Mitsubishi Outlander (2003+). Manual — part 205
TROUBLESHOOTING <A/T>
AUTOMATIC TRANSMISSION (FF)
23A-115
OPERATION
The shift switch assembly detects the shift range
(sport mode) which the driver has selected, and
sends the information to the engine-A/T-ECU.
COMMENTS ON TROUBLE SYMPTOM
The cause is probably a malfunction of the shift
switch and engine-A/T-ECU.
Possible causes
•
Malfunction of shift switch assembly
•
Damaged harness wires and connectors
•
Malfunction of the engine-A/T-ECU
ENGINE-
A/T-ECU
IGNITION
SWITCH (IG1)
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
SHIFT
SWITCH
ASSEMBLY
SHIFT
SWITCH
SELECT
SWITCH
COMBINATION
METER
INHIBITOR
SWITCH
AC309570AC
Shift switch system circuit <LHD>
TROUBLESHOOTING <A/T>
AUTOMATIC TRANSMISSION (FF)
23A-116
DIAGNOSIS
STEP 1. MUT-II/III diagnosis code
Either of diagnosis codes 27 or 28 is set, inhibtor
switch is defective.
Q: Are diagnosis codes 27 or 28 output?
YES <diagnosis code 27 is set> :
Refer to
diagnosis code 27: Inhibitor switch system
YES <diagnosis code 28 is set> :
Refer to
diagnosis code 28: Inhibitor switch system
NO :
Go to Step 2.
STEP 2. MUT-II/III data list
•
Item 67: Select switch
•
Item 68: Upshift switch
•
Item 69: Downshift switch
Check the above data list (Refer to data list reference
table
Q: Is the check result normal?
YES :
Intermittent malfunction (Refer to GROUP
00
−
How to Cope with Intermittent
Malfunction
).
NO <"NG" for all items> :
Go to Step 3.
NO <"NG" for items 68 and 69> :
Go to Step 5.
NO <"NG" for item 67> :
Go to Step 10.
NO <"NG" for item 68> :
Go to Step 19.
NO <"NG" for item 69> :
Go to Step 22.
TROUBLESHOOTING <A/T>
AUTOMATIC TRANSMISSION (FF)
23A-117
STEP 3. Connectors check: C-129 <RHD>, C-143
<LHD> shift switch assembly connector, C-141
engine-A/T-ECU connector, C-105 intermediate
connector <RHD>
Check for the contact with terminals.
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Repair the defective connector.
STEP 4. MUT-II/III data list
•
Item 67: Select switch
•
Item 68: Upshift switch
•
Item 69: Downshift switch
Check the above data list (Refer to data list reference
table
Q: Is the check result normal?
YES :
Intermittent malfunction (Refer to GROUP
00
−
How to Cope with Intermittent
Malfunction
).
NO :
Replace the engine-A/T-ECU.
STEP 5. Check the shift switch assembly.
Refer to
<RHD> or
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Replace the shift switch assembly.
AC308735
BI
C-129
Harness side
Connector: C-129
<RHD>
AC308718
BD
C-143
Connector: C-143
<LHD>
Harness side
AC309479 AE
Connector: C-141 <LHD>
Connector: C-141 <RHD>
Engine-A/T-ECU
Harness side
Engine-A/T-ECU
C-141 (GR)
C-141 (GR)
AC308735
AW
C-105
Connector: C-105
<RHD>
10
1
21
16
13
4
11
2
12
3
1415
1718
5
20
7
19
6
8
22
9
TROUBLESHOOTING <A/T>
AUTOMATIC TRANSMISSION (FF)
23A-118
STEP 6. Connector check: C-129 <RHD>, C-143
<LHD> shift switch assembly connector
Check for the contact with terminals.
Q: Is the check result normal?
YES :
Go to Step 7.
NO :
Repair the defective connector.
STEP 7. Measure the voltage at shift switch
assembly connector C-129 <RHD>, C-143 <LHD>
(1) Disconnect the connector, and measure the
voltage between terminal 3 and earth at the
wiring harness side.
(2) Ignition switch: ON
OK: System voltage
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Go to Step 8.
AC308735
BI
C-129
Harness side
Connector: C-129
<RHD>
AC308718
BD
C-143
Connector: C-143
<LHD>
Harness side
AC308735
BI
C-129
Harness side
Connector: C-129
<RHD>
AC308718
BD
C-143
Connector: C-143
<LHD>
Harness side
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст