully charged, will only deliver
a fraction of the starter current which is nor-
mally available.
We recommend you to have the battery
checked before the start of cold weather and,
if necessary, have it charged or replaced.
This does not only ensure reliable starting,
but a battery which is kept fully charged also
has a longer life.
Battery
10-11
OGAE18E1
Maintenance
10
![](/vehicles/winoney/cheloussagin/dakalon/paponen.png)
Disconnection and connection
E01011001223
To disconnect the battery cable, stop the en-
gine, first disconnect the negative (-) terminal
and then the positive (+) terminal. When con-
necting the battery, first connect the positive
(+) terminal and then the negative (-) termi-
nal.
NOTE
l
Open the terminal cover (A) before discon-
necting or connecting the positive (+) termi-
nal of the battery.
l
Loosen the nut (B), and then disconnect the
battery cable from the positive (+) terminal.
Petrol-powered vehicles
NOTE
Diesel-powered vehicles
WARNING
l
Keep sparks, cigarettes, and flames away
from the battery because the battery
could explode.
l
The battery electrolyte is extremely caus-
tic. Do not allow it to come in contact with
your eyes, skin, clothing, or the painted
surfaces of the vehicle.
Spilt electrolyte should be flushed imme-
diately with ample amounts of water.
Irritation to eyes or skin from contact
with electrolyte requires immediate medi-
cal attention.
l
Ventilate when charging or using the bat-
tery in an enclosed space.
CAUTION
l
Keep it out of reach of children.
CAUTION
l
Never disconnect the battery with the igni-
tion switch or the operation mode in ON.
Doing so could damage electric components.
l
Never short-circuit the battery. This could
cause it to overheat and be damaged.
l
If the battery is to be quick-charged, first
disconnect the battery cables.
l
In order to prevent a short circuit, be sure to
disconnect the negative (-) terminal first.
l
Always wear protective eye goggles when
working near the battery.
l
Do not bring the nearby parts, the plastic
parts and so on into contact with sulphuric
acid (battery electrolyte) which may crack,
stain or discolour them.
If they are in contact, wipe off with soft
cloth, chamois or the like and an aqueous
solution of neutral detergent then immedi-
ately rinse the affected parts with plenty of
water.
NOTE
l
Keep the terminals clean. After the battery is
connected, apply terminal protection grease.
To clean the terminals, use lukewarm water.
l
Check to see if the battery is securely instal-
led and cannot be moved during travel. Also
check each terminal for tightness.
Battery
10-12
OGAE18E1
Maintenance
10
![](/vehicles/winoney/cheloussagin/dakalon/htro.png)
NOTE
l
When the vehicle is to be left unused for a
long period of time, remove the battery and
store it in a place where the battery fluid will
not freeze. The battery should be stored only
in a fully charged condition.
Tyres
E01001300255
WARNING
l
Driving with tyres that are worn, dam-
aged or improperly inflated can lead to a
loss of control or blow out of the tyres
which can result in a collision with serious
or fatal injury.
Tyre inflation pressures
E01001404371
Item
Tyre size
Front
Rear
At trailer towing
Front
Rear
Normal tyre
215/65R16 98H
2.4 bar (35 psi) [240 kPa]
*1
,
2.6 bar (38 psi) [260 kPa]
2.4 bar (35 psi) [240 kPa]
*1
,
2.6 bar (38 psi) [260 kPa]
215/70R16 100H
2.6 bar (38 psi) [260 kPa]
2.6 bar (38 psi) [260 kPa]
215/60R17 96H
2.2 bar (32 psi) [220 kPa]
2.2 bar (32 psi) [220 kPa]
225/55R18 98V
2.2 bar (32 psi) [220 kPa]
2.2 bar (32 psi) [220 kPa]
P225/55R18 97H
2.2 bar (32 psi) [220 kPa],
2.3 bar (33 psi) [230 kPa]
*2
2.2 bar (32 psi) [220 kPa],
2.3 bar (33 psi) [230 kPa]
*2
Temporary spare tyre
T155/90D16
4.2 bar (60 psi) [420 kPa]
—
215/65R16
2.4 bar (35 psi) [240 kPa]
—
215/70R16
2.6 bar (38 psi) [260 kPa]
—
*1
: Vehicles for Russia, Kazakhstan, Moldova and Ukraine
*2
: Vehicles for Russia, Kazakhstan, Moldova, Ukraine and 2200 models
Tyres
10-13
OGAE18E1
Maintenance
10
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст