Mitsubishi Outlander (2003+). Manual — part 414
COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL
54A-51
STEP 2. Connector check: Combination meter
connector C-04 and engine-ECU connector C-136
or engine-A/T-ECU connector C-141
Q: Is combination meter connector C-04 and
engine-ECU connector C-136 or engine-A/T-ECU
conector C-141 in good condition?
YES :
Go to Step 3
NO :
Repair or replace the damage
component(s).
STEP 3. Retest the system.
Q: Is the tachometer normal?
YES :
Intermittent Malfunction. Refer to GROUP
00, How to Use Troubleshooting/Inspection
Service Points-How to Cope with
Intermittent Malfunction
NO :
Go to Step 4
AC308716
Connector: C-04 <LHD>
C-04 harness side
AR
AC308769
Connector: C-04 <RHD>
C-04 harness side
AS
AC308719
AE
C-136 or C-141(GR)
Connector: C-136 or C-141 <LHD>
Harness side
C-136
C-141
AC308735
C-141(GR)
Connector: C-141 <RHD>
Harness side
AQ
COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL
54A-52
STEP 4. Check the wiring harness between
combination meter connector C-04 (terminal 47)
and engine-ECU connector C-136 (terminal 58) or
engine-A/T-ECU connector C-141 (terminal 87)
NOTE:
Prior to the wiring harness inspection, check
intermediate connector C-105, and repair if
necessary.
Q: Is the wiring harness between combination meter
connector C-04 (terminal 47) and engine-ECU
connector C-136 (terminal 58) or engine-A/T-ECU
connector C-141 (terminal 87) in good condition?
YES :
Replace the combination meter assembly.
NO :
Repair or replace the damage
component(s).
AC308716
Connector: C-04 <LHD>
C-04 harness side
AR
AC308769
Connector: C-04 <RHD>
C-04 harness side
AS
AC308719
AE
C-136 or C-141(GR)
Connector: C-136 or C-141 <LHD>
Harness side
C-136
C-141
AC308735
C-141(GR)
Connector: C-141 <RHD>
Harness side
AQ
AC308718
AO
Connector: C-105 <LHD>
C-105
AC308735
AT
Connector: C-105 <RHD>
C-105
COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL
54A-53
INSPECTION PROCEDURE 4: Fuel gauge does not work (the other meters work.)
TECHNICAL DESCRIPTION (COMMENT)
If only the fuel gauge does not operate, fuel gauge
unit <2WD>, the fuel pump and gauge unit <4WD>,
the combination meter, wiring harness or
connector(s) may be defective.
TROUBLESHOOTING HINTS
•
Malfunction of the fuel gauge unit.
•
The wiring harness or connectors may have
loose, corroded, or damaged terminals, or
terminals pushed back in the connector.
•
Malfunction of the combination meter.
Wire colour code
B : Black LG : Light green G : Green L : Blue
W : White Y : Yellow SB : Sky blue BR : Brown
O : Orange GR : Gray R : Red P : Pink V : Violet
COMBINATION
METER
CONTROL
CIRCUIT
F/GA
FUEL
GAUGE UNIT (SUB)
FUEL PUMP
AND GAUGE UNIT (MAIN)
FUEL
GAUGE UNIT
2WD 4WD
Fuel Gauge Circuit
COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL
54A-54
DIAGNOSIS PROCEDURE
STEP 1. Check the fuel gauge circuit.
(1) Disconnect D-15 <2WD> fuel gauge unit
connector or D-16 <4WD> fuel pump and gauge
unit (main) connector.
(2) Connect a test lamp (12 V
−
3.4 W) via test
harness (MB991219) between the wiring harness
connector terminals 1 and 2.
(3) Turn the ignition switch to the "ON" position.
Q: Does the test lamp illuminate?
YES :
Go to Step 8.
NO :
Go to Step 2.
STEP 2. Connector check: Combination meter
connector C-04, fuel gauge unit connector D-15
<2WD> or fuel pump and gauge unit (main)
connector D-16 <4WD>
Q: Is combination meter connector C-04, fuel gauge
unit connector D-15 <2WD> or fuel pump and
gauge unit (main) connector D-16 <4WD> in good
condition?
YES :
Go to Step 3.
NO :
Repair or replace the damaged
component(s).
AC103414
AC211647
3 2 1
1
2
3
4
5
Test lamp
(12 V - 3.4 W)
MB991219
D-15 <2WD>
Harness side
D-16 <4WD>
Harness side
AC
AC308716
Connector: C-04 <LHD>
C-04 harness side
AR
AC308769
Connector: C-04 <RHD>
C-04 harness side
AS
AC308783
Connectors: D-15<2WD>, D-16<4WD>
<LHD>
AF
D-15 (B)
D-16 (GR)
D-15<2WD>
D-16<4WD>
harness side
harness side
3 2 1
1
2
3
4
5
AC308787
Connector: D-16 <4WD>
<RHD>
AF
D-16 (GR)
harness side
1
2
3
4
5
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст