Mitsubishi Outlander (2003+). Manual — part 545
CONDENSER AND CONDENSER FAN MOTOR
HEATER, AIR CONDITIONER AND VENTILATION
55A-75
REMOVAL SERVICE POINT
<<A>> FLEXIBLE SUCTION HOSE AND LIQUID
PIPE A DISCONNECTION
CAUTION
As the compressor oil and receiver are highly
moisture absorbent, use a non-porous material
to plug the hose and nipples.
To prevent the entry of dust or other foreign bodies,
plug the dismantled hose and condenser assembly
nipples.
INSTALLATION SERVICE POINT
>>A<< CONDENSER INSTALLATION
When replacing the condenser, refill it with a
specified amount of compressor oil and install it. (to
the vehicle).
Compressor oil: SUN PAG 56
Quantity: 15 mL
AC309387
12
13
11
10
9
11
1, 2
A/C compressor oil:
SUN PAG 56
-Pipe coupling
O ring
AB
<2400>
8
7
5
N
6
4
14
2
1
3
4.9 ± 0.9 N·m
N
Condenser removal steps
<<A>>
1.
Liquid pipe A connection
<<A>>
2.
Flexible discharge hose connection
3.
O ring
>>A<<
4.
Condenser assembly
5.
Receiver
6.
Clamp
7.
O ring
8.
Condenser
Fan shroud assembly removal
steps
9.
Fan shroud assembly
10. Fan
11. Fan motor
12. Heat protector
13. Fan shroud
Air guide panel removal steps
•
Front bumper (Refer to 51, Front
bumper
).
14. Air guide panel
CONDENSER AND CONDENSER FAN MOTOR
HEATER, AIR CONDITIONER AND VENTILATION
55A-76
INSPECTION
M1552014301276
CONDENSER FAN MOTOR CHECK
Check to be sure that the condenser fan motor
operates when battery voltage is applied to terminal
2 and terminal 1 earthed.
AC103523
1 2
<2000>
AE
AC309386
1 2
<2400>
AB
REFRIGERANT LINE
HEATER, AIR CONDITIONER AND VENTILATION
55A-77
REFRIGERANT LINE
REMOVAL AND INSTALLATION
M1552006400480
Pre-removal and Post-installation Operation
•
Refrigerant Draining and Refilling (Refer to Charging and Discharging
•
Air cleaner cover and air flow sensor assembly Removal and Installation (Refer to GROUP 14, Air cleaner
<2000> or
<2400> ).
•
Radiator Grille Removal and Installation (Refer to GROUP 51, Radiator Grille
AC309406
7
N
4
12 ± 2 N·m
5
Low-pressure side
service valve
1
7
N
High-pressure
side service valve
3
7
N
2
25 ± 4 N·m
AB
2, 3, 4, 5
5
A/C compressor oil:SUN PAG 56
6
O ring
O ring
Pipe connection
Removal steps
<<A>>
1.
A/C pressure sensor
<<A>>
2.
Flexible discharge hose
<<A>>
3.
Liquid pipe A
<<A>>
>>A<<
4.
Flexible suction hose
<<A>>
5.
Liquid pipe B
6.
Evaporator cover
7.
O ring
Removal steps (Continued)
REFRIGERANT LINE
HEATER, AIR CONDITIONER AND VENTILATION
55A-78
REMOVAL SERVICE POINT
<<A>> HOSE/PIPE DISCONNECTION
CAUTION
As the compressor oil and receiver are highly
moisture absorbent, use a non-porous material
to plug the hose and nipples.
To prevent the entry of other foreign bodies, plug the
condenser, compressor, and expansion valve
nipples.
INSTALLATION SERVICE POINT
>>A<< SUCTION HOSE INSTALLATION
When replacing the suction hose, refill them with a
specified amount of compressor oil, and then install
them.
Compressor oil: SUN PAG 56
Quantity: Suction hose: 10 cm
3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст